1616710380 Air‑End | Atlas Copco GX2‑5 C40 Screw Compressor

1616710380 Air‑End | Atlas Copco GX2‑5 C40 Screw Compressor
Details:
Brand: Atlas Copco
Model Compatibility: 1616710380 and upgraded version 1616710390
Applicable Models: Atlas Copco GX2-5 C40 Series
Material: Stainless steel rotor and high-strength cast housing
Features: Wear-resistant and corrosion-resistant
Operating Temperature: 46°C (high-temperature environment)
Quality Certification: ISO-compliant
Packaging: Protected in neutral wooden crates
Warranty: 6-12 months
Pre-shipment video verification: Provided
Send Inquiry
Description
Send Inquiry

 

Product Overview

 

Part number 1616710380 is the core screw rotor‑bearing air‑end assembly for Atlas Copco GX2‑5 C40 oil‑injected rotary screw compressors. It performs the actual air compression process and represents the highest‑value core component of the whole compressor system. Its counterpart variant part number 1616710390 is an upgraded rotor‑coating revision.

 

Critical Compatibility Warning: 1616710380 alone cannot guarantee perfect fitment. The upgraded variant 1616710390 is not unconditionally interchangeable. Differences in unit hardware revision, fixed‑speed / VSD configuration, original rotor coating specification will affect compatibility. Always submit full compressor serial‑number plus old air‑end name‑plate photo for our cross‑verification before you place an order, avoid expensive downtime caused by mismatched parts.

 

Very important installation note: This air‑end is NOT plug‑and‑play. Matching flange dimension does not mean ready‑to‑run after bolting. Replacement work requires precise shaft‑to‑motor coupling alignment, full old oil‑circuit flushing, mandatory step‑by‑step low‑load run‑in cycle. Direct full‑load startup without run‑in will result in premature bearing damage and rotor failure even with brand‑new air‑end.

 

Buyers for industrial compressor spare‑parts face three main options for GX‑series damaged air‑end:

 

1. Brand‑new OEM air‑end: Factory‑new assembly, original coated cast‑iron rotors and brand‑new bearings, full factory traceability. Best choice for critical‑uptime production assets.

2. Rebuilt / refurbished air‑end: Used air‑end fully disassembled, bearing replaced, rotors inspected & re‑coated. Cost‑optimized alternative for non‑critical production lines.

3. Aftermarket copy air‑end: Third‑party manufactured assembly without original factory specification, higher long‑term risk of efficiency drop and early wear.

 

Decision guidance: Consider full new air‑end swap‑out when you meet rotor seizure, severe rotor tooth scuffing or cracked housing. Minor bearing wear may be solved by professional rebuild service.

Service‑life remark: Published long‑life figures are valid only under clean intake air, qualified compressor lubricant and strict scheduled maintenance. Real‑world service life heavily depends on site dust, humidity and duty‑cycle.

 

Customer Buying & Maintenance Priorities

 

 

Industrial buyers evaluating Atlas Copco GX‑series air‑end do not decide purely on unit price. These core concerns are fully addressed within this page:

1. Fitment accuracy risk: Same part‑number may have coating / hardware revisions. Serial‑number cross‑validation is mandatory to prevent wrong‑part delivery and production halt.

2. Clear product‑grade definition: Distinguish brand‑new OEM / rebuilt / aftermarket copy; understand cost‑vs‑risk trade‑off for your production line.

3. Installation risk awareness: Not plug‑and‑play; coupling alignment, oil‑circuit flushing, mandatory run‑in are non‑negotiable steps for long‑term reliability.

4. Fault‑decision logic: Know when to replace air‑end and when to select rebuild service.

5. Warranty scope clarity: Understand what failure modes are covered, and which damages are excluded (mis‑alignment, skipped run‑in, wrong lubricant).

6. Pre‑shipment validation: Factory test documentation, visual inspection, export‑grade anti‑rust & wooden‑crate packaging for oversea shipment.

7. Bulk & project‑procurement: Stable lead‑time for compressor‑service‑company stocking, combined‑kit options with consumable spare‑parts.

8. Post‑sales technical backup: Alignment, flushing and run‑in reference guidance for on‑site technicians.

 

Compatibility & Pre‑Order Verification Checklist

 

OEM Part Number:1616710380

Related upgraded variant PN:1616710390 (improved rotor‑coating, not fully interchangeable without serial‑number check)

Product Type:Screw rotor‑bearing air‑end assembly

Applicable Compressor:Atlas Copco GX2‑5 C40 oil‑injected rotary screw compressor

 

Information we require before quotation:

1. Full compressor serial‑number from machine name‑plate

2. Clear photo of old air‑end name‑plate marking

3. Confirm compressor configuration: fixed‑speed or VSD variable‑speed

4. Site working‑condition: indoor / dusty environment, 24h continuous‑run or intermittent duty

5. Requirement: single emergency replacement / bulk stock / project order

 

Replacement decision reference:

‑ Recommend new air‑end: rotor seizure, heavy rotor‑profile scuffing, cracked housing

‑ Evaluate rebuild option: only minor bearing wear, rotor profile remains intact

 

 

Core Functional Benefits

 

1. Restore original OEM compression performance

Original‑spec coated cast‑iron twin‑screw rotors. Properly‑installed 1616710380 air‑end recovers original free‑air‑delivery FAD, brings back designed output capacity of your GX2‑5 C40 unit, eliminates low‑air‑output caused by worn rotor profile.

2. Heavy‑duty bearing assembly for industrial duty‑cycle

Matched high‑grade bearings withstand high radial‑axial load under continuous industrial operation. Mandatory run‑in procedure after installation is required to achieve expected bearing service‑life.

3. Factory dynamic balancing treatment Every new air‑end completes factory dynamic balancing test. Controlled vibration level protects motor, coupling and whole compressor base‑frame; reduces fatigue damage for piping and auxiliary components.

4. Original‑equivalent mounting‑foot & port geometry Mounting foot, suction & discharge port dimension matches OEM GX‑series housing layout. No large‑scale frame modification required for swap‑out. Still requires precise coupling alignment regardless of matching dimension.

5. Reduce unplanned downtime for production facility For aging GX‑series compressor where old air‑end suffers severe damage, qualified replacement air‑end avoids full‑machine investment, restores production compressed‑air supply.

 

 

Technical Specification

 

Parameter Value
Part Number 1616710380
Upgrade variant PN 1616710390 (improved rotor coating, check serial‑number before interchange)
Assembly Type Oil‑injected twin‑screw air‑end rotor‑bearing assembly
Rotor material Coated cast‑iron screw rotors
Working pressure range 7‑13 bar(e)
Rated speed Matches GX2‑5 C40 compressor specification
Noise level (1‑meter) ≤68 dB(A) (factory test baseline)
Reference design lifetime Depends on intake quality, lubricant and maintenance regime
MOQ 1 Piece
Shipment DHL/FedEx/UPS express, air freight, sea‑freight with export fumigated wooden crate
Payment Terms T/T, PayPal, Western Union
Important Remark NOT plug‑and‑play; coupling alignment, oil‑circuit flushing & step‑by‑step run‑in mandatory after installation

 

Risk Comparison:New OEM vs Rebuilt vs Aftermarket Copy Air‑End

 

1. Brand‑new OEM air‑end 1616710380

✅ Original coated‑rotor, brand‑new bearings, factory dynamic balance, part traceability

✅ Suitable for critical 24‑h production line

❌ Higher upfront procurement cost

2. Rebuilt / refurbished air‑end

✅ Lower purchase price, viable for non‑critical equipment

⚠️ Quality fully depends on rebuilder process standard; rotor coating condition needs verification

⚠️ Rebuilt unit warranty cycle is normally shorter than brand‑new OEM

3. Generic aftermarket copy air‑end

✅ Lowest initial cost

❌ Unverified rotor profile, inferior bearing grade; risk of efficiency drop, abnormal vibration, early failure; no official part traceability

 

Cost insight: Saving money by selecting low‑grade air‑end will easily cause multi‑fold losses: production downtime, motor damage, auxiliary component secondary failure. Air‑end is the highest‑risk core investment of your compressor.

 

Typical Application Scenarios

 

This 1616710380 air‑end serves industrial facilities operating matched Atlas Copco GX2‑5 C40 screw compressors:

‑ General manufacturing & metal‑working workshops

‑ Automotive assembly & paint shops

‑ Plastic‑processing production‑lines

‑ Packaging & light‑industry plants

‑ Compressor service & rental companies for spare‑part stocking

 

Evaluate air‑end replacement project when you observe: rotor locked seizure, obvious metal grinding noise, permanent drop of free‑air output, persistent high vibration which rebuild cannot repair.

 

Critical On‑Site Installation & Commissioning Guidance

 

Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Cut off main power before any mechanical work on drive‑train components. Wrong rotation direction, mis‑alignment will destroy brand‑new air‑end rapidly.

 

1. Pre‑installation system preparation (most‑skipped critical work)

Remove damaged old air‑end. Fully flush the whole compressor oil‑circulation loop. Remove carbon‑sludge and metal wear debris inside oil cooler, piping and oil‑filter housing. Residual metal particles will abrade brand‑new rotor‑bearing assembly quickly. Inspect motor health condition before mounting new air‑end.

2. Mounting & precise coupling shaft‑alignment

Install new 1616710380 air‑end onto base‑frame. Complete precise laser shaft‑to‑motor coupling alignment following Atlas Copco service‑manual tolerance requirement. Mis‑alignment is top root‑cause of high vibration and premature bearing failure after air‑end swap‑out. Double‑check motor rotation‑direction before final coupling fastening.

3. Mandatory step‑by‑step run‑in procedure - DO NOT run full‑load immediately

Brand‑new air‑end cannot work under full rated pressure on first startup: ‑ Phase 1: No‑load idle running 30‑60 minutes ‑ Phase 2: Step‑wise partial‑load operation ‑ Phase 3: Gradually raise to full working pressure Continuously monitor vibration value, discharge oil‑temperature and noise level during whole run‑in cycle.

4. Post‑commissioning baseline recording & consumable replacement

After finishing run‑in cycle: record baseline vibration, oil‑temperature and FAD performance data for future maintenance reference. Strongly recommend synchronous replacement of compressor lubricant, oil filter and oil‑separator together with new air‑end.

5. Troubleshooting hint after replacement

If high‑vibration / over‑temperature fault appears after swap‑out: Do NOT judge air‑end defective directly. Re‑inspect coupling alignment, motor rotation direction, oil‑circuit cleanliness and lubricant quality.

 

Spare‑Part Planning & Bulk‑Procurement Guidance

 

For factory‑maintenance‑teams and compressor‑service‑contractors:

 

1. Emergency single‑unit order: Fast air‑express for sudden breakdown to minimize production‑downtime.

2. Quarterly / annual bulk‑procurement: Planned maintenance project, better unit‑price and predictable lead‑time.

3. Combined‑consumable‑kit: Bundle air‑end with matching air‑filter, oil‑filter, oil‑separator for complete service package, lower per‑unit logistics‑cost.

4. Reserved‑stock solution: We can reserve inventory for regular customers against global spare‑part supply fluctuation.

5. Pre‑shipment inspection: Visual check, anti‑rust preservation treatment, export fumigated wooden crate packing; inspection photos / test report available upon bulk‑order request.

 

Inventory suggestion: For critical 24‑h running GX‑series compressor, evaluate keeping spare core‑component lead‑time documented in your maintenance plan; international shipping lead‑time may cause extended production halt in case of sudden failure.

 

Frequently Asked Questions

 

Q1: Is 1616710380 air‑end plug‑and‑play after bolting onto base frame?

A: No, it is not plug‑and‑play. Even mounting dimension matches perfectly, precise coupling alignment, full oil‑circuit flushing and mandatory step‑by‑step low‑load run‑in procedure are required. Direct full‑load startup causes premature bearing & rotor damage.

Q2: Can 1616710380 directly replace 1616710390?

A: Not unconditionally interchangeable. 1616710390 is upgraded rotor‑coating variant. Hardware revision and compressor configuration will decide compatibility. Submit compressor serial‑number for cross‑verification before ordering.

Q3: When should I choose brand‑new air‑end instead of rebuilt service for GX‑series compressor?

A: Select brand‑new OEM air‑end for rotor seizure, heavy rotor‑profile scuffing, cracked housing or 24‑h critical‑production‑line. Minor bearing‑wear with intact rotor profile may adopt professional rebuild as cost‑saving alternative.

Q4: What damage is NOT covered under air‑end limited warranty?

A: Limited product‑warranty only covers manufacturing‑related defects of air‑end assembly itself. Excluded: damage caused by mis‑alignment, skipped run‑in, wrong‑grade lubricant, intake heavy dust contamination; on‑site technician labor, installation cost and return‑shipment freight are not included.

Q5: New‑installed air‑end shows high vibration, does that mean defective air‑end?

A: Not necessarily. Most high‑vibration cases root in poor coupling alignment, wrong motor rotation‑direction, residual metal debris inside oil‑circuit. Inspect those items before judging air‑end quality‑defect.

Q6: What pre‑shipment inspection do you provide for 1616710380 air‑end?

A: Visual inspection for rotor & housing condition, anti‑rust preservation treatment, export‑grade fumigated wooden crate packing. Bulk‑order customers can request inspection photos before dispatch.

 

Why Source 1616710380 Air‑‑End From Us

 

‑ Pre‑order compatibility validation: Submit compressor serial‑number and old air‑end name‑plate photo. Our technical‑team cross‑check part‑number, variant revision and unit configuration before shipment, avoid mis‑fit.

‑ Pre‑shipment quality check: Visual inspection of rotor, bearing‑housing and sealing surface; anti‑rust preservation for over‑sea long‑distance transit.

‑ Export‑oriented heavy‑duty fumigated wooden‑crate packaging for sea / air freight transportation.

‑ Technical‑reference support: Provide alignment, oil‑flushing and run‑in checklist document for on‑site technician reference after order confirmation.

 

Hot Tags: 1616710380 Air‑End | Atlas Copco GX2‑5 C40 Screw Compressor, China 1616710380 Air‑End | Atlas Copco GX2‑5 C40 Screw Compressor manufacturers, suppliers, 2236050100, 1616710380, 1616757590, C40 GX5 Atlas Copco Air Compressor Air End, 1616710371, Atlas Copco Air Compressor Air end

Send Inquiry