Product Introduction
Atlas Copco Screw Air Compressor Oil Filter 1621875000 is a high-efficiency oil filtration system designed for screw air compressors. It is made of high-quality materials to ensure stable oil purification in the compressed air system. The filter element can effectively remove impurities, moisture and particulate matter in the compressed oil, thereby extending the service life of the compressor and improving operating efficiency.
1.Filtering precision:0. 1 Micron .
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.999%.
4.Service life is approximately 3000h-6000h.
5.Initial pressure differential less than 0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lyd
Product Advantage
1. High-performance filtration
Adopting advanced filter media, it can effectively remove impurities and moisture in the oil to ensure the purity of the compressed oil.
2. Strong durability
The materials have been strictly screened and have good pressure resistance and high temperature resistance, suitable for a variety of working environments.
3. Environmental protection and energy saving
By reducing oil contamination and improving system efficiency, Atlas Copco Screw Air Compressor Oil Filter 1621875000 helps to reduce overall energy consumption and maintenance costs.

Technical Parameters
|
Part number |
1621875000 |
|
Product name |
Oil Filter |
|
Filter Type |
Oil Filter |
|
Material |
Glassfiber |
|
Filtration accuracy |
0.1 micron |
|
Filtration efficiency |
99% |
|
Apply for |
Atlas Copco Air Compressor |
|
MOQ |
1 pcs |
|
Place of origin |
Shaanxi, China |
|
Warranty |
1 Year |

Product Application
1. Food processing
Provide oil-free pure air for fermentation, packaging, filling, cleaning and other links.
2. Electronics industry
Provide high-quality oil-free gas source for electronic product production to ensure processing accuracy.
3. Petrochemical industry
Used for compressed air driven equipment such as transportation, separation, heating, etc.

Product Operate Guide
1. Installation steps
Make sure the compressor is turned off and powered off;
Open the compressor housing and find the oil filter installation location;
Install the new Atlas Copco Screw Air Compressor Oil Filter to the specified position, paying attention to the direction;
Tighten the filter element gently by hand to ensure sealing.
2. Replacement cycle
It is recommended to replace the oil filter 1621875000 every 5000 hours of operation;
Depending on the actual use environment and oil quality, the replacement cycle can be appropriately extended or shortened.
3. Maintenance recommendations
Check the filter element status regularly. If it is found to be blocked or damaged, it should be replaced in time;
Keep the filter element clean to prevent impurities from entering the system.
Contact Shaanxi Jiarongze Energy Equipment Co.,Ltd at aircompressorsupply@aircompressorglobal.com to discuss variety of air compressors and spare parts.nce.

Hot Tags: oem atlas copco screw air compressor oil filter 1621875000, China oem atlas copco screw air compressor oil filter 1621875000 manufacturers, suppliers, 1622314200, Atlas Copco Oil Filter, 1621737800, 1092200289, Atlas Copco Screw Air Compressor Oil Filter, Atlas Copco Air Compressor Oil Filter
