1092300919 Oil‑Separator Element For Atlas Copco Screw Compressor

1092300919 Oil‑Separator Element For Atlas Copco Screw Compressor
Details:
Product name: Oil Separator
Part number:1092300919
Type: Oil Separator
Material:Imported fiberglass
Place of origin:Shaanxi, China
Warranty:1 Year
Send Inquiry
Description
Send Inquiry

 

Product Introduction

 

Part number 1092300919 is aftermarket replacement oil‑separator element, core consumable inside oil‑injected Atlas Copco rotary screw compressor oil‑air receiver tank.

 

Critical technical clarification: This element reduces residual oil‑mist content of compressed‑air for oil‑injected compressor. It CANNOT deliver ISO8573‑1 Class0 oil‑free compressed‑air. Medical‑grade or high‑purity process air requires separate downstream refrigerated dryer plus multi‑stage coalescing filter system.

 

Key mechanical points for field‑service:

The bottom scavenge‑tube (oil‑return tube) assembly, sealing gasket and static‑earth spring contact are critical during replacement. Blocked or mis‑positioned scavenge‑tube is the most‑common root‑cause for compressed‑air side oil‑carry‑over fault, even when brand‑new separator element is fitted. Earth spring must maintain reliable contact for static electricity dissipation, eliminating static‑ignition risk from oil‑mist flow.

 

►Important fit‑note: Even with identical part‑number 1092300919, minor hardware revision variants may exist. Part‑number alone cannot guarantee perfect fitment. Please submit full Atlas Copco compressor serial‑number and clear photo of old oil‑separator element name‑plate label for our pre‑order cross‑verification.

 

Common field‑failure reminder: Symptoms such as excessive residual oil‑content in outlet air / oil‑carry‑over do not automatically mean defective separator element. Execute inspection workflow: check scavenge‑tube & non‑return check‑valve for blockage, verify lubricant anti‑foam performance, confirm correct oil‑level inside receiver tank, before judging separator‑element failure.

 

Service‑life reminder: Reference service‑life 3500‑6000 running‑hours applies only for clean indoor well‑maintained site. Differential‑pressure reading shall be taken as primary replacement trigger, not fixed runtime hours. Replace immediately once differential‑pressure exceeds threshold.

 

Installation reminder: Always fit brand‑new sealing gasket during swap‑out. Never reuse old gasket. Confirm scavenge‑tube seating position and reliable earth‑spring contact after installation; missing gasket or poor scavenge‑tube alignment will directly cause oil‑carry‑over failure.

 

Critical buying alert: Only referencing part‑number "1092300919" creates fit‑risk. Submit compressor serial‑number plus old‑separator‑element label photo for compatibility validation and prevent costly on‑site downtime.

 

Filtration accuracy: 0.1μm

Filtration efficiency: ≥99.9%

Oil content: ≤3ppm

Service life: 3500h-6000h

Initial pressure difference: ≤0.02MPa

 

Customer Buying & Maintenance Priorities

 

Maintenance technicians sourcing Atlas Copco oil‑separator element focus on practical real‑site considerations beyond unit price:

1. Component‑function awareness: Reduces residual oil‑mist for oil‑injected compressor; cannot produce Class0 oil‑free air; high‑purity air needs downstream additional air‑treatment equipment.

2. Scavenge‑system risk awareness: Scavenge‑tube / check‑valve blockage is top oil‑carry‑over cause; must inspect scavenge assembly on every separator‑element replacement.

3. Fit‑validation risk: Same part‑number may carry minor hardware revision variants; compressor serial‑number plus old‑separator‑element label photo required for pre‑order validation.

4. Fault‑diagnosis workflow: Air‑side oil‑carry‑over fault, inspect scavenge‑tube, check‑valve, oil‑foaming and oil‑level status first; do not directly replace separator element.

5. Installation‑operation awareness: Use brand‑new sealing gasket; verify scavenge‑tube seating and static‑earth‑spring reliable contact.

6. Replacement‑criteria awareness: Differential‑pressure value is primary replacement trigger, not fixed running‑hour counter; shorten service interval under heavy‑dust / poor‑oil‑quality environment.

7. Warranty‑scope clarity: Limited‑warranty only covers manufacturing‑related material & structural defects. Premature failure caused by degraded lubricant, scavenge‑system blockage, improper installation, harsh‑site‑condition are excluded. On‑site service labor is not covered.

8. Project‑order support: For compressor service fleets; export‑grade shock‑proof packing available.

 

 

Compatibility & Pre‑Order Verification Checklist

 

 

Reference OEM Part‑No:1092300919

Product Type:Aftermarket Replacement Oil‑Separator Element (for oil‑injected screw compressor receiver tank)

Reference applicable compressor:Matching Atlas Copco oil‑injected rotary screw compressor series which originally uses PN 1092300919

 

Information we require before quotation:

1. Full Atlas Copco compressor serial‑number from machine name‑plate

2. Clear photo of old oil‑separator‑element label

3. Brief description of working‑site environment: normal‑indoor / heavy‑dust / 24‑h continuous‑run / oil‑carry‑over breakdown repair

4. Order‑type: Single maintenance spare‑part / bulk stock‑up for service fleet

 

Order‑decision reference

‑ Suitable: Your Atlas Copco oil‑injected screw compressor originally specifies spare‑part number 1092300919.

‑ Need further re‑evaluation: Machine has repeated history of scavenge‑tube blockage and oil‑foaming trouble.

 

Core Functional Benefits

 

1. Multi‑layer glass‑fiber coalescing media for oil‑mist separation

High‑efficiency multi‑layer fiberglass coalescing material captures fine oil‑mist aerosol inside oil‑air mixture, condense oil into droplets which flow down to tank bottom for scavenge‑tube return to compressor lubrication circuit, lowering residual oil‑content of outlet compressed‑air.

2. Integrated static‑earth contact structure

Built‑in earth spring for static electricity dissipation generated by high‑speed oil‑mist flow inside receiver tank, reducing static‑accumulation safety risk.

3. Matching dimensional profile & gasket mating surface

Aftermarket element copies original mounting dimension, top‑plate sealing‑face geometry. Matches original receiver‑tank installation space when correct hardware‑revision variant is selected.

4. Controlled low initial differential‑pressure

Optimized pleat layout keeps initial pressure‑drop low, avoiding unnecessary extra power consumption under normal working‑condition.

 

Good Customers Reviews

 

product-805-764                 product-670-647                  product-685-632

 

 

Technical Specification

 

Parameter Value
Reference Part Number 1092300919
Product Type Oil‑Separator Element (coalescing cartridge for oil‑injected screw compressor receiver tank)
Filter Media Multi‑layer imported glass‑fiber coalescing material
Typical residual oil‑content ≤3 ppm under rated design‑condition
Initial differential‑pressure ≤0.02 MPa
Reference service‑life 3500‑6000 running‑hours (clean‑indoor reference only; differential‑pressure is primary replacement trigger)
Important Remark For oil‑injected compressor only, NOT Class0 oil‑free air solution; inspect scavenge‑tube & earth‑spring on replacement; install new gasket, never reuse old gasket; hardware revision variants exist
MOQ 1 Unit
Shipment Option Sea‑freight with shock‑proof export packing, air‑freight
Payment Terms T/T, PayPal, Western Union
Important Warranty Note Premature failure from bad oil, scavenge‑blockage, wrong‑installation excluded from warranty; on‑site labor not covered

 

Supply Certainty

 

Lead time & MOQ:

•MOQ: 1 piece (sample/urgent replacement orders accepted)

•Regular stock items: dispatch within 3–5 working days

•Custom or non-stock configurations: confirmed at inquiry with a written date, not an estimate

 

Risk Of Mis‑Application & Wrong‑Selection

 

Ordering oil‑separator element purely based on part‑number 1092300919 creates serious hidden operational risk:

1. Mis‑understand product capability: Expect this separator element to produce ISO8573‑1 Class0 oil‑‑free compressed‑air for medical / food direct‑contact process; downstream dryer‑coalescing‑filter package is additionally required.

2. Ignore hardware‑revision difference: Only rely on part‑number without compressor serial‑number & old‑element photo cross‑check, risk of fit‑mismatch.

3. Skip scavenge‑tube / gasket / earth‑spring check: Fit new element directly, reuse aged gasket, ignore mis‑positioned / blocked scavenge‑tube; brand‑new separator still suffers oil‑carry‑over fault.

4. Only follow running‑hour counter: Replace strictly by 3500‑6000 hours without monitoring differential‑pressure; element fully clogged leading to rising pressure‑drop and extra power consumption.

5. Mis‑judge separator‑element failure: When oil‑carry‑over appears, replace separator directly without inspecting scavenge‑system, oil‑foaming and oil‑level; root‑cause trouble remains unresolved, new element will fail prematurely.

 

Cost insight: Oil‑separator element is mission‑critical consumable for oil‑injected screw compressor. Correct fit‑validation, scavenge‑tube inspection, gasket renewal and differential‑pressure monitoring are equally important as element hardware quality. Many oil‑carry‑over failures originate from scavenge‑circuit issues instead of separator‑element itself.

 

Typical Application Scenarios

 

This 1092300919 aftermarket oil‑separator element is for routine maintenance & breakdown‑repair of matched Atlas Copco oil‑injected rotary screw compressors:

‑ Factory‑site compressor periodic maintenance

‑ Compressor service & rental‑fleet spare‑parts stocking

‑ General‑industry compressed‑air‑station overhaul

 

Reminder: This separator only reduces residual oil‑mist for oil‑injected compressor unit. It cannot achieve medical‑grade / ISO8573‑1 Class0 oil‑free air without complete downstream air‑treatment system.

 

Critical On‑Site Installation & Replacement Guidance

 

Safety Warning: Perform full LOTO lock‑out‑tag‑out procedure. Shut‑down compressor, fully depressurize oil‑air receiver tank and wait for adequate cooling before opening tank cover; avoid hot‑oil scald‑injury.

1. Pre‑replacement preparation

Full shut‑down, depressurization and cooling of compressor. Prepare brand‑new sealing gasket (DO NOT reuse old gasket). Visually inspect existing scavenge‑tube, check‑valve for sludge / blockage; check earth‑spring condition. Take photos for original assembly position for reassembly reference.

 

2. Remove old oil‑separator element

Open receiver tank cover, take out old separator cartridge. Further inspect old element for signs of early saturation, sludge accumulation, to judge root‑cause of past fault. Clean tank‑seat surface.

 

3. Mount new 1092300919 oil‑separator element

Place brand‑new sealing gasket correctly. Install new separator‑element into tank seat. Verify scavenge‑tube inserts properly into element bottom port; confirm static‑earth‑spring maintains reliable contact with separator metal top plate. Improper scavenge‑tube seating is frequent source of post‑swap oil‑carry‑over.

 

4. Post‑assembly commissioning & baseline recording

Re‑assemble tank cover, tighten bolts following torque‑sequence. Restore compressor to service. Record initial differential‑pressure reading after stable full‑load operation.

 

5. Functional verification

Run compressor under normal working‑condition. Monitor differential‑pressure trend; observe whether oil‑carry‑over symptom disappears. Keep tracking differential‑pressure in subsequent daily maintenance.

 

6. Troubleshooting hint after replacement

If compressor still shows air‑side oil‑carry‑over fault after fitting brand‑new separator element:

Do NOT judge new separator defective directly. Re‑inspect scavenge‑tube / check‑valve blockage status, gasket installation, earth‑spring contact, lubricant foaming‑property and receiver‑tank oil‑level. Most oil‑carry‑over faults root in scavenge‑circuit and system‑condition instead of separator‑element hardware.

 

Spare‑Part Planning Guidance

 

For factory‑maintenance‑teams and compressor‑service‑contractors:

 

1. Single emergency spare‑part: Express shipment for on‑site breakdown overhaul repair.

2. Service‑fleet bulk‑stock‑up: Shock‑proof export‑grade packing.

 

Inventory suggestion: Keep this oil‑separator element as critical spare‑part for 24‑h continuous‑running matched Atlas Copco oil‑injected screw compressors; prioritize differential‑pressure monitoring rather than only following runtime‑hour counter.

 

Frequently Asked Questions

 

Q1: Can 1092300919 separator‑element produce ISO8573‑1 Class0 medical‑grade oil‑free air?

A: No. It only reduces residual oil‑mist of oil‑injected screw compressor. To achieve medical‑grade / Class0 air, complete downstream dryer plus multi‑stage coalescing‑filter set must be equipped additionally.

Q2: After installing new separator‑element, compressor still has oil‑carry‑over, is new element defective?

A: Not necessarily. The most‑common cause is blocked / mis‑positioned scavenge‑tube, worn gasket, earth‑spring poor‑contact, lubricant foaming or incorrect tank oil‑level. Inspect scavenge‑circuit first before judging element failure.

Q3: Shall I replace separator strictly according to 3500‑6000 running‑hours?

A: 3500‑6000 hours is reference value for clean‑indoor well‑maintained workshop. Differential‑pressure value is primary replacement trigger. Shorten maintenance cycle under heavy‑dust / poor‑oil‑quality working‑site.

Q4: Can I reuse old sealing gasket when changing oil‑separator element?

A: Not recommended. Always install brand‑new gasket. Re‑using aged gasket easily causes leakage and oil‑carry‑over fault.

Q5: Why we need to check scavenge‑tube during separator‑element replacement?

A: Scavenge‑tube is responsible for sucking condensed oil back into lubrication circuit. Blockage or mis‑alignment will stop oil‑return and trigger oil‑carry‑over to compressed‑air outlet, even with brand‑new separator element.

Q6: Which Atlas Copco machines does 1092300919 fit?

A: Reference fit for Atlas Copco oil‑injected rotary screw compressors originally specifying PN 1092300919. Please provide compressor serial‑number plus old‑element photo for cross‑verification because hardware revision variants exist.

Q7: What damage situation will be excluded under limited‑product warranty?

A: Limited‑product‑warranty only covers manufacturing‑related material and structural defects. Premature failure caused by degraded lubricant, scavenge‑system blockage, improper installation, harsh‑site‑conditions are excluded. On‑site labor cost is not covered.

 

Request Technical Quotation for 1092300919 Oil‑Separator Element

Fill inquiry‑form with compressor serial‑number, old‑element photo‑reference, site‑environment note, quantity and destination‑country. Our sales‑engineer will reply quotation and lead‑time promptly.

 

Hot Tags: 1092300919 Oil‑Separator Element For Atlas Copco Screw Compressor, China 1092300919 Oil‑Separator Element For Atlas Copco Screw Compressor manufacturers, suppliers, 1613692100, 1625775300, Replacement Atlas Copco Air Compressor Spare Parts Oil Separator, 1619756000, 1092300919, 1092081600

Send Inquiry