Product Introduction
Oil Separator Element for Atlas Copco Screw Air Compressor1092081600 is a high-efficiency oil-gas separation device designed specifically for screw air compressors. The filter element is mainly used to filter oil mist and moisture in compressed air to ensure dry and clean compressed air, thereby extending the service life of the equipment and improving operating efficiency.
Filtration accuracy: 0.1μm
Filtration efficiency: ≥99.9%
Service life: 3500-6000 hours
Oil mist particle size: ≤0.1μm
Initial pressure difference: ≤0.02MPa

Product Advantage
1. High-efficiency filtration
It uses imported glass fiber media, the filtration efficiency exceeds 99.9%, which can effectively remove oil mist and impurities in compressed air and ensure the cleanliness of the output air.
2. Long service life
The designed service life can reach 3500-6000 hours, reducing the replacement frequency and maintenance costs.
3. Low pressure drop
During operation, the pressure drop is extremely low, it can ensure the maximum energy consumption and efficiency of the compressor.

Technical Parameters
|
Part number |
1092081600 |
|
Product name |
Oil Separator |
|
Material |
Imported glass fiber |
|
Filtration accuracy |
0.1μm |
|
Filtration efficiency |
≥99.9% |
|
Apply for |
Atlas Copco Air Compressor |
|
MOQ |
1 pcs |
|
Place of origin |
Shaanxi, China |
|
Warranty |
1 Year |

Product Application
1. Food processing
During food processing, the cleanliness of compressed air directly affects food safety. Oil Separator Element for Atlas Copco Screw Air Compressor1092081600 can effectively remove oil mist and prevent pollution.
2. Mining and Rock Excavation
In mining and rock crushing equipment, oil separator provide a clean air source for the compressed air system.
3. Energy and Power Generation
It provides high-quality compressed air for key components in wind power generation, solar power generation and other equipment.

Product Operate Guide
1. Preparation before installation:
Make sure the compressor is turned off and disconnect the power supply.
Check whether the Oil Separator Element for Atlas Copco Screw Air Compressor1092081600 interface matches the compressor to ensure correctness.
Clean the filter element installation area to avoid dust and impurities.
2. Installation steps:
Put the Oil Separator in the designated position of the compressor to ensure good sealing.
Use a wrench or special tool to fix the filter element to ensure a firm installation.
Reconnect the power supply, start the compressor, and check for leaks or abnormal sounds.
3. Maintenance and replacement:
Regularly check the working status of the filter element to observe whether there is blockage or wear.
When the filter element pressure difference exceeds 0.02MPa, it should be replaced immediately.
When replacing the the oil separator element , it is recommended to use original accessories to ensure performance and safety.
After replacement, restart the compressor and check whether the operating status is normal.
Hot Tags: oil separator element for atlas copco screw air compressor1092081600, China oil separator element for atlas copco screw air compressor1092081600 manufacturers, suppliers, Atlas Copco Compressors Replacement Oil Separator, 1092081600, Atlas Copco Oil Separator Replacement, Oil Separator Element for Atlas Copco Screw Air Compressor, 1619756000, 1612386900
