Product Overview
This unloader‑valve service overhaul repair kit is designed for matched Atlas Copco oil‑injected rotary screw compressors (GA series and related variants).
Critical upfront clarification:This service‑kit contains O‑rings, shaft seals, diaphragm, return springs and auxiliary sealing components. THE KIT DOES NOT INCLUDE THE MAIN UNLOADER‑VALVE HOUSING / BODY. You reuse your existing original valve housing during overhaul work.
Common field symptoms related to unloader‑valve degradation:
‑ Compressor unstable system pressure, frequent load‑unload rapid cycling
‑ Compressor fails to load or cannot unload at set pressure
‑ Continuous blow‑down air leakage from unloader / vent port after shutdown
‑ Slow pressure build‑up during startup
Important troubleshooting reminder: Above‑mentioned symptoms do not automatically mean internal seal failure inside unloader valve. Before disassembling valve for overhaul, technicians need to inspect controller pressure set‑points, pilot solenoid valve performance, and blockages inside pilot air tubing. Many load‑unload malfunctions are caused by upstream pneumatic / electrical components instead of valve internal seals.
Another key field trap: If original valve housing has inner‑wall scratch, corrosion or crack, installing brand‑new service‑kit cannot fix leakage issue. Under this condition you have to replace complete full unloader‑valve assembly, overhaul kit will not resolve housing mechanical damage.
Critical buying alert: Service‑kit part‑number alone cannot guarantee perfect fitment. Different Atlas Copco GA‑series hardware revisions adopt different spring pre‑load and seal dimension. Always submit full compressor serial‑number plus photo of old service‑kit / unloader‑valve name‑plate for our technical cross‑verification before placing your order.

Customer Buying & Maintenance Priorities
Industrial maintenance buyers evaluate unloader‑valve overhaul kit with multi‑dimensional practical concerns, not only unit price. Below points are fully addressed in this page:
1. Clear scope of supply: Distinguish service‑kit (seal/spring/diaphragm only, reuse housing) VS complete full unloader‑valve assembly; help make correct budget decision.
2. Fault‑diagnosis workflow: Avoid blind valve disassembly; check pilot circuit and controller setting before ordering overhaul kit.
3. Assembly rule: Must replace ALL kit components together; partial component replacement is forbidden.
4. Hardware limit awareness: Service‑kit cannot rescue scratched / cracked valve housing; know when you have to order full valve assembly.
5. Assembly material requirement: Correct compressor‑compatible grease / lubricant; wrong grease will rapidly degrade elastomer seals.
6. Warranty scope clarity: Only covers kit component manufacturing defects; exclude housing wear, wrong grease, assembly human error; onsite labor and return‑shipment freight are not included.
7. Bulk stocking solution: For compressor service contractors, kit + full‑valve combined stocking strategy.
8. Technical backup: Overhaul, cleaning and commissioning checklist for onsite maintenance technicians.
Compatibility & Pre‑Order Verification Checklist
Product Type:Unloader‑Valve Service Overhaul Repair Kit
Kit Contents:O‑rings, shaft seals, diaphragm, return springs, auxiliary sealing parts (Valve housing body NOT included)
Applicable Equipment:Matched Atlas Copco oil‑injected rotary screw compressor GA‑series
Information we require before quotation:
1. Full compressor serial‑number from machine name‑plate
2. Clear photo of old unloader‑valve or original old service‑kit marking
3. Fault symptom description: unstable pressure / fail‑to‑load / blow‑down leakage etc.
4. On‑site status: inspect whether inner valve housing has scratch, corrosion or crack
5. Requirement: single emergency spare / bulk stock for service fleet
Decision reference: Service‑kit VS Full Complete Unloader‑Valve Assembly
‑ ✅ Choose service overhaul kit: Valve housing body intact, no scratch / crack / heavy corrosion; only internal seals, diaphragm or springs fatigued.
‑ ✅ Choose full complete unloader‑valve assembly: Valve housing inner‑wall scratched, corroded, cracked; serious mechanical wear inside body.
Core Functional Benefits
1. Cost‑effective overhaul solution for intact valve housing
If your original unloader‑valve housing remains in good mechanical condition, this overhaul kit avoids high‑cost full‑valve replacement. Renew all wearing internal consumable parts to restore original load‑unload control performance.
2. Complete matched set of wearing components
All elastomer seals, diaphragm and return springs are supplied as one set. Avoid the trouble of sourcing scattered individual spare‑parts; reduce ordering and inventory workload for maintenance team.
3. Restore stable load‑unload pressure regulation
After correct overhaul, unloader‑valve can follow controller pressure set‑point accurately. Eliminate frequent rapid cycling, abnormal blow‑down leakage, slow pressure build‑up, stabilize compressed‑air supply for production equipment.
4. Eliminate secondary damage risk caused by worn internal parts
Degraded diaphragm, hardened seals and fatigue springs lead to unstable valve action, which further disturbs pilot circuit and solenoid working condition. Timely overhaul protects upstream pneumatic control components.
5. Reduce overall maintenance expense for aging Atlas Copco screw unit
Qualified overhaul extends service‑life of original valve housing. It is an economical planned‑maintenance option for non‑critical production assets, compare with direct full‑valve swap‑out.
Technical Specification
| Parameter | Value |
|---|---|
| Product | Unloader‑Valve Service Overhaul Repair Kit |
| Kit Included Parts | O‑rings, shaft seals, diaphragm, return springs, auxiliary sealing components |
| Excluded | Unloader‑valve main housing / valve body |
| Working Medium | Compressor pilot control air, trace compressor oil mist |
| Working pressure range | Matched with GA‑series compressor nominal working pressure |
| Working ambient temperature | ‑10℃ ~ +75℃ |
| Application | Overhaul for matched Atlas Copco oil‑injected rotary screw compressor unloader valve |
| MOQ | 1 Piece |
| Shipment Option | DHL/FedEx/UPS express, air freight, sea freight |
| Payment Terms | T/T, PayPal, Western Union |
| Important Remark | Replace ALL kit components together; kit ineffective for scratched / cracked valve housing; use compressor‑compatible assembly grease |
Risk Of Mis‑application & Low‑Grade Aftermarket Service Kit
1. Misjudge hardware condition, use kit for damaged housing
If valve housing inner wall has scratch, corrosion or crack, even brand‑new overhaul kit still suffers internal leakage. You waste labor and spare‑part cost, fault remains.
2. Only replace partial components from kit
Many technicians only swap failed‑looking seal and reuse old spring / diaphragm. Old remaining parts already experience fatigue aging. Short‑term re‑failure will happen quickly. Every part inside kit shall be renewed 100% together.
3. Use incorrect general‑purpose grease
Ordinary multi‑purpose grease will chemically attack nitrile / fluorine elastomer seals inside kit. Seals swell or harden within hundreds running hours, causing new leakage fault. Must adopt compressor‑system compatible assembly grease.
4. Low‑quality aftermarket kit elastomer components
Cheap inferior seals / diaphragm have poor oil‑mist and temperature‑resistance. Service‑life is far shorter than industrial‑grade kit; repeated overhaul increases downtime loss.
Cost insight: Overhaul‑kit saves upfront cost only under precondition that valve housing is mechanically sound. Mis‑application leads to repeated shutdown and production loss. Always inspect housing condition before ordering service kit.
Good Customers Reviews

Typical Application Scenarios
This unloader‑valve service overhaul kit serves industrial facilities running matched Atlas Copco GA‑series oil‑injected rotary screw compressors: ‑ General manufacturing & metal‑working workshops '
‑ Automotive assembly & painting facilities
‑ Plastic‑processing production‑lines
‑ 24‑hour continuous‑run light‑industry compressed‑air stations
‑ Compressor service & rental companies for maintenance spare‑parts stocking
Evaluate unloader‑valve overhaul project when you observe: unstable system pressure, frequent load‑unload cycling, fail‑to‑load / unload, continuous blow‑down leakage, and valve housing has no obvious scratch or crack. Always finish upstream pilot‑circuit troubleshooting before valve disassembly.
Critical On‑Site Overhaul & Post‑Replacement Guidance
Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Cut main power supply; fully release pilot‑circuit residual pressure and wait cooling before valve disassembly. Residual pressure may cause component pop‑out injury.
1. Pre‑disassembly inspection & preparation
Power‑off and fully depressurize compressor pilot circuit. Disconnect pilot tubing, remove unloader‑valve assembly. Fully take‑apart valve housing.
Critical inspection step: Carefully check inner housing wall for scratch, corrosion or crack. If housing mechanical damage exists, stop overhaul; select full complete unloader‑valve assembly instead. Completely clean carbon‑sludge, oil sediment inside valve housing cavity. Remove all residual old seal fragments.
2. Kit component installation rule
Take every part from new service‑kit. Replace ALL components 100%; do NOT reuse any old spring, diaphragm, O‑ring seal. Apply compressor‑compatible assembly grease on elastomer surfaces (avoid excessive grease amount). Follow original valve assembly sequence.
3. Re‑assembly of valve housing
Re‑assemble valve housing according to service manual torque specification. Do not over‑torque to prevent housing thread damage. Re‑connect pilot control tubing.
4. Post‑start‑up commissioning & function test
Restore power supply. Run compressor and complete full pressure‑cycle test:
‑ Verify compressor load action at cut‑in pressure;
‑ Verify unload action and blow‑down vent performance at cut‑out pressure;
‑ Check for internal leakage symptom: abnormal frequent cycling, continuous blow‑down exhaust leakage;
‑ Record pressure‑cycle baseline for future maintenance reference.
5. Troubleshooting hint after overhaul
If load‑unload fault still occurs after kit overhaul: Do NOT judge service‑kit defective directly. Re‑check: pilot solenoid function, pilot tubing blockage, controller pressure set‑point, and re‑confirm whether valve‑housing inner wall has overlooked scratch or corrosion damage.
Spare‑Part Planning & Bulk‑Procurement Guidance
For factory‑maintenance‑teams and compressor‑service‑contractors:
1. Emergency single‑order: Fast express shipment for sudden unloader‑valve related breakdown.
2. Combined stocking strategy: Stock both service overhaul kit AND corresponding full complete unloader‑valve assembly. Handle two different hardware‑condition scenarios and optimize maintenance budget.
3. Quarterly / annual bulk‑procurement: Planned maintenance project, better unit‑price and stable lead‑time.
4. Pre‑shipment inspection: Check kit component completeness, elastomer and spring condition; bulk‑order inspection photos available upon request.
Inventory suggestion: Keep spare kit in stock for critical GA‑series compressors. Unloader‑valve internal wearing parts are common source of unplanned pressure‑cycling failure.
Frequently Asked Questions
Q1: Compressor has unstable pressure / blow‑down leakage, can I directly order this service kit for repair?
A: Not recommended to order kit blindly. First troubleshoot controller setting, pilot solenoid valve and pilot tubing blockage. Also inspect unloader‑valve housing inner‑wall for scratch / crack. If housing is mechanically damaged, service‑kit cannot solve fault; full‑valve replacement is required.
Q2: Can I only replace the leaking seal and reuse old spring / diaphragm from original valve?
A: Not allowed. All parts inside service‑kit shall be replaced as full set. Old springs and diaphragm already suffer fatigue aging even without visible damage. Partial‑part replacement will lead to short‑term re‑failure.
Q3: What is difference between service overhaul kit and full complete unloader‑valve assembly?
A: Service‑kit only supplies wearing internal consumables (seal, diaphragm, spring), you reuse existing valve housing body. Full complete assembly includes brand‑new valve housing plus all internal components. Choose kit only when housing is intact without scratch/corrosion/crack.
Q4: Will this service‑kit fit all Atlas Copco GA‑series unloader‑valve?
A: No. Different GA hardware revisions adopt different spring pre‑load and seal dimension. Submit full compressor serial‑number and old‑valve photo for compatibility cross‑verification before ordering.
Q5: After overhaul with new kit compressor still has leakage fault, what is possible root‑cause?
A: Common causes: overlooked scratch / corrosion on valve housing inner‑wall; wrong assembly grease; pilot circuit or solenoid failure; incorrect assembly torque. Not necessarily kit quality defect.
Q6: What damage condition is excluded from limited product warranty?
A: Limited warranty only covers manufacturing‑related defects of kit components. Excluded: housing mechanical damage, wrong assembly grease, on‑site assembly human error; onsite labor and return‑shipment freight are not included.
Request Technical Quotation for Unloader‑Valve Service Overhaul Repair Kit
Fill inquiry‑form with compressor serial‑number, fault description, quantity and destination‑country. Our sales‑engineer will reply quotation and lead‑time promptly.
Hot Tags: Unloader‑Valve Service Overhaul Kit | Atlas Copco Screw Compressor, China Unloader‑Valve Service Overhaul Kit | Atlas Copco Screw Compressor manufacturers, suppliers, Regulator Valve for Atlas Copco Air Compressor XA67WD, Unloader Valve Service Kit Spare Parts, 1626105281, 2605701580, 1089943921, 2901056300
