ZS1072124 Delcos Pro LRS Controller For CompAir L‑Series VSD Compressor

ZS1072124 Delcos Pro LRS Controller For CompAir L‑Series VSD Compressor
Details:
Product Name: Compair Electronic Delcos Pro LRS controller ZS1072124 
Brand:Compair
Model:ZS1072124 
Place of origin:Shaanxi, China
Warranty:1 Year
Payment terms: T/T, Paypal, Western Union, Visa
Minimum order quantity: 1pcs
Application: Air compressor system
Delivery method: DHL/FEDEX/UPS/EXPRESS DELIVERY
OEM: Provide OEM service
Customization service: Customized logo/graphic customization
Logistics attribute: General goods
Sample service: Support sample service
Sales scope: Global buyers
Send Inquiry
Description
Send Inquiry

Product Overview

 

Part number ZS1072124 is aftermarket replacement Delcos Pro LRS controller, dedicated for CompAir L‑Series LRS variable‑speed (VSD / RS) lubricated rotary screw compressors (L07‑L22 RS).

 

Critical technical clarification: This is aftermarket replacement unit, NOT genuine OEM original CompAir component. This controller IS NOT true plug‑and‑play. After mechanical installation, password‑protected compressor‑specific parameter and VSD variable‑speed range configuration is mandatory. Site technician shall have access to Delcos Pro LRS service‑level password for completing machine setup, including VSD inverter matching parameters.

 

This unit acts as central control brain for variable‑speed screw compressor; monitors discharge pressure, oil‑air temperature, runtime / load hours, manages load‑unload cycles, VSD speed regulation logic, safety interlock shutdown and built‑in fault diagnostic history log, supports Modbus RTU RS485 communication for remote monitoring.

 

Important fit‑note: Even with identical part‑number ZS1072124, different software‑edition firmware variants exist. Part‑number alone cannot guarantee perfect fitment. Please submit full CompAir compressor serial‑number and clear photo of old controller back‑side label showing part‑no plus software‑edition for our pre‑order cross‑verification.

 

ESD safety reminder: This is sensitive electronic PCB assembly. Electro‑Static‑Discharge (ESD) may cause invisible permanent circuit damage during handling. Anti‑static wrist strap and anti‑static working environment are required during installation and service. ESD‑induced damage is excluded under limited‑warranty.

 

Common field‑failure reminder: If compressor still triggers fault alarm codes or presents abnormal VSD speed fluctuation after installing brand‑new ZS1072124 controller, do not directly judge new controller defective. Perform inspection workflow: check sensor signal, transducer wiring, current transformer, 24 VDC cabinet power‑supply and VSD inverter peripheral hardware before concluding controller hardware failure.

 

Critical buying alert: Only referencing "ZS1072124" part‑number creates fit‑risk. Submit compressor serial‑number and old‑controller label photo for compatibility validation and avoid costly on‑site downtime.

 

Supply‑scope notice: We supply controller hardware unit only. Remote or on‑site commissioning / VSD & parameter programming service is NOT included in this offer. Customer shall arrange local qualified technician familiar with CompAir Delcos Pro LRS control platform for configuration work.

1753183853338

Customer Buying & Maintenance Priorities

 

Maintenance buyers sourcing ZS1072124 Delcos Pro LRS controller focus on practical real‑site considerations beyond unit price:

1. Component‑function awareness: Aftermarket replacement for Delcos Pro LRS VSD control platform; not genuine OEM; not plug‑and‑play, service‑password required for post‑installation including VSD speed‑range parameter setup.

2. Software‑edition & firmware‑revision risk awareness: Same ZS1072124 model may carry different software‑edition firmware variants; compressor serial‑number + old‑controller full label photo required for pre‑order validation.

3. ESD‑sensitive risk awareness: Static discharge will cause invisible permanent PCB damage; anti‑static measures are mandatory during handling.

4. Fault‑diagnosis workflow: Persistent faults or abnormal VSD speed fluctuation after controller swap‑out, inspect sensors, wiring, 24VDC power‑supply and VSD inverter peripheral components first, do not directly blame controller hardware.

5. Service‑scope awareness: Only controller hardware delivered; VSD programming / commissioning work needs local on‑site technician.

6. Warranty‑scope clarity: Limited‑warranty only covers manufacturing‑related hardware defects. Damage caused by ESD static, wrong wiring, over‑voltage surge, incorrect VSD & machine parameter configuration are excluded. On‑site service labor is not covered.

7. Project‑order support: For compressor service fleets; export‑grade shock‑proof packing; pre‑shipment power‑on test photos available upon request.

 

Compatibility & Pre‑Order Verification Checklist

 

Reference OEM Part‑No:ZS1072124

Product Type:Aftermarket Replacement Delcos Pro LRS Controller (LRS VSD control platform)

Reference applicable compressor series:CompAir L‑Series L07‑L22 RS / LRS variable‑speed lubricated rotary screw compressors

 

Information we require before quotation:

1. Full CompAir compressor serial‑number from machine name‑plate

2. Clear photo of old controller back‑side label (show part‑number, hardware revision & software‑edition firmware version)

3. Brief note of machine condition & fault symptom (if for breakdown repair: fault code / VSD abnormal speed etc.)

4. Working‑site environment: Control cabinet 24VDC power‑supply stability; surge risk

5. Order‑type: Single emergency spare‑part / bulk stock‑up for service fleet

 

Order‑decision reference

‑ Suitable: Your compressor is L07‑L22 RS L‑Series VSD unit originally equipped with Delcos Pro LRS ZS1072124 controller; local technician has Delcos Pro LRS & VSD inverter configuration capability.

‑ Need further re‑evaluation: Compressor belongs to fixed‑speed machine or other CompAir controller platforms; no local technician familiar with Delcos Pro LRS parameter & VSD programming.

 

Core Functional Benefits

 

1. Full Delcos Pro LRS VSD‑platform function matching

Replicates core control logic of original Delcos Pro LRS: variable‑speed inverter regulation control, load‑unload modulation control, multi‑level safety shutdown protection, real‑time fault diagnostic logging, maintenance hour counter, multi‑language menu support, real‑time clock and timer start‑stop scheduling. Realizes complete monitoring & VSD speed regulation for L07‑L22 RS series screw compressors.

2. Text‑based LCD user‑friendly HMI interface

Structured menu navigation for pressure setpoints, temperature thresholds, VSD speed‑limit parameters, maintenance timers, runtime statistics and system parameter groups. Password‑protected service menu for machine‑specific & VSD inverter configuration.

3. Industrial anti‑interference hardware design

Designed to adapt compressor cabinet environment with electric noise and temperature fluctuation, fits typical industrial compressor‑room operating‑conditions for VSD screw compressors.

4. Built‑in RS485 Modbus‑RTU communication port

Supports remote monitoring signal output, compatible with plant centralized supervision system; match original Delcos Pro LRS communication definition

5. Standard mounting footprint & connector layout

Matches original cabinet‑door mounting cut‑out and wiring connector definition for L07‑L22 RS units when correct software‑edition variant is selected.

 

Technical Specification

 

Parameter Value
Reference Part Number ZS1072124
Controller Platform Delcos Pro LRS (for L‑Series LRS VSD compressor)
Product Type Aftermarket replacement HMI & main PCB controller assembly
Input Supply 24 VDC (from cabinet internal power‑module, NOT direct 220V/380V main power)
Operating Temperature 0 ℃ ~ +60 ℃
Communication RS485 Modbus‑RTU
Display Multi‑line text LCD
Language Support Multi‑language menu
Important Remark Aftermarket replacement (non‑OEM original); NOT plug‑and‑play; service‑password required for compressor‑parameter & VSD‑speed configuration; ESD‑sensitive electronic component; software‑edition firmware variants exist
MOQ 1 Unit
Shipment Option Sea‑freight with shock‑proof export packing, air‑freight
Payment Terms T/T, PayPal, Western Union
Important Warranty Note ESD damage, wrong‑wiring, over‑voltage, incorrect VSD / machine‑parameter configuration excluded from product warranty; remote / on‑site commissioning service not included
 

Good Customers Reviews

 

product-805-764               product-670-647             product-685-632

 

Risk Of Mis‑Application & Wrong‑Selection

 

Ordering controller purely based on ZS1072124 part‑number creates serious hidden operational risk:

 

1. Mis‑understand as plug‑and‑play unit: Expect unit runs automatically after wiring without parameter & VSD‑speed setup; compressor cannot start or triggers continuous safety‑shutdown or abnormal VSD speed fluctuation.

2. Ignore software‑edition / firmware revision difference: Only rely on ZS1072124 part‑number without compressor serial‑number & old‑controller photo cross‑check, risk of VSD‑logic mismatch and function abnormality.

3. Neglect ESD protection: Static electricity during installation brings invisible permanent PCB damage; this kind of damage cannot be identified visually and is excluded from warranty.

4. No local Delcos‑Pro‑LRS‑qualified technician available: Hardware delivered, but no‑one can complete machine‑specific and VSD‑inverter parameter configuration, spare‑part cannot be put into service.

5. Misjudge new‑controller fault: After replacement compressor still reports faults or unstable VSD speed, skip peripheral‑check and directly return controller, wasting logistics & production downtime.

 

Cost insight: VSD compressor controller is high‑value sensitive spare‑part. Compatibility validation, anti‑static handling and post‑installation VSD‑related parameter configuration are equally important as controller hardware quality. Improper operation may lead to expensive compressor stand‑still loss.

 

Typical Application Scenarios

 

This ZS1072124 aftermarket Delcos Pro LRS controller is used for repair‑and‑replacement of matched CompAir L07‑L22 RS / LRS variable‑speed lubricated rotary screw compressors originally equipped with Delcos Pro LRS control system:

‑ Factory‑site VSD compressor breakdown emergency repair

‑ Compressor service & rental‑fleet spare‑parts stocking

‑ General‑industry compressed‑air‑station VSD‑unit maintenance

 

Reminder: This hardware does not include on‑site or remote VSD‑parameter programming / commissioning service. Not compatible with fixed‑speed Delcos Pro / Delcos XL / Delcos 3100 control platforms.

 

Critical On‑Site Installation & Replacement Guidance

 

Safety & ESD Warning:

1. Perform full LOTO lockout‑tagout procedure. Disconnect complete main power supply and confirm zero‑voltage before opening control cabinet.

2. This is ESD‑sensitive electronic assembly. Wear anti‑static wrist‑strap connected to reliable earth‑ground during whole handling procedure. Static discharge can destroy circuit board without visible traces.

 

1. Pre‑replacement preparation

If old controller is still functional, record all critical operating parameters: pressure setpoints, temperature thresholds, VSD min/max speed limits, maintenance timers. Take clear photos for every wiring connector, ribbon‑cable position for reassembly reference. Collect old‑controller label information including software‑edition for future traceability.

2. Remove existing controller unit

Carefully unplug ribbon cables and terminal connector blocks. Unscrew mounting fasteners, take out old controller assembly from cabinet door / back‑plate. Avoid pulling hard on wiring harness.

3. Mount new ZS1072124 Delcos Pro LRS controller

Fix new controller onto original mounting cut‑out position. Re‑install all ribbon cables and terminal connectors, ensure each connector is fully seated and locked. Complete reliable protective earth‑ground connection.

4. Power‑on & parameter & VSD‑configuration (mandatory step)

Restore compressor cabinet 24 VDC power‑supply. Controller will run self‑test after power‑on. Enter service‑level password‑protected menu, input compressor‑specific parameters: motor rating, pressure thresholds, temperature protection values, and most importantly VSD inverter minimum / maximum speed limits according to actual L‑Series VSD machine configuration.

 

Do NOT skip parameter & VSD‑configuration step. Unit will not operate correctly without correct machine‑specific setup.

 

5. Post‑commissioning functional verification

Run compressor and monitor full VSD variable‑speed & load‑unload cycle behaviour. Confirm displayed pressure / temperature readings match real instrument values, inspect active fault‑alarm list. Simulate normal start‑stop cycle to confirm VSD speed‑regulation and full control‑logic works as expected.

 

6. Troubleshooting hint after replacement

If compressor still reports fault codes or unstable VSD speed after installing new ZS1072124 controller: Do NOT judge new controller defective directly. Re‑inspect wiring connections, transducer / sensor health condition, current transformer, 24 VDC cabinet power‑supply and VSD‑inverter peripheral hardware. Many fault events root in peripheral components instead of controller hardware itself.

 

Spare‑Part Planning Guidance

 

For factory‑maintenance‑teams and compressor‑service‑contractors:

 

1. Single emergency spare‑part: Express shipment for on‑site breakdown overhaul repair.

2. Service‑fleet bulk‑stock‑up: Shock‑proof export‑grade packing; pre‑shipment power‑on test photos can be provided upon project‑order request.

 

Inventory suggestion: Keep this Delcos Pro LRS controller as critical spare‑part for 24‑h continuous‑running CompAir L07‑L22 RS VSD compressors, and ensure site has qualified technician familiar with Delcos Pro LRS for parameter & VSD‑inverter setting.

 

Frequently Asked Questions

 

Q1: Is ZS1072124 Delcos Pro LRS plug‑and‑play, can I run directly after wiring?

A: No. It is NOT plug‑and‑play. After physical installation you must enter service‑password menu and complete compressor‑specific parameters together with VSD inverter speed‑limit configuration for your L‑Series VSD unit. Local experienced Delcos Pro LRS technician is required.

Q2: Why do you need compressor serial‑number and old‑controller label photo for order confirmation?

A: Even same ZS1072124 part‑number has different software‑edition firmware variants. We perform cross‑check to avoid compatibility mismatch risk for VSD speed‑regulation logic.

Q3: My VSD compressor still has fault / abnormal speed fluctuation after changing new controller, is controller defective?

A: Not necessarily. Please check wiring harness, sensors, transducers, current transformers, 24VDC cabinet power‑supply and VSD‑inverter peripheral hardware first. A large share of faults are caused by peripheral components, not controller hardware.

Q4: Does product include remote or on‑site parameter / VSD‑inverter programming commissioning service?

A: No. Only controller hardware is supplied. Customer shall arrange local technician who is familiar with CompAir Delcos Pro LRS control platform for configuration work.

Q5: What damage situation will be excluded under limited‑product warranty?

A: Limited‑product‑warranty only covers manufacturing‑related material & structural defects. Damage caused by ESD static discharge, mis‑wiring, over‑voltage surge, incorrect compressor‑parameter and VSD‑configuration are excluded. On‑site labor cost is not covered.

Q6: Which CompAir machines does ZS1072124 Delcos Pro LRS fit?

A: Reference fit for CompAir L07‑L22 RS / LRS variable‑speed lubricated rotary screw compressors with original Delcos Pro LRS control‑system. Not compatible with fixed‑speed Delcos Pro, Delcos XL or Delcos 3100 platforms. Please provide compressor serial‑number plus old‑controller photo for cross‑verification because software‑edition firmware variants exist.

 

Request Technical Quotation for ZS1072124 Delcos Pro LRS Controller

Fill inquiry‑form with compressor serial‑number, old‑controller photo‑reference, fault‑description(if applicable), quantity and destination‑country. Our sales‑engineer will reply quotation and lead‑time promptly.

Hot Tags: ZS1072124 Delcos Pro LRS Controller For CompAir L‑Series VSD Compressor, China ZS1072124 Delcos Pro LRS Controller For CompAir L‑Series VSD Compressor manufacturers, suppliers, 100013548, 100005506, ZS1072124, Compair Electronic Delcos Pro LRS controller, Compair delcos xl controller, Compair elektronik controller

Send Inquiry