ZS1172911 Oil Separator Element | Compair L160‑L250 Screw Compressor

ZS1172911 Oil Separator Element | Compair L160‑L250 Screw Compressor
Details:
Product Name: Oil separator for CompairZS1172911
Brand:Compair
Model:ZS1172911
Place of origin:Shaanxi, China
Warranty:1 Year
Payment terms: T/T, Paypal, Western Union, Visa
Minimum order quantity: 1pcs
Application: Air compressor system
Delivery method: DHL/FEDEX/UPS/EXPRESS DELIVERY
OEM: Provide OEM service
Customization service: Customized logo/graphic customization
Logistics attribute: General goods
Sample service: Support sample service
Sales scope: Global buyers
Send Inquiry
Description
Send Inquiry

Product Overview

 

Part ZS1172911 is built‑in flange‑mount coalescing oil‑separator element, specially designed for Compair L160‑L250 series oil‑injected rotary screw compressors. It is installed inside air‑oil separation tank, capturing sub‑micron oil mist after primary centrifugal separation, lowering residual oil content of compressed‑air output and reducing frequent lubricant top‑up work.

 

★Important note: This is tank‑internal built‑in separator element, NOT inline pipeline post‑filter. It applies to screw compressor only, not for sliding‑vane compressor units.

 

One well‑known on‑site maintenance pitfall: installing brand‑new ZS1172911 separator but still suffering oil‑carry‑over. In most cases, the separator itself is not defective. The tiny internal siphon scavenge tube / orifice gets clogged by carbon sludge. Separated oil cannot flow back to oil sump and is re‑entrained into compressed‑air stream. This fault is easily ignored by field technicians.

 

Many maintenance teams only follow running‑hour counter for replacement. Reference service hours are only valid under clean indoor workshop environment. In dusty, high‑humidity production sites, filter media will be blinded far ahead of reference runtime. Separator differential‑pressure reading is the primary replacement trigger instead of runtime counter only. Delayed replacement leads to high oil consumption, oil‑stained finished goods and premature failure of downstream filter components.

 

Critical buying reminder: Part‑number ZS1172911 alone cannot guarantee compatibility. Different hardware revisions of Compair L‑series may require different separator part‑numbers. Please submit full compressor serial‑number for our cross‑verification before placing your order, avoid wrong‑part shipment and production downtime.

1753182532711

Compatibility & Pre‑Order Verification

 

Manufacturer Part Number:ZS1172911

Applicable Compressor:Compair L160‑L250 series oil‑injected rotary screw compressor (built‑in air‑oil tank configuration)

 

Information suggested before quotation:

1. Full compressor serial‑number

2. Confirm your compressor belongs to L160‑L250 series with internal flange‑mount separator tank

 

Service‑life Reference Guidance

‑ Clean indoor workshop: 3500‑4000 operating hours (reference value only)

‑ Dusty / high‑humidity workshop: shorten cycle to 2500‑3000 hours

‑ Mandatory replacement when separator differential‑pressure reaches OEM alarm threshold, regardless of accumulated running‑hours.

 

Core Functional Benefits

 

1. Control residual oil mist for downstream production quality

Multi‑layer fine glass‑fiber coalescing media traps sub‑micron oil aerosol. Properly‑working ZS1172911 keeps typical residual oil within 2‑4ppm under nominal full‑load condition, preventing oil‑fisheye defects for painting lines and protecting precision pneumatic equipment from oil contamination.

 

2. Reduce energy loss caused by rising differential pressure

Optimized pleated media maintains low initial pressure drop. As contaminants accumulate on filter media, differential‑pressure rises and compressor consumes extra power to maintain rated air flow. Timely separator replacement keeps energy consumption within factory baseline.

 

3. Reliable flange sealing to prevent invisible oil‑mist bypass

Matched heavy‑duty rubber flange gasket fits original tank sealing surface. Never reuse aged deformed old gasket. Even brand‑new separator will lose separation performance if old gasket creates micro bypass gap under machine vibration.

 

4. Resistance against carbon‑sludge contamination

Media and end‑cap structure withstand normal carbon‑oil sediment generated inside Compair L‑series separator tank.

 

5. Direct drop‑in replacement & system protection suggestion

Flange dimension and bolt‑hole layout match OEM housing requirement, no housing modification required. It is strongly recommended to replace compressor lubricant and oil filter synchronously with separator element, preventing brand‑new media from rapid blinding by degraded old oil sludge.

 

Technical Specification

 

Parameter Value
Part Number ZS1172911
Type Built‑in flange‑mount coalescing oil separator element
Filter Media Multi‑layer fine glass‑fiber composite coalescing material
Typical residual oil content 2‑4 ppm (nominal full‑load working condition)
Initial differential pressure ≤0.02 MPa
Operating temperature ‑10℃ ~ +85℃
Reference service life 3500‑4000 hrs (clean indoor reference only)
MOQ 1 Piece
Shipment Option DHL/FedEx/UPS express, air freight, sea freight
Payment Terms T/T, PayPal, Western Union, Visa
Important Remark Built‑in tank‑internal element; NOT inline pipeline filter

 

Typical Application Scenarios

 

This ZS1172911 oil‑separator serves industrial facilities running matched Compair L160‑L250 screw compressors:

‑ General manufacturing & metal‑working production workshops

‑ Automotive painting & assembly shops

‑ Plastic processing production lines

‑ Small‑batch food‑processing workshops

‑ 24‑hour continuous‑run light‑industry compressed‑air stations

 

Inspect or replace separator element when you observe high oil consumption, oily residue at compressed‑air outlet, or separator differential‑pressure approaching OEM alarm value. Always inspect siphon scavenge tube condition during every separator maintenance work.

 

Good Customers Review

 

product-805-764                product-670-647                product-685-632

 

On‑Site Installation & Post‑Replacement Guidance

 

Safety Warning: Perform full LOTO lock‑out‑tag‑out procedure. Shut down compressor completely, release ALL tank internal pressure and wait sufficient cooling before opening separator tank cover. Hot lubricant can cause severe burn injury.

 

1. Pre‑installation critical siphon‑tube inspection Depressurize and cool compressor. Remove separator tank cover, take out old separator element.

 

Most‑ignored maintenance step: Inspect and clean internal siphon scavenge tube / small orifice. Carbon‑sludge blockage will cause oil‑carry‑over even with brand‑new separator.

Clean tank interior carbon sludge and debris. Completely discard old rubber flange gasket; do not reuse it.

 

2. Element mounting and flange bolt tightening

Position brand‑new ZS1172911 separator element together with new gasket onto tank seat. Fit tank cover, tighten flange bolts gradually with diagonal‑cross tightening sequence, follow torque requirement from Compair official service manual. Uneven bolt torque creates micro‑gap and oil‑mist bypass leakage.

 

3. Post‑start‑up commissioning and observation

Re‑assemble all panels. Highly recommended to replace compressor oil and oil filter synchronously. Run compressor under full‑load for 30‑60 minutes.

‑ Record baseline separator differential‑pressure reading for future maintenance reference;

‑ Inspect flange joint for oil seepage;

‑ Monitor compressed‑air oil‑carry‑over performance.

 

4. Troubleshooting hint after replacement

If oil‑carry‑over fault remains after installing new separator, do not judge element defective directly. Re‑check siphon scavenge tube, compressor oil filling level, and minimum‑pressure‑valve working condition.

 

Frequently Asked Questions

 

Q1: I fitted brand‑new ZS1172911 separator, but Compair L‑series compressor still blows oil mist, what is top cause?

A: Very frequent root‑cause is blocked internal siphon scavenge tube / orifice. Separated oil cannot flow back to oil sump. Clean siphon passage before mounting new separator element.

 

Q2: Should I strictly replace separator exactly at 4000 running‑hours?

A: 3500‑4000 hours is reference for clean indoor environment. Dusty or humid workshop shortens real‑world service life. Separator differential‑pressure alarm threshold has higher priority than runtime counter.

 

Q3: Can I clean and reuse old ZS1172911 oil‑separator element?

A: Not recommended. Air‑blasting cleaning only removes surface dust, glass‑fiber coalescing layer generates invisible micro‑cracks, leading to hidden oil‑bypass risk. Full replacement is required.

 

Q4: Does ZS1172911 fit all Compair screw compressors?

A: It is dedicated for L160‑L250 series with built‑in flange‑mount separator‑tank. Different Compair series or hardware revisions may adopt different part‑numbers. Submit compressor serial‑number for compatibility cross‑check before ordering.

 

Q5: What risk will happen if I reuse old flange gasket?

A: Aged gasket will harden and deform under long‑time high‑temperature oil environment. Re‑use creates invisible bypass gap; oil mist will skip filter media directly, separator loses its separation function completely.

 

Why Source ZS1172911 Separator Element From Us

 

‑ Pre‑order compatibility check: Send compressor serial‑number, our technical team double‑verify fitment to avoid wrong‑part shipment.

‑ Pre‑shipment visual inspection: Check glass‑fiber media integrity, flange flatness and gasket condition before packing; inspection video available upon bulk‑order request.

‑ Flexible global logistics: Urgent express for emergency breakdown maintenance; sea‑freight solution for bulk‑project procurement.

‑ Technical support: If you meet oil‑carry‑over troubleshooting confusion, share compressor name‑plate information and we offer spare‑part reference suggestion.

 

Request Quote for ZS1172911 Separator Element

📞 Tel: +86-18992995984

📧 infor@aircompressorglobal.com

Hot Tags: ZS1172911 Oil Separator Element | Compair L160‑L250 Screw Compressor, China ZS1172911 Oil Separator Element | Compair L160‑L250 Screw Compressor manufacturers, suppliers, Oil separator for Compair, A10533574, 10533574, 10525274, ZS1172911, ZS1149216

Send Inquiry