Product Overview
Part 100001495 Delcos‑1000 is replacement operator controller panel for matched Gardner‑Denver oil‑injected rotary screw compressors. It acts as central HMI human‑machine interface, handling compressor status monitoring, safety interlock protection, running‑hour logging and service maintenance reminder functionsAlibaba.co....
Common field faults requiring controller swap‑out: LCD blackout / no backlight, unresponsive physical keys, parameters lost after power‑cycle, random false high‑temperature / motor‑overload alarm, cannot access service menu or reset maintenance timer.
Critical buying warning: Part‑number 100001495 alone cannot guarantee compatibility. Identical part‑number may carry different firmware release, IO terminal definition, and differ for fixed‑speed versus VSD variable‑speed compressor hardware. Always submit full compressor serial‑number plus photo of old‑controller name‑plate for our technical cross‑verification before placing your order.
★Very important note: This Delcos‑1000 unit is NOT plug‑and‑play. After physical mounting and wiring, machine‑specific operating parameters, pressure‑temperature alarm thresholds and service‑level password access are mandatory. Without correct parameter programming, compressor will trigger continuous alarm and refuse normal startup even if hardware dimension matches perfectly.
Language remark: Available menu languages depend on pre‑loaded firmware. Standard factory base firmware does NOT include Chinese language option. This panel adopts cabinet cut‑out embedded mounting; it is NOT wall‑mount hardware. Multi‑unit compressor coordinated control requires optional external communication module, not built‑in native function.

Compatibility & Pre‑Order Verification
Manufacturer Part Number:100001495 (Delcos‑1000)
Application:Replacement controller panel for matched Gardner‑Denver oil‑injected screw compressor
Information we require before quotation:
1. Full compressor serial‑number
2. Clear photo of original old‑controller name‑plate (firmware marking)
3. Confirm compressor configuration: fixed‑speed or VSD variable‑speed
Typical fault symptoms for controller replacement:
‑ Blank / dark LCD screen without back‑light
‑ Physical keys intermittent / no‑response
‑ Setting parameters cannot be saved after power‑off
‑ Random false alarm for over‑temp or motor overload
‑ Unable to enter service menu or reset maintenance hour counter
Core Functional Benefits
1. Restore full‑original machine monitoring & safety interlock protection
Matches Delcos‑1000 original control logic. Real‑time read‑out of discharge temperature, working pressure, total runtime, load‑idle status. Built‑in safety interlock triggers alarm or protective shutdown for over‑temperature, motor overload and sensor abnormality, protecting main air‑end and drive motor.
2. Service‑timer & maintenance reminder function
Supports maintenance interval counting, service alarm trigger, maintenance‑timer reset (requires service‑level password access). Recovers regular service prompt for production‑critical compressors.
3. Original‑equivalent IO terminal layout
Matching IO terminal pin‑out definition for compatible Gardner‑Denver screw units. Reduces re‑wiring workload during replacement. Hardware still requires full machine‑specific parameter setup after wiring completion.
4. Industrial‑grade hardware for compressor cabinet environment
Designed for inside compressor cabinet, resisting cabinet vibration, moderate temperature fluctuation and electrical interference inside industrial machine room.
5. Fault‑history diagnostic log storage
Saves historical fault event log for technicians to trace past abnormal events, assisting on‑site troubleshooting after controller replacement.
Technical Specification
| Parameter | Value |
|---|---|
| Part Number | 100001495 Delcos‑1000 |
| Installation Type | Cabinet cut‑out embedded mounting (NOT wall‑mount) |
| Operation | Physical push‑button keys + LCD display |
| Supported Language | Depends on pre‑loaded firmware; standard base firmware without Chinese |
| Communication | IO terminals; multi‑unit linkage requires optional external communication module |
| Power Supply | AC 220V ±10% cabinet power loop |
| Main Functions | Compressor monitoring, safety interlock, fault alarm, hour‑counter, service reminder |
| MOQ | 1 Piece |
| Shipment | DHL/FedEx/UPS express, air freight, sea freight |
| Payment Terms | T/T, PayPal, Western Union |
| Important Remark | NOT plug‑and‑play; machine‑specific parameter configuration & service password required post‑installation |
Typical Application Scenarios
This 100001495 Delcos‑1000 replacement panel is used for industrial sites operating matched Gardner‑Denver screw compressors:
‑ General manufacturing & metal‑working workshops
‑ Automotive assembly & painting facilities
‑ Plastic processing factories
‑ 24‑hour continuous‑run light‑industry compressed‑air stations
Evaluate controller replacement when you observe: screen blackout, key failure, parameter loss after power‑cycle, persistent false alarm, cannot reset service maintenance timer.
Good Customers Review

Critical On‑Site Installation & Commissioning Guidance
Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Completely cut cabinet main power supply before any wiring work. Wrong terminal connection can burn controller main‑board and peripheral pressure / temperature sensors.
1. Pre‑installation preparation
Power‑off cabinet and confirm zero‑voltage status. Take clear photos of old‑controller terminal wiring layout before disconnecting any cables. Preserve old‑controller name‑plate information for parameter reference.
2. Mounting & wiring work
Fit new 100001495 Delcos‑1000 panel into cabinet cut‑out. Re‑connect power loop, signal and sensor wires strictly follow recorded original wiring diagram. Wrong wiring will cause permanent hardware damage. Double‑check every terminal fastening.
3. Mandatory post‑installation parameter configuration (Most‑skipped step)
Hardware installation finished is NOT ready‑to‑run status. Enter service‑level password menu: configure working pressure set‑points, high‑temperature alarm threshold, motor‑protection parameters and maintenance service intervals according to actual compressor hardware. Missing configuration leads to continuous alarm and startup refusal.
4. Commissioning and function verification
Restore cabinet power supply. Verify LCD display, key response, sensor reading value, alarm logic and service‑timer function. Simulate normal compressor start‑stop cycle and confirm whole system behaves as expected. Save finished parameter settings.
5. Troubleshooting hint after replacement
If continuous alarm occurs after hardware swap‑out: Do NOT judge controller defective directly. Re‑check wiring correctness, sensor health condition and whether machine‑specific parameters are fully programmed.
Frequently Asked Questions
Q1: Can I just install 100001495 Delcos‑1000 and run compressor directly?
A: No, it is not plug‑and‑play. After mounting‑and‑wiring, service‑password access plus machine‑specific parameter programming for pressure, temperature and service intervals are mandatory. Without configuration, compressor alarms and refuses startup.
Q2: Can I confirm compatibility only by part‑number 100001495?
A: No. Same part‑number may contain different firmware and IO‑terminal revisions, also differs for fixed‑speed / VSD machines. Submit compressor serial‑number plus old‑controller name‑plate photo for cross‑verification to avoid wrong‑part shipment.
Q3: What common faults require Delcos‑1000 controller replacement?
A: Typical symptoms: black / no‑backlight LCD screen; keys no‑response; parameters lost after power‑cycle; persistent false over‑temp / overload alarm; cannot access service menu for timer reset.
Q4: Does 100001495 Delcos‑1000 support Chinese display language?
A: Menu languages depend on pre‑loaded firmware. Standard base firmware does NOT include Chinese language package. Multi‑unit coordinated compressor control needs extra optional communication module.
Q5: What risk comes with wrong wiring during controller swap‑out?
A: Incorrect terminal wiring can burn controller main‑board, pressure‑temperature sensors and peripheral electrical components. Always take wiring photos under full LOTO power‑off procedure before disassembly.
Why Source 100001495 Delcos‑1000 Controller Panel From Us
‑ Pre‑order compatibility evaluation: Submit compressor serial‑number and old‑controller name‑plate photo. Our technical team verify firmware & hardware matching before shipment to prevent mis‑fit.
‑ Pre‑shipment functional test: Power‑on inspection for LCD display, key‑response and basic IO‑circuit before packing for every unit.
‑ Anti‑static shock‑proof export‑grade packaging for sensitive electronic control parts for sea / air transit.
‑ Technical‑reference support: Installation‑commissioning checklist available for technician reference after placing order.
Request Technical Quotation for 100001495 Delcos‑1000 Controller Panel
📧 infor@aircompressorglobal.com
Hot Tags: 100001495 Delcos‑1000 Controller Panel | Gardner‑Denver Screw Compressor, China 100001495 Delcos‑1000 Controller Panel | Gardner‑Denver Screw Compressor manufacturers, suppliers, SC05-483, 100001495, Gardner Denver controller panel replacement, gd air compressor controller panel, Gardner Denver Air Smart Control, Gardner Denver Controller
