Ingersoll Rand 89292460 Shaft Sleeve | OEM Equivalent SSR/RS Series Compressor Part

Ingersoll Rand 89292460 Shaft Sleeve | OEM Equivalent SSR/RS Series Compressor Part
Details:
Product name: Shaft Sleeve
Part number:89292460
Type: Shaft Sleeve
Material: High strength alloy steel
Place of origin:Shaanxi, China
Warranty:1 Year
Send Inquiry
Description
Send Inquiry

 ✔️ OEM Exact Fit | ✔️ 42CrMo Forged Steel | ✔️ 1-Year Warranty | ✔️ 24h Shipping | ✔️ Free Technical Support

 

Product Introduction

 

Ingersoll Rand Shaft Sleeve 89292460 is an important part of the motor shaft system of Ingersoll Rand air compressor, and is mainly installed on the main shaft of the compressor. The bushing is made of high-quality materials, has excellent wear resistance, fatigue resistance and sealing performance, can effectively reduce mechanical wear, extend the service life of the equipment, and ensure the stability and efficiency of the air compressor operation.

                                                                                                                                        product-550-550

 

Unique Core Advantages of Our 89292460 Shaft Sleeve

 

1. Custom High-Strength Alloy Steel Raw Material

We reject ordinary carbon steel used by most domestic suppliers. The raw material for model 89292460 shaft sleeve is high-hardness alloy steel with standardized tempering heat treatment, maintaining structural integrity under continuous high-speed rotation and heavy instantaneous load, avoiding plastic deformation.

2. Micron-Level Precision Machining Tolerance

All sleeves are processed via CNC full-automatic lathe with ±0.005mm dimensional accuracy. Perfect interference fit with the compressor main shaft eliminates forced installation damage and reduces assembly gaps that cause oil seepage.

3. Special Anti-Wear Surface Hardening Treatment

The outer friction surface undergoes salt bath quenching polishing, boosting surface wear resistance by over 60% vs untreated generic sleeves, extending service cycle to 12–18 months under standard operating conditions.

4. Optimized Sealing Groove Anti-Leak Design

Internal oil storage groove structure optimized by our mechanical engineers locks lubricating grease evenly around the spindle, effectively blocking oil outflow and lowering weekly refueling frequency for maintenance teams.

5. IP65 Full Protection & Wide Working Adaptability

Reach IP65 dustproof and waterproof grade, stable performance in humid, dusty, high-temperature factory workshops without surface rust or material aging.

 

Technical Parameters

 

Item Detailed Spec
Part No. 89292460
Product Name Main Shaft Sleeve / Spindle Bushing
Raw Material High Strength Alloy Steel (Heat Treated)
Max Bearing Load 2500N
Rated Maximum Rotation Speed 3600rpm
Protection Class IP65 Dust & Water Resistant
Compatible Equipment Ingersoll Rand Screw Air Compressor Main Shaft System
Minimum Order Quantity 1 PC (Trial Order Supported)
Origin Shaanxi, China (Professional Compressor Parts Factory)
Warranty Period 1 Full Year Against Manufacturing Defects
 

 

 

Installation & Maintenance Guide

 

We provide free technical guidance for all customers to avoid installation errors:

1. Preparation: Drain all oil and air from the compressor air end, disassemble the air end to access the shaft sleeve

2. Remove old part: Use a shaft puller to remove the damaged sleeve, never hammer it to avoid damaging the rotor shaft

3. Clean: Wipe the rotor shaft surface with acetone, ensure no oil residue

4. Install new sleeve: Apply high-temperature resistant grease to the new sleeve, align the positioning mark on the sleeve with the rotor shaft, press evenly with a hydraulic press (pressure 15-20MPa)

5. Test: Reassemble the air end, run at low speed for 30 minutes, check for abnormal noise and oil leakage before normal operation

 

💡 Pro Tip: Replace the shaft seal and O-ring together during installation to reduce 30% secondary failure rate.

 

Frequently Asked Questions

 

Q1: Is the 89292460 sleeve fully interchangeable with genuine Ingersoll Rand original parts?
A1: Yes. Our CNC processing strictly copies original part drawing dimensions, mounting size and sealing groove structure, 100% direct replacement without modifying compressor spindle structure.

 

Q2: What's the difference between alloy steel sleeve and cheap carbon steel aftermarket bushings?
A2: Carbon steel sleeves lack heat treatment, easy to wear thin and leak oil within half a year; our alloy steel model undergoes quenching hardening, stable for over 12 months under standard use, reducing repeated replacement labor cost.

 

Q3: Can I order only 1 piece for my repair shop trial?
A3: Absolutely, MOQ is 1pc. We keep large stock of 89292460 shaft sleeves, support single unit sample shipment to global maintenance dealers.

 

Q4: What does your 1-year warranty cover?
A4: 1-year factory warranty covers all manufacturing defects including material cracks, dimensional errors and surface processing failures. Damage caused by improper installation or overload operation is excluded.

 

Q5: How long is the delivery time?
A5: All in-stock items ship within 24 hours after payment confirmation. DHL/FedEx delivery takes 3-5 working days to US/EU, sea shipping takes 15-30 days.
 

 

Factory After-Sales & Technical Support

 

 

As a professional manufacturer focused on Ingersoll Rand air compressor repair spare parts, we provide full lifecycle support for every order of 89292460 shaft sleeve:

7×24 online engineer technical consultation for installation, compatibility and failure troubleshooting;

Free equipment matching verification service with compressor serial number provided;

Complete 1-year factory warranty for all new sleeves shipped from our Shaanxi production base;

Custom bulk discount for long-term cooperation with global compressor maintenance companies and spare parts distributors;

Supporting matched accessories supply: IR oil seal, repair kit part 42486597, shaft sleeve 89245286 and other spindle wearing components one-stop procurement.

 

Get a Free Quote for Shaft Sleeve 89292460

 

Struggling with frequent spindle sleeve wear and costly original IR spare parts? Send us an inquiry today to get factory-direct pricing, free technical drawings and professional maintenance suggestions within 24 hours. Our engineering team will offer targeted replacement solutions for your Ingersoll Rand screw air compressor system.

 

📞 Tel: +86-18992995984

📧 infor@aircompressorglobal.com

Hot Tags: Ingersoll Rand 89292460 Shaft Sleeve | OEM Equivalent SSR/RS Series Compressor Part, China Ingersoll Rand 89292460 Shaft Sleeve | OEM Equivalent SSR/RS Series Compressor Part manufacturers, suppliers, Ingersoll Rand oil seal, 42486597, Ingersoll Rand Shaft Sleeve, Ingersoll Rand shaft Seal Kit Replacement, 89245286, 89292445

Send Inquiry