Product Overview
Part 7.7000.0 is original‑spec Sigma‑Control replacement operator panel for Kaeser SK‑SX series oil‑injected screw compressors. It serves as the central human‑machine interface, handling compressor running status monitoring, alarm reporting, protection interlock, operating‑hour counting and service reminder functions.
Common field failure symptoms requiring controller swap‑out: LCD screen blackout / no backlight, unresponsive physical keys, cannot store modified parameters, false high‑temperature / motor overload alarm, failure to reset service maintenance timer.
Critical buying warning: Part‑number 7.7000.0 alone is NOT sufficient to confirm compatibility. Identical part‑number may correspond to different firmware release, IO terminal definition and compressor hardware revision. Always submit full compressor serial‑number plus photo of old controller name‑plate for our technical cross‑verification before placing your order.
★Very important note: This controller is NOT plug‑and‑play. After physical installation, machine‑specific operating parameters, pressure‑temperature alarm thresholds and service‑level password access are mandatory. Without correct configuration, the compressor will generate continuous alarm and refuse normal startup, even if hardware fits perfectly.
This unit adopts physical push‑button operated LCD display. It is NOT touch‑screen hardware. Factory original Sigma‑Control 7.7000.0 does not contain Chinese language option.

Compatibility & Pre‑Order Verification
Manufacturer Part Number:7.7000.0
Application:Replacement Sigma‑Control panel for matched Kaeser SK‑SX series screw air compressor
Information we require before quotation:
1. Full compressor serial‑number
2. Clear photo of original old‑controller name‑plate (firmware version marking)
3. Confirm existing compressor hardware configuration (fixed‑speed / VSD, sensor layout)
Typical failure scenarios for controller replacement:
‑ Blank / dark LCD screen without display
‑ Physical keys no‑response or intermittent failure
‑ Parameter setting cannot be saved after power‑off
‑ Random false alarm of over‑temp / motor overload
‑ Unable to enter service menu or reset maintenance hour counter
Core Functional Benefits
1. Restore full original machine monitoring & interlock protection
Matches original Sigma‑Control logic. Real‑time read‑out of discharge temperature, working pressure, total running hours, load‑idle status. Built‑in safety interlock triggers alarm or protective shutdown for over‑temperature, motor overload and sensor abnormality, protecting main air‑end and drive motor.
2. Complete service‑reminder & maintenance‑timer function
Supports maintenance interval counting, service alarm trigger, and service‑timer reset (requires service‑level password access). Restores regular maintenance prompt function for production‑critical compressors.
3. Original‑equivalent IO terminal layout
Matching terminal pin‑out definition for compatible SK‑SX units. Reduces re‑wiring workload during replacement. Hardware still requires full parameter setup after wiring completion.
4. Stable industrial‑grade hardware for cabinet environment
Designed for compressor cabinet inner environment, resisting vibration, moderate temperature fluctuation and electrical interference inside industrial machine room.
5. Diagnostic alarm history record
Stores historical fault log for technicians to trace past compressor abnormal events, assisting on‑site troubleshooting after replacement.
Technical Specification
| Parameter | Value |
|---|---|
| Part Number | 7.7000.0 |
| Operation Type | Physical push‑button keys + LCD display (Non‑touch‑screen) |
| Supported Language | Factory original firmware: English / German / other European languages; No Chinese language package |
| Communication | Local IO terminals; optional external communication module support |
| Power Supply | AC 220V / 50Hz (compressor cabinet power loop) |
| Function | Compressor monitoring, safety interlock, fault alarm, hour counter, service reminder |
| MOQ | 1 Piece |
| Shipment | DHL/FedEx/UPS express, air freight, sea freight |
| Payment Terms | T/T, PayPal, Western Union |
| Important Remark | NOT plug‑and‑play; Machine‑specific parameter configuration required post‑installation |
★Remarks: Language options depend on pre‑loaded firmware version. Touch‑screen operation is not supported for this hardware revision.
Good Customers Review

Typical Application Scenarios
This 7.7000.0 Sigma‑Control replacement panel is used for industrial sites operating matched Kaeser SK‑SX series screw compressors:
‑ General manufacturing & metal‑working production workshops
‑ Automotive assembly & painting facilities
‑ Plastic processing factories
‑ 24‑hour continuous‑run light‑industry compressed‑air stations
Evaluate controller replacement when you observe: screen blackout, key failure, parameter loss, persistent false alarm, cannot reset service timer.
Critical On‑Site Installation & Commissioning Guidance
Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Completely cut main cabinet power supply before any wiring work. Wrong terminal connection can burn controller board and peripheral sensor components.
1. Pre‑installation preparation
Power‑off and confirm zero‑voltage inside control cabinet. Take clear photos of original old‑controller terminal wiring layout before disconnecting any cables. Keep old‑controller name‑plate information for parameter reference.
2. Wiring & hardware mounting
Mount new 7.7000.0 panel into cabinet cut‑out. Reconnect signal cables, power loop and sensor wires strictly following your recorded original wiring diagram. Wrong wiring will cause hardware damage. Double‑check all terminal fastening.
3. Mandatory post‑installation parameter configuration (Most‑skipped step)
Hardware installation finished does NOT mean ready‑to‑run. Enter service‑level password menu: configure working pressure set‑points, high‑temperature alarm threshold, motor protection parameters and maintenance service intervals according to actual compressor hardware specification. Without correct setup, compressor will alarm and refuse startup.
4. Commissioning and function verification
Power on compressor cabinet. Verify LCD display, key response, sensor reading value, alarm logic and service‑timer function. Simulate normal start‑stop cycle to confirm full system works as expected. Save finished parameter settings.
5. Troubleshooting hint after replacement
If continuous alarm occurs after hardware swap‑out: Do not judge controller defective directly. Re‑check wiring correctness, sensor health status and whether machine‑specific parameters have been fully programmed.
Frequently Asked Questions
Q1: Can I just plug in 7.7000.0 and run my Kaeser compressor directly?
A: No, it is not plug‑and‑play. After mounting and wiring, service‑password access and machine‑specific parameter programming (pressure, temperature alarm limits, service intervals) are mandatory. Missing configuration leads to alarm and startup failure.
Q2: Can I confirm compatibility only by part‑number 7.7000.0?
A: No. Same part‑number may carry different firmware and IO terminal revisions. Submit compressor serial‑number plus old‑controller name‑plate photo for cross‑verification to avoid wrong‑part delivery.
Q3: What common faults require replacing Sigma‑Control 7.7000.0 panel?
A: Typical symptoms: black / no‑backlight LCD screen; keys no‑response; cannot save parameters after power‑cycle; persistent false over‑temp / overload alarm; cannot access service menu or reset maintenance hour counter.
Q4: Does 7.7000.0 unit support Chinese display language?
A: Factory original hardware/firmware for 7.7000.0 Sigma‑Control does NOT include Chinese language package. Available languages depend on pre‑loaded firmware release.
Q5: What risk will bad wiring bring during controller replacement?
A: Incorrect terminal wiring can burn controller main‑board, pressure‑temperature sensors and peripheral electrical components. Always take wiring photos before disconnecting old unit under full power‑off LOTO safety procedure.
Why Source 7.7000.0 Sigma‑Control Panel From Us
‑ Pre‑order compatibility evaluation: Submit compressor serial‑number and old‑controller name‑plate photo. Our technical team verify firmware & hardware matching before shipment to prevent mis‑fit.
‑ Pre‑shipment function test: Power‑on functional inspection for LCD display, key response and basic IO circuit before packing for each unit.
‑ Export‑oriented anti‑static & shock‑proof packaging for electronic control components during sea / air transit.
‑ Technical reference support: Provide installation‑commissioning checklist for technician reference after order confirmation.
Request Technical Quotation for 7.7000.0 Sigma‑Control Panel
Fill inquiry form with compressor serial‑number, old‑controller name‑plate photo, quantity and destination country. Our sales‑engineer will reply quotation and lead‑time promptly.
Hot Tags: 7.7000.0 Sigma‑Control Panel | Kaeser SK‑SX Screw Compressor Controller, China 7.7000.0 Sigma‑Control Panel | Kaeser SK‑SX Screw Compressor Controller manufacturers, suppliers, air compressor controller panel, Kaeser Sigma Air Compressor Controller, Controller for Kaeser Air Compressor, 7 7602 1, Kaeser Sigma Controller, Kaeser Air Compressor Controller
