Tips: Due to the wide variety of air compressor valves, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
Product Description
Sullair Thermal Valve Kit 02250092-081 Element Replacement is a genuine OEM replacement element designed to restore and maintain the precise temperature regulation of your Sullair air compressor's lubrication system. This critical component acts as the brain of the oil temperature control circuit, ensuring your compressor operates within optimal thermal parameters. This repair kit provides you with the exact factory-specified parts needed to perform a complete rebuild or replacement of the valve's internal thermal element, guaranteeing compatibility and performance identical to the original equipment.


Product Advantage
1.Genuine OEM Quality & Fit:Manufactured to Sullair's original specifications, ensuring perfect dimensional fit, correct thermal calibration, and seamless integration with your compressor's oil circuit. Using genuine parts is key to maintaining the designed reliability and longevity of your equipment.
2.Optimized Compressor Protection:Prevents both high-temperature damage (like oil coking, bearing failure) and low-temperature issues (moisture accumulation, poor lubrication) by maintaining oil within the ideal temperature window.
3.Ensures Consistent System Efficiency:A properly functioning thermal valve helps maintain optimal oil viscosity, reducing internal friction and energy consumption. It directly contributes to stable operating conditions, which is a cornerstone of efficient compressor performance.
Technical Parameters
|
Parameter |
Description |
|
Product Model |
02250092-081 |
|
Type |
Thermal Valve Kit |
|
Temperature Range |
Calibrated for specific Sullair lubricants |
|
Material |
High-grade metals |
Product Uses
1.Pharmaceutical & Food & Beverage Processing: Maintains reliable air supply for packaging, conveying, and process control. Stable temperature regulation is part of ensuring consistent equipment performance in sensitive environments.
2.Plastics & Injection Molding Shops: Supports the constant air demand for machinery. Proper oil temperature management is key to compressor reliability, which directly impacts molding cycle consistency.
3.Workshops & Automotive Service Centers: Keeps air compressors running reliably to power lifts, spray guns, and impact wrenches.
Product Operate Guide
1.System Preparation: Start the compressor and let it run for a few minutes to warm the oil, making it less viscous. Then, shut down the compressor completely. Wait at least 10-20 minutes to allow internal pressure (P1) to fully dissipate to zero and for hot oil to drain back to the sump.
2.Valve Access: Locate the thermal valve, typically mounted on or near the oil separator vessel or cooling line block. Clean the surrounding area to prevent contamination.
3.Disassembly: Remove the bolts or housing that secures the thermal valve cartridge or side cover. Carefully extract the internal assembly. For some models, this may involve removing a circlip and pulling the element housing.
4.Cleaning & Inspection: Thoroughly clean the valve body housing with an appropriate solvent. Inspect the old seals and gaskets; it is highly recommended to replace them.
5.Installation: Install the new thermal element from the 02250092-081 kit into the clean valve body. Ensure all new provided seals (O-rings, gaskets) are correctly positioned.
6.Reassembly & Testing: Reassemble the valve housing and tighten bolts to the specified torque. Once fully reassembled and after checking oil levels, restart the compressor. Monitor the oil temperature closely during the warm-up cycle and under load to verify the valve is modulating correctly (e.g., cooler lines should warm up as the oil temperature rises above the set point).
Hot Tags: sullair thermal valve kit 02250092-081 element replacement, China sullair thermal valve kit 02250092-081 element replacement manufacturers, suppliers, Sullair Thermostatic Valve Kit Replacement, 02250078-204, 02250049 634, 88291010-174, 88290009-735, sullair thermostat valve assembly
