JRZ‑175AZ/0.8 Belt‑Drive Screw Compressor 132kW 23.2m³/min

JRZ‑175AZ/0.8 Belt‑Drive Screw Compressor 132kW 23.2m³/min
Details:
Product Number: JRZ-175AZ
Product Type: Single Stage Power Frequency Screw Air Compressor
Exhaust pressure:0.8MPa
Exhaust volume:23.2 m3/min
Motor Power:132KW
Cooling Method:Air Cooling
Payment terms: Paypal, T/T, Western Union, Visa
MOQ: 1Pcs
Customization service: Support customization
Shipping method: Sea/Air
Send Inquiry
Description
Send Inquiry
Tips: Due to the wide variety of air compressors, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
 

Product Overview

 

Part number JRZ‑175AZ/0.8 is oil‑injected single‑stage fixed‑speed (power‑frequency) belt‑drive rotary screw air compressor, rated motor power 132 kW, nominal free‑air delivery 23.2 m³/min at 0.8 MPa working pressure, air‑cooled design. Heavy‑duty V‑belt set transfers torque from motor to screw air‑end. This large‑capacity unit is built for industrial sites with relatively stable continuous compressed‑air consumption.

 

Critical technical clarification: This is oil‑injected screw compressor unit. It discharges compressed‑air with residual oil content. It CANNOT produce ISO 8573‑1 Class0 oil‑free compressed‑air. If food‑processing, high‑purity painting or other oil‑free‑air‑demanding processes are required, separate downstream refrigerated dryer plus multi‑stage inline filter kit must be configured after compressor outlet.

 

Belt‑drive specific note: Power transmission relies on heavy‑duty industrial V‑belt set. V‑belt is wearing consumable part. Belt slipping, improper tension adjustment or aging wear will directly reduce real‑world air output and trigger abnormal over‑heating. Periodic visual inspection and tension check for V‑belt are mandatory for belt‑driven large‑size model. The 20000‑hour figure is only reference design life under well‑maintained clean‑site conditions.

 

Important performance boundary note: 23.2 m³/min is nominal flow‑rate under standardized ISO‑1217 reference‑conditions. Actual free‑air delivery will decrease when working under high‑ambient‑temperature or high‑altitude location. Site‑operating‑condition data is required for pre‑order performance evaluation to avoid unsatisfactory on‑site capacity and production‑downtime.

 

Unit‑type characteristic reminder: This unit adopts fixed‑speed load‑unload control logic. It delivers stable performance under full‑load continuous‑running condition. Under heavily fluctuating air‑demand, fixed‑speed design brings relatively higher no‑load power‑consumption compared with VSD variable‑speed drive compressor. This model is recommended for large workshops with steady air‑demand; not ideal for sites with frequent large‑range air‑consumption swing.

 

Field‑service troubleshooting note: Insufficient air‑output or frequent high‑discharge‑temperature alarm does not automatically mean defective screw air‑end. Technicians shall complete upstream inspection workflow: check V‑belt slipping & wear condition → inspect intake filter clogging → verify oil‑cooler / radiator fouling → test thermostatic‑valve working performance, before judging air‑end failure.

 

Critical buying alert: Model designation JRZ‑175AZ/0.8 alone cannot guarantee perfect site‑fit. Please submit site‑information for our pre‑order technical evaluation: site altitude, maximum summer ambient‑temperature, real‑peak air‑consumption, local power‑supply specification, downstream air‑treatment requirement(dryer / filter / air‑receiver or not).

 

Customer Buying & Maintenance Priorities

 

Industrial buyers evaluating 132 kW large belt‑drive screw compressor consider multi‑dimensional practical concerns beyond unit price. Below key practical concerns are fully addressed within this page:

1. Site‑fit‑evaluation risk: Nominal flow is reference‑condition value; high‑altitude / high‑temp environment reduces real air‑output; submit site‑data before quotation.

2. Belt‑drive specific awareness: V‑belt is wearing consumable; slipping / aging leads to low air‑output & over‑heat; periodic tension & wear inspection required.

3. Fault‑diagnosis workflow: Avoid direct air‑end condemnation; inspect belt condition, intake filter, cooler fouling and thermostatic‑valve when facing low‑output / high‑temp alarm.

4. Unit‑type characteristic awareness: Fixed‑speed load‑unload design fits stable continuous‑air‑demand; relatively higher no‑load power‑consumption under fluctuating air‑demand compared with VSD model.

5. System‑matching awareness: Oil‑injected compressor cannot directly deliver food‑grade / Class0 oil‑free air; dryer & inline‑filter must be ordered separately for high‑purity‑process.

6. Warranty‑scope clarity: Main‑unit manufacturing‑defect coverage; exclude wearing‑consumables(V‑belt, filter‑elements, compressor oil); damage caused by wrong‑installation, abnormal‑power‑supply, harsh‑site‑environment; onsite commissioning labor and return‑freight not covered.

7. Project‑order support: For system integrators & large‑plant projects, export‑grade fumigated wooden‑crate packing, factory run‑test‑report & shipping‑document support; optional spare‑consumable‑kit.

8. Technical‑backup: Provide installation‑layout hint and routine‑maintenance checklist for on‑site‑technician reference.

 

Compatibility & Pre‑Order Site‑Condition Checklist

 

Model:JRZ‑175AZ/0.8

Product Type:Belt‑Drive Single‑Stage Fixed‑Speed Oil‑Injected Screw Air Compressor

Rated Motor Power:132 kW

Nominal Free‑Air Delivery:23.2 m³/min @0.8 MPa(reference‑condition)

Working Pressure:0.8 MPa

Cooling Method:Air‑Cooled

Standard Power‑Supply:380 V / 50 Hz 3‑Phase

Noise Level:88±2 dB(A)

 

Information we require before quotation:

1. Site altitude & maximum summer ambient‑temperature

2. Actual peak & average compressed‑air consumption

3. Local power‑supply voltage / frequency

4. Down‑stream requirement: whether need refrigerated‑dryer, line‑filters, air‑receiver tank

5. Working‑pattern: 24h continuous‑run or intermittent operation

6. Order‑type: single‑unit replacement / new‑plant project / with spare‑consumable‑kit

 

Order‑decision reference

‑ Prefer this model: Large‑size site with stable continuous air‑demand, air‑cooling condition available.

‑ Need further re‑evaluation: High‑altitude, persistent high‑ambient‑temp; large‑range fluctuating air‑consumption; require ISO8573‑1 Class0 oil‑free compressed‑air.

 

Core Functional Benefits

 

1. Heavy‑duty V‑belt transmission system

Industrial grade V‑belt power transmission, reference design service‑life up to 20000 hours under qualified maintenance. Belt‑drive layout facilitates access for belt tension adjustment and replacement work.

 

Note: V‑belt belongs to wearing consumable; periodic tension and wear inspection is mandatory.

 

2. Integrated intelligent monitoring & fault‑diagnosis controller

Equipped with industrial PLC touch‑screen HMI. Real‑time monitoring for discharge‑pressure, oil‑temperature, running‑hours and fault‑alarm logging. Multiple protection mechanisms: over‑temperature, over‑current, over‑pressure protection for safe large‑capacity operation.

 

3. Easy‑access canopy‑frame for routine maintenance

Quick‑open side panels offer convenient access for intake‑filter, oil‑filter, oil‑separator replacement work, shorten downtime for periodic consumable‑part service.

 

4. Large‑size air‑cooled radiator assembly

Air‑cooled integrated cooling package, suitable for industrial sites without cooling‑water resource. Sufficient surrounding ventilation clearance must be reserved during installation for reliable heat dissipation of this high‑power unit.

 

5. Vibration‑damping mounting feet

Multi‑point vibration‑damping mounts reduce vibration transmission to concrete foundation, lower secondary noise radiation inside large factory workshop.

 

Technical Specification

 

 

Parameter Value
Model JRZ‑175AZ/0.8
Type Belt‑Drive Single‑Stage Fixed‑Speed Screw Air Compressor
Rated Motor Power 132 kW
Nominal Free‑Air Delivery 23.2 m³/min @0.8 MPa (ISO‑1217 reference‑condition)
Rated Working Pressure 0.8 MPa
Cooling Method Air‑Cooled
Motor Rotational Speed 2980 r/min
Standard Power‑Supply 380 V‑50 Hz 3‑Phase
Noise Level 88±2 dB(A)
Transmission Type Industrial V‑Belt Drive (consumable part, 20000hrs reference life)
MOQ 1 Unit
Shipment Option Sea‑freight with export fumigated wooden crate, air‑freight
Payment Terms T/T, PayPal, Western Union
Important Remark Nominal flow reduces at high‑altitude / high‑temp; V‑belt is consumable; Not for direct Class0 oil‑free air output

 

Good Customers Reviews

 

product-805-764                 product-670-647            product-685-632

 

Risk Of Mis‑Application & Wrong‑Site‑Selection

 

Selecting large‑capacity compressor only by nominal catalog parameters will bring hidden production‑site risk:

 

1. Ignoring altitude & ambient‑temperature influence: Directly adopt catalog 23.2 m³/min value for high‑altitude / hot‑workshop, real‑world air‑output drops and cannot satisfy production‑peak air‑demand.

2. Mis‑application for heavily‑fluctuating air‑demand: Fixed‑speed unit works with high no‑load power‑consumption under frequent‑changing air‑consumption, resulting in long‑term extra electricity‑cost compared with VSD variable‑speed compressor.

3. Misunderstanding air‑quality performance: Expecting oil‑injected unit to deliver ISO8573‑1 Class0 / food‑grade compressed‑air; must purchase separate downstream dryer‑filter system for high‑purity‑process.

4. Neglecting belt‑drive maintenance: Skipping periodic V‑belt inspection; belt slipping / cracking leads to output‑drop, over‑heating and unexpected production‑breakdown.

 

Cost insight: Saving upfront investment by mis‑matching compressor model for real‑site working‑conditions may cause insufficient air‑supply, extra power‑consumption and expensive production‑line loss. Large‑size compressor selection is a complete system‑level evaluation instead of only checking catalog power & flow figures.

 

Typical Application Scenarios

 

This JRZ‑175AZ/0.8 belt‑drive screw compressor is designed for large‑scale industrial‑facilities with relatively stable continuous compressed‑air consumption:

‑ Heavy‑duty general‑manufacturing & metal‑fabrication workshops

‑ Automotive assembly & large‑paint‑shop auxiliary compressed‑air stations

‑ Plastic‑injection & extrusion large‑production‑lines

‑ 24‑hour continuous‑run large‑factory compressed‑air‑stations

‑ Compressed‑air system integrators, large‑plant new‑project & equipment‑renewal

 

Reminder: This oil‑injected unit itself cannot provide ISO8573‑1 Class0 / food‑grade compressed‑air. High‑purity‑process needs matched downstream dryer‑filter package as additional order item. Not recommended for sites with dramatic short‑term air‑consumption fluctuation.

 

Critical On‑Site Installation, Commissioning & Routine‑Maintenance Guidance

 

Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Cut‑off full power‑supply before opening belt‑guard or service panels. Rotating components and hot surfaces present serious personal‑injury hazard for high‑power unit.

 

1. Pre‑installation site‑preparation

Place unit on solid, rigid level concrete foundation. Reserve sufficient surrounding ventilation clearance for air‑cooled radiator heat dissipation. Guarantee workshop ambient‑temperature within 5‑40℃ range. Confirm on‑site power‑supply matches unit rated specification and complete reliable equipment grounding work. Compressed‑air outlet piping shall adopt pressure‑rated heavy‑duty pipeline, install isolation‑valve & check‑valve at compressor outlet.

2. Pre‑start‑up check before commissioning

Check lubricant oil level at sight‑glass; inspect V‑belt for proper tension, crack or fray damage; check all filter‑element status; confirm cooling‑radiator fin without heavy dust blockage. All safety‑guards including belt‑guard must be correctly installed before power‑on.

 

3. Unit commissioning & baseline‑recording

Power‑on, execute no‑load test‑run firstly, then switch to loaded operation. Monitor discharge‑pressure, oil‑temperature, running‑current under stable full‑load. Record baseline working‑data: actual output pressure, steady oil‑temperature, running‑current for future‑maintenance reference. Inspect unit for abnormal vibration and piping joint for air‑leakage.

 

4. Key periodic‑maintenance points for belt‑drive large‑size model

‑ Periodically inspect V‑belt tension, crack, fray wear status; adjust tension or replace belt as required.

‑ Replace intake‑filter / oil‑filter / oil‑separator / compressor‑oil following service‑schedule.

‑ Clean dust fouling on air‑cooled radiator fins to avoid high‑temperature trip.

‑ Check PLC fault history log, resolve early warning fault before large‑scale breakdown occurs.

 

5. Troubleshooting hint after commissioning If compressor suffers low air‑output or frequent high‑oil‑temperature trip: Do NOT judge screw air‑end defective directly. Re‑inspect V‑belt slipping / wear, intake‑filter blockage, radiator fouling and thermostatic‑valve working‑status. Many abnormal‑operation issues root in transmission & peripheral components.

 

Project‑Order & Spare‑Part Planning Guidance

 

For factory‑maintenance‑teams, compressed‑air‑system integrators:

 

1. Single‑unit emergency‑replacement: Sea‑freight / air‑freight delivery for large‑factory equipment‑renewal project.

2. Large‑plant new‑construction bulk‑order: Project‑based quotation; export fumigated wooden‑crate packing; provide shipping‑documents & factory run‑test‑report support.

3. Optional combined‑package: Match with intake‑filter / oil‑filter / oil‑separator / V‑belt consumable‑kit, or supporting refrigerated‑dryer, air‑receiver tank, inline‑filter set for one‑stop compressed‑air‑system solution.

4. Reserved‑stock‑program: We can reserve critical spare‑parts against global supply‑chain fluctuation for regular‑customers.

5. Pre‑shipment‑inspection: Factory running‑test before packing for project‑order; inspection photos available upon request.

 

Inventory suggestion: Keep critical wearing‑spares(V‑belt, three filter‑elements) on‑site for 24‑h continuous‑run large‑factory.

 

Frequently Asked Questions

 

Q1: Can JRZ‑175AZ/0.8 directly provide ISO8573‑1 Class0 or food‑grade compressed‑air?

A: No. This is oil‑injected belt‑drive screw compressor unit. To achieve food‑grade or Class0 high‑purity compressed‑air, you need to additionally order downstream refrigerated‑dryer and multi‑stage coalescing filter assembly.

Q2: Catalog shows 23.2 m³/min flow, will I obtain this flow under high‑altitude / hot‑workshop?

A: 23.2 m³/min is nominal value under standardized ISO‑1217 reference‑conditions. Actual free‑air‑delivery decreases when site is at high‑altitude or with persistent high‑ambient‑temperature. Please send site‑condition data for our pre‑order performance evaluation.

Q3: Why belt‑drive screw compressor air‑output gradually drops?

A: Most‑frequent causes: V‑belt slipping / aging‑wear; clogged intake‑air‑filter; radiator fouling; thermostatic‑valve abnormal. Inspect belt‑transmission‑system first, do not directly suspect screw air‑end damage.

Q4: Is fixed‑speed JRZ‑175AZ/0.8 suitable for factory with big fluctuation of air‑consumption?

A: Not ideal. Fixed‑speed load‑unload design brings relatively higher no‑load power‑consumption under heavily‑fluctuating air‑demand. VSD variable‑speed screw compressor will be better‑suited solution for such working‑condition. This model is recommended for relatively stable continuous‑air‑demand.

Q5: What special maintenance items for this belt‑drive large‑size screw compressor?

A: Except three‑filter & oil replacement; you must periodically inspect V‑belt tension, crack and fray wear. V‑belt is wearing consumable part.

Q6: After new unit startup, compressor still shows low air‑output or high‑temperature alarm, is air‑end defective?

A: Not necessarily. Common root‑causes: slipping or worn V‑belt, clogged intake filter, radiator fin fouling, thermostatic‑valve abnormal. Inspect peripheral components before judging air‑end failure.

Q7: What damage situation is excluded under limited product warranty?

A: Limited‑product‑warranty only covers main‑unit manufacturing‑related defects. Excluded: wearing‑consumables(V‑belt, filter‑elements, compressor‑oil); damage from wrong‑installation, abnormal‑power‑supply, harsh‑site‑environment; onsite commissioning labor and return‑shipment freight are not included.

 

Request Technical Quotation for JRZ‑175AZ/0.8 132 kW Belt‑Drive Screw Compressor

Fill inquiry‑form with full site‑condition information, downstream‑equipment‑requirement, quantity and destination‑country. Our sales‑engineer will reply quotation and lead‑time promptly.

Hot Tags: JRZ‑175AZ/0.8 Belt‑Drive Screw Compressor 132kW 23.2m³/min, China JRZ‑175AZ/0.8 Belt‑Drive Screw Compressor 132kW 23.2m³/min manufacturers, suppliers

Send Inquiry