Product Introduction
The Atlas Copco Air Filter, part number 1630040800, is a high-quality Genuine OEM intake filter element designed to protect the compressor's air end from harmful airborne particles. As the first line of defense in the compression process, this filter efficiently removes dust, dirt, and other contaminants from the intake air before it enters the compression chamber. This filter ensures optimal airflow while maintaining high filtration efficiency. It helps prevent premature wear on the screw rotors and bearings, thereby extending the service life of Atlas Copco rotary screw compressor.
Product Advantage
OEM Filtration Precision: Designed to capture particles of specific microns without restricting airflow, ensuring the compressor operates at peak efficiency and avoids energy loss due to intake blockage.
Extended Component Life: By stopping abrasive dust from reaching the air end, this filter significantly reduces wear on expensive internal parts like rotors and bearings.
Cost-Effective Maintenance: As a high-quality yet cost-effective consumable, regular replacement of the air filter is much cheaper than the cost of major compressor repairs or overhauls.
Technical Parameters
|
Part number |
1630040800 |
|
Manufacturer |
Atlas Copco |
|
Type |
Air Filter |
|
Material |
Filter Paper |
|
Filter Media |
High-efficiency cellulose or synthetic blend (pleated) |
|
MOQ |
1pcs |
|
Apply for |
Atlas Copco Air Compressor |
|
Place of origin |
Shaanxi, China |
|
Warranty |
1 Year |
Product Application
Manufacturing Facilities: Protecting compressors in environments with moderate to high dust levels, such as textile mills, woodworking shops, and metal processing plants.
General Industry: Essential for any facility relying on consistent compressed air quality to protect production machinery and pneumatic tools.
Service & Maintenance: A standard stock item for compressor service providers performing routine scheduled maintenance.
Product Operate Guide
Safety Warning: Always shut down the compressor and ensure it is isolated from the power supply (Lockout/Tagout) before performing maintenance.
1. Preparation:
Locate the air filter housing on the compressor (usually near the intake valve or on the top/side of the cabinet).
Ensure the work area is clean to avoid introducing debris into the intake when the filter is removed.
2. Removal of Old Filter:
Open the filter housing cover or door.
Carefully remove the old air filter element (1630040800) from the housing.
Important: Do not knock or shake the old filter inside the cabinet, as dislodged dust can be sucked into the compressor immediately upon restart. Remove it carefully and dispose of it properly.
3. Cleaning the Housing:
Using a clean, damp cloth, wipe the inside of the filter housing to remove any accumulated dust or dirt.
Inspect the rubber seal/gasket on the housing rim and clean it if necessary.
4. Installation of New Filter:
Remove the new 1630040800 filter from its packaging.
Inspect the new filter for any shipping damage. Check that the rubber gasket on the filter (if applicable) is properly seated and not twisted.
Insert the new filter into the housing, ensuring it sits flat and centered.
Seal Check: Ensure the gasket makes full contact with the sealing surface of the housing to prevent unfiltered air from bypassing the filter.
5. Final Steps:
Close and secure the filter housing cover or door.
Reset the air filter maintenance timer (if equipped on the controller).
Restart the compressor and check for any air leaks around the filter housing.
Hot Tags: 1630040800 air filter for atlas copco air compressor, China 1630040800 air filter for atlas copco air compressor manufacturers, suppliers, Replacement Air Filter For Atlas Copco Air Compressor, 2901920010, 1092200283, Atlas Copco Air Filter Kit, 2906009200, 2901086501
