A11513274 Oil Cooler | Replacement for Compair Screw Air Compressor

A11513274 Oil Cooler | Replacement for Compair Screw Air Compressor
Details:
Product Title: Oil cooler for compair compressorA11513274
Product Type: Oil Cooler
Product Number: A11513274
Place of origin: Shaanxi,China
Payment terms: Paypal, T/T, Western Union, Visa
MOQ: 1Pcs
Delivery method: DHL/FEDEX/UPS/EXPRESS DELIVERY
Customization service: Support customization
Shipping method: Sea/Air
Send Inquiry
Description
Send Inquiry

A11513274 air‑cooled oil cooler for Compair screw compressor. Solve over‑temperature trip‑out caused by blocked or leaking heat exchanger. Request your quote.

 

Product Overview

 

 

A11513274 is an air‑cooled oil‑to‑air heat exchanger designed as direct‑fit replacement part for Compair flooded screw air compressors. It removes compression heat from circulating lubricant oil and keeps lube oil staying within safe operating temperature window.

 

A very common maintenance misunderstanding: over‑temperature shutdown does not always mean defective oil cooler. Before ordering replacement, technicians should rule out other root causes: faulty thermostatic valve, failed cooling fan, poor machine‑room ventilation, degraded compressor oil. External fin clogging can often be restored by proper cleaning; while internal carbon‑sludge fouling, core crack and oil leakage require full cooler replacement.

 

If your Compair unit suffers repeated high‑temperature trips, persistent high oil temperature reading, visible external oil seepage from cooler core, or fin stack is physically damaged, A11513274 replacement cooler will be your solution. Delaying replacement will accelerate oil oxidation, shorten service life of oil filter and oil‑separator, and bring risk of expensive air‑end damage.

 

★Important Note: This component is dedicated for Compair screw air compressor lubrication circuit. It is NOT general‑purpose hydraulic cooler for hydraulic press, mobile construction machinery or gas compression station. Parameter ‑40℃ ~ +180℃ refers to permitted circulating oil medium temperature; normal workshop ambient operating temperature shall not exceed 40°C.

14c90eea046f71b956c4e223c0b0bad

Compatibility & Critical Pre‑Order Verification

 

Manufacturer Part Number:A11513274

Application:Air‑cooled Compair Screw Air Compressor (specific series)

 

►Critical Reminder: Do not confirm fitment only relying on part‑number from third‑party catalog. Some Compair variants adopt different cooler dimension and port layout. Please send your compressor name‑plate / serial‑number to our technical team for cross‑verification before purchase, avoid wrong‑part shipment and production downtime.

Core Functional Benefits

1. Stabilize lubricant temperature to protect air‑end components

Effective heat exchange keeps compressor oil inside OEM‑specified working range. Proper oil temperature preserves lubricant viscosity and oil‑film performance for rotor and bearings, slows oil degradation rate.

 

2. Dual‑scenario damage resistance for compressor compartment

Aluminum alloy fin‑tube core + steel mounting frame resists continuous vibration inside compressor cabinet. Proper shock‑absorbing mounting avoids micro‑crack generation on aluminum core caused by long‑term machine vibration, which is a common source of slow oil seepage.

 

3. Reduce unplanned downtime triggered by over‑temperature protection

A failed cooler will cause frequent high‑temp trip‑out and interrupt production air supply. Installing matched A11513274 heat exchanger restores original thermal dissipation capacity for your Compair compressor.

 

4. Drop‑in replacement without mechanical modification

Identical mounting hole position, oil port size and overall dimension as OEM unit. No cutting, drilling or pipe adaptor modification required during swap‑out.

 

5. Lower long‑term maintenance cost

Timely replacement of defective oil cooler prevents secondary damage to oil filter, oil‑separator and main air‑end, avoiding far‑higher overhaul expense.

 

Technical Parameters

 

Parameter Value
Part Number A11513274
Component Type Air‑cooled oil‑to‑air heat exchanger (oil cooler)
Core Material Aluminum alloy fin‑tube; Steel mounting housing
Permitted circulating oil medium temperature ‑40℃ ~ +180℃
Recommended workshop ambient temperature ≤40°C
MOQ 1 Piece
Shipment Option DHL/FedEx/UPS express, air freight, sea freight
Payment Terms T/T, PayPal, Western Union, Visa
Customization Custom heat exchanger solution available upon inquiry

 

Typical Application Scenarios

 

This A11513274 oil cooler is used exclusively for facilities operating matched Compair air‑cooled screw compressors:

 

•General manufacturing and metal‑processing workshops

•Automotive assembly and painting production lines

•Food & beverage processing plants

•Pharmaceutical manufacturing workshops

•Plastic processing factories

 

When you encounter recurring high‑temperature alarm, visible oil leakage on cooler surface, or physical deformation of fin stack, arrange inspection or replacement work.

 

On‑Site Installation & Post‑Replacement Guidance

 

►Safety reminder: Strictly follow full LOTO lock‑out‑tag‑out procedure. Fully shut‑down compressor, release system pressure and wait complete cooling before disassembling oil circuit components. Hot lubricant can cause severe burn injury.

 

1. Pre‑installation inspection & system preparation

Depressurize and cool down compressor. Drain residual lubricant from cooler loop. Inspect old unit: distinguish if failure comes from external fin clogging, internal carbon fouling or core crack. Clean mounting bracket surface, remove carbon sludge and debris.

 

★Important: Aluminum alloy core is brittle under over‑torque. Do not over‑tighten mounting bolts, shock‑absorbing rubber cushion shall be kept to dampen running vibration.

 

2. Oil circuit connection work

Install new A11513274 oil cooler on vibration‑isolated bracket. Replace all old gaskets and O‑rings on oil inlet & outlet ports. Re‑use aged seals will lead to hidden oil leakage. Align oil port direction correctly, avoid pipe twisting and mechanical stress on cooler core.

 

3. System flush suggestion (strongly recommended) If old cooler suffers heavy internal carbon‑sludge fouling, flush the whole oil circulation loop before starting‑up. Residual carbon particles will quickly contaminate brand‑new cooler internal channels and shorten its service life.

 

4. Commissioning and post‑start‑up observation

Refill compressor lubricant to correct level. Start compressor and run under normal full‑load condition for 30‑60 minutes.

•Continuously monitor real‑time oil temperature value;

•Check all port joints for oil seepage;

•Inspect cooling fan working status and cabinet ventilation condition. Record stable operating oil‑temperature baseline for future maintenance reference.

 

5. Troubleshooting hint after replacement If over‑temperature symptom still exists after cooler swap‑out, do not judge cooler defective directly. Further inspect thermostatic valve operation, cooling fan rotation, oil quality and machine‑room ventilation. Many over‑heat faults root in these parts rather than heat‑exchanger itself.

 

Real Customer Reviews

 

product-805-764           product-670-647              product-685-632

 

Frequently Asked Questions

 

Q1: My Compair compressor triggers high‑temperature trip, does that mean I have to replace A11513274 oil cooler?

A: Not necessarily. High‑temperature shutdown can be caused by faulty thermostatic valve, damaged cooling fan, poor ventilation or degraded compressor oil. You need to diagnose step‑by‑step. Only when cooler core cracks, leaks oil or internal channel is blocked by non‑washable carbon sludge shall you replace this part. External fin dust clogging can be cleaned.

 

Q2: Can I clean dirty oil cooler instead of buying new A11513274?

A: Two different situations: External dust and debris on cooling fins can be carefully cleaned with low‑pressure dry compressed‑air. But if internal oil channel is filled with hard carbon sludge, simple flushing cannot fully restore heat‑exchange efficiency, replacement is required.

 

Q3: What risk will happen if I ignore oil cooler leakage or clogging?

A: Clogged cooler leads to sustained high oil temperature, accelerates lubricant oxidation; oil carbon deposit will contaminate oil filter and oil‑separator. Cracked core creates oil leakage risk, may eventually cause air‑end insufficient‑lubrication damage.

 

Q4: Does A11513274 fit all Compair screw compressors?

A: No, it only serves specific air‑cooled Compair screw compressor series. Water‑cooled models adopt different heat‑exchanger parts. Please send compressor serial‑number for our technical cross‑check before ordering.

 

Q5: What should I pay special attention to during installation?

A: Three key points: 1) Keep vibration‑isolation rubber cushion, avoid rigid direct mounting; 2) Never over‑torque bolts to prevent aluminum core crack; 3) Replace all port gaskets, do not reuse old sealing components.

 

Why Source A11513274 Oil Cooler From Us

 

•Pre‑order compatibility verification: Submit compressor serial‑number, our technical team double‑check fitment before shipment to avoid wrong‑part delivery.

•Pre‑shipment visual inspection: Check core integrity, fin condition, thread and mounting dimension before packing; inspection video available for bulk‑order request.

•Flexible global logistics: Urgent express delivery for emergency breakdown maintenance; sea‑freight option for bulk‑project procurement.

•Technical support: If you meet compressor over‑temperature troubleshooting confusion, send equipment name‑plate info and we can give spare‑part reference suggestion.

 

Get a Free Quote for A11513274 Oil Cooler

 

📞 Tel: +86-18992995984

📧 infor@aircompressorglobal.com

Hot Tags: A11513274 Oil Cooler | Replacement for Compair Screw Air Compressor, China A11513274 Oil Cooler | Replacement for Compair Screw Air Compressor manufacturers, suppliers, Compair air cooler spare parts, Compair Oil cooler Regatta 200, Compair Compressor Spare Parts Compressor Cooler, A11513274, 100005313, Compair Air Compressor Cooler Replacement Part

Send Inquiry