CompAir SSL-46 Compressor Oil | ISO VG 46 Mineral Lubricant

CompAir SSL-46 is an ISO VG 46 mineral-based compressor lubricant intended for compatible oil-injected screw air compressor applications under standard industrial operating conditions.

Compressor lubricant is responsible for more than simply reducing friction. During normal operation, it can contribute to lubrication, cooling, sealing, and protection of internal compressor components. Choosing the correct viscosity grade and lubricant formulation is therefore important for maintaining reliable compressor performance.

We supply SSL-46 compatible compressor oil for customers who need an alternative maintenance lubricant. Where available, we can also check the supply of a genuine original product according to the customer's requirements.

If you need to verify the product before placing an order, we can provide actual product photos, label photos, and packaging information before shipment upon request.

If you are unsure whether SSL-46 is suitable for your compressor, send us the compressor model, current lubricant information, nameplate, or a photo of the existing oil container. Our team can help check the requested application before quotation.

For product inquiries, you can contact us at sell@aircompressorglobal.com.

The specifications below are provided for product identification and purchasing reference. Final lubricant suitability should always be checked against the compressor manufacturer's requirements and actual operating conditions.

Technical note: The temperature range shown above is a product reference value and should not be interpreted as a universal operating limit for every compressor. The compressor manufacturer's recommended lubricant specification and operating limits should take priority.

SSL-46 is an ISO VG 46 mineral-based compressor lubricant intended for compatible compressor applications.

In an oil-injected screw compressor, lubricant circulates through the compression system while the compressor is operating. The oil can perform several functions at the same time, including reducing friction, carrying away heat, helping seal the compression chamber, and protecting components from wear and oxidation.

For this reason, compressor oil selection should consider more than the viscosity grade alone.

The compressor model, lubricant specification, operating temperature, load, running hours, and maintenance conditions should all be considered before changing from one lubricant to another.

ISO VG 46 is a viscosity classification that describes the lubricant's viscosity range.

Viscosity affects how easily the lubricant flows through the compressor lubrication system and how effectively it can maintain an oil film under operating conditions.

A lubricant that is too viscous or too thin for a particular compressor may affect oil circulation, cooling, sealing, or component protection.

However:

ISO VG 46 alone does not confirm compatibility with every air compressor.

The compressor manufacturer's specified lubricant type and performance requirements should always be checked before using a replacement oil.

This is especially important when replacing a synthetic or semi-synthetic lubricant with a mineral-based product.

The lubricant in an oil-injected screw compressor can contribute to several aspects of compressor operation.

Lubrication

The oil forms a protective film between moving components and helps reduce friction and mechanical wear.

Heat Transfer

Circulating lubricant helps remove heat generated during compression and mechanical operation.

Sealing

In an oil-injected screw compressor, oil contributes to sealing between the rotating screw elements and supports the compression process.

Component Protection

An appropriate lubricant formulation can help protect internal components against oxidation, corrosion, and wear under suitable operating conditions.

Contamination Management

The lubricant system works together with oil filters and oil separators to manage contaminants and maintain the required oil condition.

The actual performance of the lubricant depends on compressor design, operating conditions, oil condition, and maintenance practices.

Different compressor lubricants use different base oil technologies. Mineral, semi-synthetic, and fully synthetic lubricants can have different performance characteristics and potential service intervals.

Mineral oil may be a practical choice for suitable compressors operating under relatively standard conditions.

However, lubricant service life cannot be determined solely from the base oil type.

Actual oil life depends on:

·Compressor operating temperature

·Load conditions

·Ambient environment

·Daily running hours

·Moisture and contamination

·Compressor condition

·Lubricant formulation

·Maintenance practices

The compressor manufacturer's recommended oil-change interval should always take priority.

There is no universal oil-change interval that applies to every compressor.

The actual replacement interval should be determined according to the compressor manufacturer's recommendations and the condition of the lubricant.

More frequent inspection may be appropriate when the compressor operates under:

·High ambient temperatures

·Heavy loads

·Long daily operating hours

·Dusty environments

·High humidity

·Frequent start-stop cycles

·Other demanding conditions

Possible signs that lubricant condition should be checked include:

·Unusual oil discoloration

·Abnormal odor

·Excessive contamination

·Increased operating temperature

·Unusual oil consumption

·Changes in compressor operating behavior

The previously mentioned 3000–4000 hours for mineral oil, 4000–6000 hours for semi-synthetic oil, and 8000–10000 hours for synthetic oil should only be regarded as general reference ranges rather than guaranteed service intervals.

The actual replacement interval must be determined according to the specific compressor, lubricant, and operating environment.

No.

Two compressor oils may both be classified as ISO VG 46 while having different base oils, additive systems, performance characteristics, and application recommendations.

For this reason, a proper lubricant selection should consider:

·Compressor manufacturer

·Compressor model

·Recommended lubricant specification

·Existing lubricant

·Viscosity grade

·Operating temperature

·Compressor load

·Running hours

·Ambient conditions

·Lubricant change history

If you are replacing an existing compressor lubricant, we recommend confirming the application before placing the order.

You can send us a photo of the current oil label or the compressor nameplate for checking.

We can supply an SSL-46 compatible replacement lubricant for customers looking for an alternative maintenance option. Where available, we can also check the supply of a genuine original product.

Compatible Replacement

The compatible option is intended for customers seeking an alternative lubricant for a suitable compressor application.

It is not manufactured or branded by CompAir.

Application compatibility should be confirmed before changing from the existing lubricant.

Original Product

For customers who specifically require the original CompAir product, we can check availability and provide a quotation where the requested product is available.

When requesting a quotation, please specify:

Compatible Replacement

or

Original Product

This allows us to provide the appropriate supply option.

If you are not certain whether SSL-46 is suitable for your compressor, please provide any available information such as:

·Compressor brand

·Compressor model

·Compressor serial number

·Compressor nameplate

·Existing lubricant name

·Existing lubricant label

·Current viscosity grade

·Operating temperature

·Daily running hours

·Photo of the existing oil container

This information allows us to better understand the application before quotation.

For compatibility checking, you can send the details to sell@aircompressorglobal.com.

Before replacing compressor oil, the equipment should be safely shut down and prepared according to the compressor manufacturer's maintenance procedure.

A typical oil-change process includes:

·Shut down the compressor and make sure it is in a safe maintenance condition.

·Follow the manufacturer's instructions for releasing system pressure.

·Drain the existing lubricant completely according to the equipment procedure.

·Inspect the drained oil for unusual contamination or signs of operating problems.

·Inspect or replace the oil filter as required.

·Add the recommended quantity of the new lubricant.

·Check the oil level according to the compressor manufacturer's procedure.

·Start the compressor and inspect for abnormal leakage or operation.

·Recheck the oil level after the lubricant has circulated.

When changing between different lubricant formulations, follow the compressor manufacturer's recommended procedure.

Do not use a generic flushing detergent unless it is specifically approved for the compressor and lubricant system.

We understand that international buyers may need to confirm the actual product before shipment.

For available orders, customers can request:

·Real product photos

·Product label photos

·Packaging photos

·Quantity confirmation

·Product identification information where available

This gives customers an opportunity to compare the supplied product and packaging with their purchasing requirements before dispatch.

Packaging can be arranged according to product requirements, order quantity, destination, and transportation method.

Customized packaging can also be discussed for suitable orders, subject to minimum order requirements.

Customers who require safety and handling information can request the MSDS for the product.

We can also provide available product information and actual product photos during the quotation and order-confirmation process.

For product documentation or application questions, contact our sales team at sell@aircompressorglobal.com.

CompAir-compatible compressor lubricants can be relevant to a variety of B2B buyers, including:

·Air compressor distributors

·Compressor service companies

·Industrial equipment suppliers

·Compressor repair workshops

·Spare parts wholesalers

·Factory maintenance departments

·Industrial end users

For distributors and service companies, we can also discuss requirements for multiple compressor spare parts and lubricants in the same order.

If you have a compressor maintenance list, you can send the complete list for product and availability checking.

To request a quotation for CompAir SSL-46, please provide:

Required Quantity + Packaging Requirement + Destination Country

For application checking, please also provide:

Compressor Model + Current Lubricant + Operating Conditions

Available payment methods may include:

·T/T

·PayPal

·Western Union

·Visa

International delivery can be arranged according to the order and destination, including:

·DHL

·FedEx

·UPS

·International express

·Sea freight

·Other suitable freight solutions

Final freight costs and delivery times depend on the product quantity, packaging, destination, and selected transportation method.

For pricing and availability, email us at sell@aircompressorglobal.com.

Customers purchasing compressor lubricant may also require other maintenance components.

Related products can include:

·CompAir oil filters

·CompAir air filters

·CompAir oil separators

·CompAir compressor valves

·CompAir compressor controllers

·CompAir lubricants

·Compressor maintenance kits

·Other compressor spare parts

If you are sourcing several CompAir components, you can send us the complete part number list so we can check the available products together.

We value genuine feedback from customers who purchase compressor lubricants and spare parts from us.

1. What is CompAir SSL-46?

CompAir SSL-46 is an ISO VG 46 mineral-based compressor lubricant intended for compatible compressor applications, particularly suitable oil-injected screw compressor systems where this lubricant specification is required.

2. Is SSL-46 mineral oil?

Yes. The product information identifies SSL-46 as a mineral-based compressor lubricant with an ISO VG 46 viscosity grade.

3. What does ISO VG 46 mean?

ISO VG 46 is a viscosity classification used to describe the lubricant's viscosity range. It helps indicate how the oil flows through the compressor lubrication system under specified conditions.

4. Can I use SSL-46 in any ISO VG 46 compressor?

No. ISO VG 46 alone does not confirm compatibility. The compressor manufacturer's lubricant specification, compressor model, operating conditions, and lubricant formulation should also be considered.

5. How long does CompAir SSL-46 last?

There is no universal fixed service interval. Actual lubricant life depends on operating temperature, compressor load, contamination, running hours, equipment condition, and maintenance requirements.

6. Can I mix SSL-46 with another compressor oil?

Different lubricant formulations should not be mixed unless compatibility has been confirmed. When changing lubricant types, follow the compressor manufacturer's recommended oil-change or flushing procedure.

7. Can you provide an MSDS?

Yes. MSDS can be provided upon request for customers who require product safety and handling information.

8. Can you provide product photos before shipment?

Yes. We can provide actual product and packaging photos before shipment upon request, subject to the available product and order arrangement.

Hot Tags: CompAir SSL-46 Compressor Oil | ISO VG 46 Mineral Lubricant, China CompAir SSL-46 Compressor Oil | ISO VG 46 Mineral Lubricant manufacturers, suppliers, Compair SSL 46, CompAir 4000H Screw Oil, Compair lubricant S 46, Compair air compressor oil, SCWO4000-20