55135170200 in‑built oil‑separator for Kaishan SKY‑series screw compressor. Control oil carry‑over, replace on high differential pressure. Request your quote today.
Product Overview
The 55135170200 is an in‑built coalescing oil‑separator element fitted inside the air‑oil separator tank of Kaishan SKY‑series flooded screw compressors. Its core mission is capturing sub‑micron oil mist after primary centrifugal gravity separation, limiting residual oil content in compressed‑air output, cutting excessive lubricant consumption and protecting downstream pneumatic equipment.
Many maintenance teams rely purely on running‑hour counter for replacement. However, heavy‑dust intake, degraded compressor lubricant, carbon sludge and high‑humidity workshop environment will blind separator media long before reaching reference service hours. Differential pressure reading across separator is the most reliable replacement trigger, not only runtime.
A degraded separator element brings severe real‑world losses: oil mist contaminates painting workpieces, food‑grade production lines and precision pneumatic components; compressor oil consumption rises sharply; blocked filter media creates higher pressure drop, raising power cost for your whole compressed‑air station. Replacing part 55135170200 on‑time avoids these avoidable production losses.
★Important note: This is a flanged in‑built coalescing separator element. It does NOT come with automatic back‑washing function. Filtration performance depends on multi‑layer glass‑fiber coalescing media, physical replacement is required once media is saturated or blinded by contaminants.

Compatibility & Pre‑Order Verification
Manufacturer Part Number:55135170200
Applicable Compressor:Kaishan SKY30, SKY75, SKY160 Screw Air Compressor (In‑built separator tank configuration)
Critical Reminder: Do not confirm fitment only by series name. Some SKY variants adopt different separator dimensions. Please send your compressor name‑plate / serial number to our sales engineer for cross‑verification before purchase, prevent wrong‑part shipment and costly downtime.
Reference Service Life Guidance:
•Standard clean‑industrial environment:3000‑4000 operating hours
•Dusty / cement / textile / high‑humidity workshop:shorten cycle to 2000‑2500 hours
•Mandatory replacement when separator differential pressure reaches 0.12 MPa (1.2 bar), regardless of accumulated running hours.
Core Functional Benefits
1. Control residual oil content for downstream production quality
Multi‑layer fine glass‑fiber coalescing media traps sub‑micron oil aerosol. Well‑functioning 55135170200 keeps compressed‑air residual oil below 3ppm, preventing oil stain defects for painting, food‑processing and pharmaceutical production lines.
2. Reduce extra energy loss caused by separator blockage
As contaminants accumulate on separator media, differential pressure rises and compressor consumes extra electricity to maintain working pressure. Timely element replacement keeps pressure‑drop within original design window and lowers long‑term power expense.
3. Robust structure adapted to internal separator‑tank environment
Metal end‑caps, reinforced support mesh and heat‑resistant sealing gasket withstand continuous oil mist impact, pressure fluctuation and carbon‑sludge pollution inside oil‑air tank. Built‑in static‑grounding rivet maintains electrostatic dissipation - do NOT remove this rivet during installation.
4. Minimize compressor lubricant waste Captured oil mist condenses into droplets, collecting at separator bottom and flowing back to compressor head through scavenge return tube. Proper working separator largely cuts frequent oil top‑up work.
5. Direct drop‑in replacement for Kaishan SKY series Matching flange dimension and gasket profile for original tank housing. No mechanical modification needed when swapping old element.
Technical Specification
| Parameter | Value |
|---|---|
| Part Number | 55135170200 |
| Type | In‑built flange‑mount coalescing oil‑separator element |
| Filter Media | Multi‑layer imported glass‑fiber coalescing material |
| Working Ambient Temperature | -10°C ~ +70°C |
| Residual Oil Content | ≤3 ppm (under nominal working condition) |
| Trigger for Mandatory Replacement | ΔP ≥0.12 MPa |
| Reference Service Life | 3000‑4000hrs (clean environment) |
| MOQ | 1 Piece |
| Shipment Option | DHL/FedEx/UPS express, air freight, sea freight |
| Payment Terms | T/T, PayPal, Western Union, Visa |
| Customization | Custom separator element available upon inquiry |
Typical Application Scenarios
This 55135170200 oil separator serves facilities running Kaishan SKY series screw compressors:
•General manufacturing & metal‑processing workshops
•Automotive painting and assembly plants
•Food & beverage production lines
•Pharmaceutical manufacturing workshops
•Textile mills with heavy fiber‑dust intake
•Cement plants and construction‑site supporting compressed‑air station
If you observe excessive oil consumption, oil stains at air outlet, or separator differential‑pressure reading approaching 0.12 MPa, plan separator replacement as priority maintenance work.
On‑Site Installation & Post‑Replacement Guidance
Safety reminder: Always perform full LOTO lock‑out‑tag‑out procedure. Shut‑down compressor fully, release ALL internal tank pressure, wait sufficient cooling before opening separator‑tank cover. Hot lubricant may cause burn injury.
1. Pre‑installation preparation
Depressurize compressor completely. Remove separator‑tank cover. Clean carbon sludge and debris inside tank housing. Discard old gasket/seal, always fit brand‑new sealing gasket together with new 55135170200 separator element.
Notice: This is flange‑type built‑in separator, DO NOT rotate / twist separator element itself for tightening. Tighten tank‑cover bolts only, adopt diagonal‑cross tightening sequence to avoid cover tilt and sealing gap. Keep static‑ground rivet intact.
2. Scavenge return‑tube inspection (very often ignored)
Inspect the small oil scavenge return tube and orifice before closing tank cover. Carbon‑sludge blockage on scavenge orifice will lead to oil carry‑over even with brand‑new separator element. Clean or replace scavenge parts if blocked.
3. Tank‑cover reassembly
Position new gasket and new separator element correctly. Mount tank‑cover, tighten bolts gradually in diagonal sequence, follow torque requirement from Kaishan service manual. Uneven bolt torque creates micro‑gap, causing oil bypass failure.
4. Commissioning and post‑start‑up observation
Restore all connections. It is strongly recommended to replace compressor lubricant together with separator element, avoid cross‑contamination by old degraded oil. Start compressor, run under normal load for 30‑60 minutes.
•Record baseline separator differential‑pressure value for future comparison;
•Inspect tank‑cover joint for oil leakage;
•Observe compressed‑air oil‑carry‑over condition.
5. Troubleshooting hint
If excessive oil‑carry‑over still occurs after installing brand‑new 55135170200 element, do not directly assume separator defective. Further check: compressor over‑oil‑filling level, scavenge‑orifice blockage, minimum‑pressure‑valve malfunction and cooler operating condition.
Real Customer Reviews

Frequently Asked Questions
Q1: Can I judge replacement time purely according to 4000 running‑hours?
A: Running‑hour value is only reference. In dusty or high‑humidity workshop, separator media may get blinded much earlier. Differential pressure ≥0.12 MPa is hard trigger for replacement regardless of hours.
Q2: After installing new 55135170200 separator, my compressor still carries oil into compressed‑air, why?
A: Oil carry‑over is not always separator fault. Common root causes: blocked scavenge return orifice, over‑filled compressor lubricant, failed minimum‑pressure valve, carbon‑sludge contamination inside separator tank. Inspect these items before judging separator quality.
Q3: Can I clean and reuse the old oil‑separator element?
A: Not recommended. Pulse‑air cleaning can only remove surface dust, cannot restore original coalescing performance of glass‑fiber media. Micro‑fracture inside fiber layer will cause hidden oil‑bypass risk. For production‑critical compressors, full replacement is required.
Q4: Does 55135170200 fit all Kaishan screw compressors?
A: It is dedicated for SKY30 / SKY75 / SKY160 series with in‑built separator‑tank configuration. Other Kaishan series may use different part‑numbers. Send compressor serial‑number for our technical cross‑check before ordering.
Q5: Why should I change compressor oil when I replace oil‑separator element?
A: Degraded lubricant contains carbon particles and sludge, which will rapidly blind brand‑new separator media. Replacing oil together extends separator real service life.
Why Source 55135170200 Oil Separator Element From Us
•Pre‑order compatibility verification: Submit your compressor serial number, our team double‑check part fitment before shipment to avoid wrong‑part delivery.
•Visual pre‑shipment inspection: Inspect media integrity, gasket condition and flange flatness before packing. Inspection video available upon bulk‑order request.
•Flexible global logistics: Express delivery for urgent breakdown maintenance; sea‑freight solution for bulk‑project procurement.
•Spare‑part technical support: If you need full maintenance kit (air filter, oil filter, oil separator) for your Kaishan SKY‑series unit, share machine name‑plate information and we will confirm complete list for you.
Request Quote for 55135170200 Now
Fill inquiry form with compressor serial‑number, required quantity and destination country, our sales engineer will reply quotation and lead‑time quickly.
Hot Tags: 55135170200 Oil Separator Element | Kaishan SKY30 SKY75 SKY160 Compressor, China 55135170200 Oil Separator Element | Kaishan SKY30 SKY75 SKY160 Compressor manufacturers, suppliers, SCWO4000-20, Compair lubricant S 46, CompAir 4000H Screw Oil, Compair SSL 46, Compair air compressor oil
