Product Overview
The Genuine OEM A11917574 screw airend is factory‑original rotor‑bearing core assembly for Gardner‑Denver oil‑injected rotary screw compressors.
★Important Statement: This is 100% genuine brand‑new OEM unit. NOT rebuilt, NOT reconditioned, NOT third‑party aftermarket copy. It performs primary air compression inside your industrial compressor. Airend failure represents one of the most costly downtime risks for industrial compressed‑air stations.
Critical buying warning: Part number A11917574 alone is NOT sufficient to confirm compatibility. Even genuine OEM parts may differ in rotor rotation direction, coupling dimension, port layout and machine hardware revision. Always provide full compressor serial‑number plus photo of old‑airend name‑plate for our technical cross‑verification before placing your order.
Maintenance buyers commonly confuse three airend solution types:
1. Genuine OEM new airend: Factory‑brand‑new assembly, original rotors and bearings, full factory traceability. Best choice for critical‑uptime production facilities.
2. Rebuilt / reconditioned airend: Used airend disassembled and repaired with replacement bearings. Suitable for non‑critical production equipment with cost constraints.
3. Aftermarket copy: Third‑party manufactured non‑original airend.
Minor bearing wear and light rotor scuffing can be fixed by rebuild service. Genuine OEM new‑airend swap‑out is highly recommended under severe damage scenarios: rotor seizure, heavy rotor tooth abrasion, cracked housing where rebuild cannot restore factory‑grade reliability.
Many maintenance teams treat new airend as plug‑and‑play component. Skipping oil‑circuit flushing, shaft alignment and mandatory run‑in procedure will lead to premature bearing damage and abnormal vibration even for genuine brand‑new OEM airends.
Note: This is oil‑injected screw airend for lubricated compressor circuit. It cannot produce ISO 8573‑1 Class‑0 oil‑free compressed air. All service‑life figures are reference values under ideal clean, well‑maintained lab‑only operating conditions. Actual service life heavily depends on site environment, oil quality and regular maintenance.

Compatibility & Pre‑Order Verification
Genuine OEM Part Number:A11917574
Application:Genuine replacement for matched Gardner‑Denver oil‑injected rotary screw compressor series
Information we require before quotation:
1. Full compressor serial number
2. Clear photo of original old‑airend name‑plate (rotation direction, coupling dimension)
3. Working pressure range of your existing unit
4. Fixed‑speed or VSD variable‑speed configuration
Reference design lifetime: >80,000 operating hours (ideal clean, stable‑load, proper‑lubrication lab‑only reference). Real‑world service life depends heavily on site dust, oil condition and maintenance schedule.
Core Functional Benefits
1. Restore factory‑original compression performance
Adopts Gardner‑Denver factory‑specified asymmetric twin‑screw rotor profile. Genuine A11917574 airend delivers exact OEM‑specified free‑air delivery (FAD). Eliminates low‑air‑output trouble caused by worn rotor tooth surfaces, no performance deviation versus original unit fitted on your compressor.
2. Original heavy‑duty bearing assembly for 24/7 continuous‑duty production
Factory pre‑installed matched heavy‑duty bearings, engineered for high radial‑axial load under non‑stop industrial operation. Mandatory run‑in after installation is required to achieve expected OEM bearing service life.
3. Strict factory dynamic balancing for low‑stable vibration
Every genuine OEM airend completes factory dynamic balancing test. Controlled vibration level protects motor, coupling and whole compressor frame, reduces fatigue damage for piping and surrounding components.
4. 1:1 OEM‑matching mounting and port geometry
Original mounting foot position, oil‑gas port layout and coupling interface for matched GD compressor models. Large‑scale frame modification is not required during replacement. Minor adaption might still apply for special hardware revisions.
5. Factory traceability & minimize unplanned downtime risk
Comes with factory‑original marking and traceable part information. For critical production lines where rebuilt or aftermarket units carry unknown reliability risk, genuine OEM airend reduces unexpected breakdown loss.
Technical Specification
| Parameter | Value | Reference Test Standard |
|---|---|---|
| Part Number | A11917574 (Genuine OEM) | Gardner‑Denver spare‑part specification |
| Assembly Type | Oil‑injected twin‑screw airend rotor‑bearing assembly | - |
| Full‑load displacement | 6.2 m³/min | ISO 1217:2009 |
| Rated rotating speed | 2950 rpm | DIN 1940‑1 |
| Working pressure range | 7‑13 bar | ANSI/ASME PTC 10 |
| Noise level (1‑meter distance) | ≤72 dB(A) | ISO 2151 |
| Reference design lifetime | >80000hrs (ideal lab‑only reference condition) | ISO 5389 |
| MOQ | 1 Piece | - |
| Shipment | DHL/FedEx/UPS express, air freight, sea freight | - |
| Payment | T/T, PayPal, Western Union | - |
| Important Remark | Genuine OEM brand‑new unit; NOT rebuilt / NOT aftermarket copy | - |
Remarks: Airend assembly does NOT contain drive motor; motor parameters belong to your existing compressor package.
Typical Application Scenarios
This genuine OEM A11917574 airend is targeted for industrial facilities operating matched Gardner‑Denver oil‑injected screw compressors, especially for critical‑uptime production lines:
•General manufacturing & metal‑working plants
•Automotive assembly workshops
•Plastic & rubber processing factories
•Paper‑making compressed‑air stations
•24‑hour continuous‑operation production facilities
Evaluate genuine OEM airend replacement when you meet these symptoms: rotor locked‑up seizure, obvious metal grinding noise, permanent large drop of free‑air output, persistent high vibration which rebuild cannot repair.
Real Customer Reviews

Critical On‑Site Installation & Commissioning Guidance
Safety warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Disconnect main power supply before any drive‑train mechanical work.
1. Pre‑installation system flushing (often skipped step)
Remove old damaged airend. Fully flush the whole compressor oil‑circulation loop. Residual carbon sludge and metal debris left inside piping / cooler will quickly abrade brand‑new genuine OEM rotor‑bearing assembly. Inspect oil‑filter housing and piping for metal particle contamination.
2. Coupling and precise shaft‑alignment work
Mount new genuine A11917574 airend on base frame. Complete precise motor‑to‑airend shaft coupling alignment. Mis‑alignment is the top cause for high vibration and premature bearing failure after airend swap‑out. Follow torque values from Gardner‑Denver official service manual.
3. Mandatory step‑by‑step run‑in procedure - DO NOT apply full‑load immediately
Brand‑new genuine OEM airend cannot run under full working pressure upon startup: ‑ Phase 1: No‑load idle run for 30‑60 minutes ‑ Phase 2: Step‑by‑step partial‑load operation ‑ Phase 3: Gradually rise up to full rated working pressure Continuously monitor vibration, oil temperature and noise value during full run‑in cycle.
4. Post‑commissioning baseline recording
Finish run‑in procedure. Record baseline vibration reading, oil temperature and FAD performance data for future maintenance reference. Replace full‑set compressor lubricant, oil filter and oil‑separator together with new airend.
5. Troubleshooting hint after installation
If high‑vibration occurs after replacement, do not directly judge airend defective. Re‑inspect shaft alignment, coupling element condition, base‑frame rigidity and residual metal contamination inside oil circuit.
Frequently Asked Questions
Q1: Is A11917574 genuine OEM, rebuilt or aftermarket copy?
A: This is 100% genuine brand‑new OEM Gardner‑Denver A11917574 airend. Neither rebuilt/reconditioned unit nor third‑party aftermarket copy. It keeps factory‑original marking and part traceability.
Q2: Can I place order only by providing part‑number A11917574?
A: No. Even genuine OEM units with identical part‑number may differ on rotation direction, coupling and port revision. We require full compressor serial‑number plus old‑airend name‑plate photo for compatibility cross‑check, to avoid expensive wrong‑part delivery.
Q3: When should I select genuine OEM new airend instead of rebuild service?
A: Choose rebuild service for minor bearing wear and light rotor scuffing for non‑critical equipment. Select genuine OEM A11917574 for rotor seizure, heavy rotor tooth abrasion, housing crack, or production lines requiring maximum uptime and factory‑level reliability.
Q4: Why does newly‑installed genuine OEM airend produce high vibration?
A: The most common reasons are poor shaft‑motor coupling mis‑alignment, worn coupling element, loose base frame, or residual metal debris inside oil circuit. It is not always airend manufacturing defect.
Q5: Is genuine OEM A11917574 plug‑and‑play just after bolting on?
A: No. Oil‑circuit full flushing, precise coupling alignment and step‑by‑step run‑in procedure are mandatory. Direct full‑load startup leads to premature bearing failure even for genuine OEM airend.
Q6: What export‑grade packing is used for heavy‑weight genuine OEM airend shipment?
A: Multi‑layer export‑grade package: internal anti‑rust preservation oil / barrier film; shock‑absorbing EPS cushion; heavy‑duty reinforced plywood wooden crate. Please inspect outer crate and factory‑original seal right after goods arrival.
Q7: Does product warranty cover overseas on‑site technician labor cost?
A: Limited genuine OEM product warranty only covers airend manufacturing defect itself. Overseas on‑site labor, installation cost and return‑shipment freight are NOT included within basic warranty scope.
Why Source Genuine OEM A11917574 Airend From Us
•Genuine OEM original supply: 100% factory‑new Gardner‑Denver airend; not rebuilt, not aftermarket copies, with factory marking and traceability.
•Pre‑order full compatibility evaluation: Submit compressor serial‑number and old‑airend name‑plate photo. Our technical team verify rotation direction, coupling and dimension before shipment to prevent mis‑fit.
•Pre‑shipment inspection: Verify factory‑original marking and packaging before dispatch.
•Heavy‑item export‑oriented packing: Reinforced plywood crate with anti‑rust preservation for sea or air transit.
•Technical support: Installation checklist and run‑in guidance document available upon order confirmation.
Request Technical Quotation for Genuine OEM A11917574 Airend
Fill inquiry form with compressor serial‑number, old‑airend plate photo, target working pressure, quantity and destination country. Our sales‑engineer will reply quotation and lead‑time promptly.
Hot Tags: Genuine A11917574 OEM Screw Airend | Gardner‑Denver Compressor Original Air End, China Genuine A11917574 OEM Screw Airend | Gardner‑Denver Compressor Original Air End manufacturers, suppliers, air compressor air end, 87398897, AIREND for Gardner Denver Screw Air compressor, A11918574, A11917574
