Product Description
Tips: Due to the wide variety of air compressor kits, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
Gardner Denver KIT MIN PRESS VLV2118775 is an accessory kit designed for Gardner Denver air compressors to improve the efficiency and stability of compressed air systems. Gardner Denver KIT MIN PRESS VLV includes a variety of key components such as pressure regulating valves, filters and seals to ensure that compressed air remains clean and stable during delivery. 2118775 is designed in accordance with international standards and is suitable for a variety of industrial environments, including highly corrosive, high humidity and high dust environments.

Product Advantage
1. High efficiency and energy saving: Gardner Denver KIT MIN PRESS VLV2118775 adopts advanced pressure regulation technology to ensure that compressed air maintains efficient operation during delivery and reduces energy waste.
2. Low noise operation: The 2118775 design optimizes the noise level of the compressed air system to ensure a quiet operating environment in industrial environments.
3. Long life: The material and design of Gardner Denver KIT MIN PRESS VLV ensure its stability and durability in long-term use, reducing the frequency of replacement.
4. Easy maintenance: The structural design of 2118775 is easy to disassemble and maintain, reducing the maintenance cost of users.
5. Environmental protection: The design of Gardner Denver KIT MIN PRESS VLV meets environmental protection standards, which helps to reduce carbon emissions and resource waste.

Technical Parameters
|
Parameter |
Description |
|
Product Model |
2118775 |
|
Type |
KIT MIN PRESS VLV |
|
Temperature Range |
-20°C to 120°C (-4°F to 248°F) |
|
Material |
Stainless Steel (AISI 304)/Nitrile (NBR) |

Product Uses
1. Food packaging production line
Gardner Denver KIT MIN PRESS VLV2118775 ensures that automatic filling machines maintain stable pressure (4-6 bar) during conveyor start-up/low load cycles. Prevents oil foaming and contamination of packaged foods (e.g. dairy products, beverages), ensuring compliance with FDA hygiene standards.
2. Plastic injection molding
During mold changeover, Gardner Denver KIT MIN PRESS VLV maintains constant lubrication pressure in hydraulic clamping systems. Reduces micro-leaks that cause oil to enter the air line, avoiding defects in automotive/consumer plastic parts.
3. Medicine bottle sterilization
2118775 is essential for high-pressure steam compressors in aseptic production lines. Stabilizes pressure during the idling phase, prevents moisture infiltration, and ensures vacuum integrity during the medicine bottle sealing process.
Product Operate Guide
1. Safety Preparation:
Turn off power to the compressor. Thoroughly depressurize the system and drain the lubricating oil from the separator container.
2. Disassemble the valve:
Unscrew the old valve body bolts (torque 25 Nm). Discard the worn seals and clean the mounting surfaces.
3. Seal Lubrication:
Lightly apply silicone grease to the new nitrile rubber (NBR) seals to prevent tearing during installation.
4. Assembly:
Insert the spring first into the valve hole. Tighten the valve body bolts by hand and tighten to final torque (25 Nm).
5. Test:
Run the compressor at idle speed. Verify that the pressure is stable at 4-6 bar (58-87 PSI) via the control panel.

Hot Tags: gardner denver kit min press vlv2118775, China gardner denver kit min press vlv2118775 manufacturers, suppliers, Gardner Denver repair kit inlet valve, 2118775, 302SSU6013, Gardner Denver KIT MIN PRESS VLV, 2116854, ZS1084065
