54672654 Spin‑On Coolant Oil Filter For Ingersoll‑Rand Screw Compressor

54672654 Spin‑On Coolant Oil Filter For Ingersoll‑Rand Screw Compressor
Details:
Product name: Oil filter
Part number:54672654
Type: Oil filter
Material:glass fiber
Place of origin:Shaanxi, China
Warranty:1 Year
Send Inquiry
Description
Send Inquiry

Product Overview

 

Part number 54672654 is aftermarket replacement spin‑on coolant / oil filter for matched Ingersoll‑Rand rotary screw air compressors.

 

Critical technical clarification: This spin‑on coolant oil filter cleans circulating lubricant only inside oil‑circuit. It captures metal wear‑particles, carbon‑sludge and solid contaminants to protect rotor and bearing assembly. It DOES NOT remove oil‑mist from compressed‑air stream; oil‑mist separation task belongs to oil‑separator cartridge.

 

Built‑in mechanical bypass‑valve integrated inside filter canister, opening pressure approx 2.5 bar differential‑pressure. When filter element is heavily clogged and differential‑pressure rises above this threshold, bypass‑valve will open. Once bypass activates, unfiltered lubricant flows directly through to air‑end. This creates high risk of rotor and bearing abrasive wear. Monitoring oil‑filter differential‑pressure is essential maintenance action for Ingersoll‑Rand screw compressors.

 

Important fit‑note: Even with identical part‑number 54672654, minor internal revision variants may exist. Part‑number alone cannot guarantee perfect fitment. Please submit full Ingersoll‑Rand compressor serial‑number and clear photo of old oil‑filter name‑plate label for our pre‑order cross‑verification.

 

Common field‑failure reminder: Symptoms such as unstable oil‑pressure, abnormal air‑end noise or premature component wear do not automatically mean defective oil‑filter. Perform inspection workflow: check lubricant oil quality first, then read filter differential‑pressure value to confirm whether bypass‑valve has been triggered, before judging filter failure.

 

Installation reminder: After gasket contacts filter‑head surface, hand‑tighten filter then turn additional ½ turn. Do NOT apply wrench for over‑torque tightening. Excessive torque will damage mounting‑thread or sealing‑face and result in persistent oil‑leakage.

 

Service‑life reminder: Reference service‑life 1800‑2800 running‑hours applies only for clean indoor well‑maintained site. Differential‑pressure reading shall be taken as primary replacement trigger, not fixed runtime hours. Shorten service interval under heavy‑dust / degraded‑lubricant working‑site.

 

Critical buying alert: Only referencing part‑number "54672654" creates fit‑risk. Submit compressor serial‑number and old‑filter photo for compatibility validation to avoid costly on‑site downtime.

 

 

Customer Buying & Maintenance Priorities

 

Maintenance technicians sourcing Ingersoll‑Rand spin‑on oil filter focus on practical real‑site considerations beyond unit price:

1. Component‑function awareness: Oil filter cleans circulating lubricant inside oil‑circuit only; it cannot handle compressed‑air oil‑mist; oil‑separator is responsible for compressed‑air side.

2. Bypass‑valve risk awareness: Built‑in bypass‑valve opens at ~2.5 bar differential‑pressure, unfiltered oil flows to air‑end and brings bearing wear risk; differential‑pressure monitoring is key maintenance point.

3. Fit‑validation risk: Same part‑number may carry minor internal revision variants; compressor serial‑number plus old‑filter label photo required for pre‑order validation.

4. Fault‑diagnosis workflow: Unstable oil‑pressure / abnormal air‑end wear, first inspect lubricant quality and filter differential‑pressure status, do not directly replace oil‑filter.

5. Installation‑operation awareness: Hand‑tighten + ½ additional turn; wrench over‑torque will damage thread and sealing‑surface, cause persistent oil leakage.

6. Maintenance‑cycle awareness: Replace filter when differential‑pressure exceeds threshold, regardless of running‑hours; shorten service interval under heavy‑dust / poor‑oil‑quality environment.

7. Warranty‑scope clarity: Limited‑warranty only covers manufacturing‑related material & structural defects. Damage caused by contaminated lubricant, bypass‑valve activation due to heavy‑dirt load, over‑torque installation are excluded. On‑site service labor is not covered.

8. Project‑order support: For compressor service fleets; export‑grade shock‑proof packing available.

 

 

Compatibility & Pre‑Order Verification Checklist

 

 

Reference OEM Part‑No:54672654

Product Type:Aftermarket Replacement Spin‑On Coolant Oil Filter (lubricant circuit filter with integrated bypass‑valve)

Reference applicable compressor:Matched Ingersoll‑Rand rotary screw compressors originally specifying PN 54672654

 

Information we require before quotation:

1. Full Ingersoll‑Rand compressor serial‑number from machine name‑plate

2. Clear photo of old oil‑filter label

3. Brief description of working‑site environment: normal‑indoor / heavy‑dust / 24‑h continuous‑run

4. Order‑type: Single maintenance spare‑part / bulk stock‑up for service fleet

 

Order‑decision reference

‑ Suitable: Your Ingersoll‑Rand screw compressor originally specifies spare‑part number 54672654.

‑ Need further re‑evaluation: Machine has heavy sludge‑contamination history inside oil‑circuit.

 

Core Functional Benefits

 

1. Protection for screw air‑end bearing & rotor assembly

High‑efficiency 10‑15 μm filter media captures metal wear‑debris, carbon‑sludge and solid contaminants inside lubricant circuit, reduce abrasive wear risk for rotor and bearing components, extend air‑end service life.

2. Integrated calibrated bypass‑valve safety mechanism

Built‑in bypass‑valve (opening pressure ~2.5 bar) provides emergency oil‑flow guarantee under extreme clogged‑condition. Maintenance staff must monitor differential‑pressure to avoid long‑time bypass‑valve opening status which will bypass filtration protection.

3. Spin‑on screw‑in cartridge for field‑service convenience

Standard spin‑on installation structure for Ingersoll‑Rand compressor filter head. Correct installation procedure: hand‑tighten until gasket seats then add ½ turn, no wrench over‑tightening required.

4. Robust canister & high‑temp resistant sealing gasket construction

Pressure‑resistant filter canister, high‑temperature resistant sealing gasket, adapted for typical compressor‑room temperature fluctuation.

 

Technical Specification

 

Parameter Value
Reference Part Number 54672654
Product Type Spin‑on coolant / oil filter with integrated bypass‑valve
Filtration accuracy 10‑15 μm (lubricant‑circuit application)
Bypass‑valve opening pressure Approx. 2.5 bar differential‑pressure
Operating Temperature -20 ℃ ~ 80 ℃
Initial pressure drop ≤0.15 bar @7.5 bar working condition
Max working pressure 16 bar
Reference service interval 1800‑2800 running‑hours (clean‑indoor reference only; differential‑pressure is primary replacement trigger)
Important Remark For lubricant oil‑circuit only, NOT for compressed‑air oil‑mist removal; built‑in bypass‑valve; hand‑tighten + ½ turn installation, wrench over‑torque forbidden
MOQ 1 Unit
Shipment Option Sea‑freight with shock‑proof export packing, air‑freight
Payment Terms T/T, PayPal, Western Union
Important Warranty Note Damage from contaminated oil, heavy‑dirt‑induced bypass activation, over‑torque installation excluded from warranty; on‑site labor not covered

 

Good Customers Reviews

 

product-805-764            product-670-647            product-685-632

 

Supply Certainty

 

Lead time & MOQ:

•MOQ: 1 piece (sample/urgent replacement orders accepted)

•Regular stock items: dispatch within 3–5 working days

•Custom or non-stock configurations: confirmed at inquiry with a written date, not an estimate

 

Risk Of Mis‑Application & Wrong‑Selection

 

Ordering spin‑on oil filter purely by part‑number 54672654 brings hidden operational risks:

 

1. Mis‑understand component function: Expect oil‑filter to eliminate oil‑mist from compressed‑air; oil‑mist separation function belongs to oil‑separator, oil‑filter only cleans circulating lubricant inside oil‑circuit.

2. Ignore internal‑revision difference: Only rely on part‑number without compressor serial‑number cross‑check, risk of minor fit‑mismatch.

3. Wrong installation operation: Use wrench to apply heavy torque for tightening; thread / sealing‑face damaged and permanent oil‑leakage occurs.

4. Ignore bypass‑valve risk: Only follow 1800‑2800‑hour timer, never monitor differential‑pressure; filter fully clogged and bypass‑valve opens for long period, unfiltered oil damages expensive air‑end bearing and rotor.

5. Mis‑judge filter failure: Abnormal oil‑pressure or air‑end wear appears, replace filter directly without checking lubricant‑oil quality and differential‑pressure status, root‑cause problem remains unsolved.


Cost insight: Spin‑on oil filter is low‑cost but mission‑critical spare‑part for screw compressor. Correct function understanding, differential‑pressure monitoring and standard installation procedure are equally important as filter hardware quality. Bypass‑valve long‑term opening will lead to very expensive air‑end overhaul loss.

 

Typical Application Scenarios

 

This 54672654 aftermarket spin‑on coolant oil filter is for routine maintenance & breakdown‑repair of matched Ingersoll‑Rand rotary screw compressors:

‑ Factory‑site compressor periodic maintenance

‑ Compressor service & rental‑fleet spare‑parts stocking

‑ General‑industry compressed‑air‑station overhaul

 

※Reminder: This filter only purifies circulating lubricant inside oil‑circuit. It cannot remove oil‑aerosol from compressed‑air output.

 

Critical On‑Site Installation & Replacement Guidance

 

Safety Warning: Perform full LOTO lock‑out‑tag‑out procedure. Shut‑down compressor, fully depressurize oil‑circuit and wait for adequate cooling before filter disassembly, avoid hot‑oil scald‑injury.

 

1. Pre‑replacement preparation

Shut‑down and cool‑down compressor. Prepare new filter, apply thin layer of compatible compressor lubricant onto new filter sealing‑gasket surface. Inspect filter‑head mounting seat surface, clean old gasket‑residue completely.

2. Remove old spin‑on oil filter

Unscrew old oil‑filter, catch residual hot‑oil. Check old filter for heavy sludge / debris accumulation, judge oil‑circuit contamination level.

3. Mount new 54672654 spin‑on oil filter

Screw new filter manually by hand until sealing‑gasket fully contacts filter‑head metal surface. Then rotate additional ½ turn by hand. DO NOT use wrench for further tightening.

4. Post‑assembly commissioning & leak‑check

Start compressor, run under normal working‑condition. Observe filter‑gasket joint carefully for oil‑leakage. If leakage appears, re‑check gasket seating condition, do not over‑tighten.

5. Differential‑pressure baseline recording

Record initial differential‑pressure reading after commissioning. Monitor this value in daily maintenance; replace filter immediately once differential‑pressure reaches bypass opening threshold.

6. Troubleshooting hint after replacement

If compressor still shows unstable oil‑pressure or abnormal air‑end noise after installing new filter:

Do NOT judge new filter defective directly. Re‑inspect lubricant‑oil quality and filter differential‑pressure reading. Many abnormal phenomena root in contaminated oil‑circuit instead of filter hardware itself.

 

Spare‑Part Planning Guidance

 

For factory‑maintenance‑teams and compressor‑service‑contractors:

 

1. Single maintenance spare‑part: Express shipment for on‑site overhaul repair.

2. Service‑fleet bulk‑stock‑up: Shock‑proof export‑grade packing.

 

Inventory suggestion: Keep this oil filter as routine spare‑part for 24‑h continuous‑running matched Ingersoll‑Rand screw compressors; prioritize differential‑pressure monitoring instead of only following running‑hour counter.

 

Frequently Asked Questions

 

Q1: Will 54672654 oil filter remove oil mist from my compressed‑air output?

A: No. This spin‑on coolant oil filter cleans lubricant circulating inside oil‑circuit. Oil‑mist removal for compressed‑air is completed by oil‑separator cartridge.

Q2: Can I use wrench to tighten this spin‑on oil filter?

A: Not recommended. Hand‑tighten until gasket seats then add extra ½ turn. Wrench over‑torque will damage mounting thread and sealing‑face and cause persistent oil‑leakage.

Q3: Shall I replace filter strictly at 1800‑2800 running‑hours?

A: 1800‑2800‑hours is reference value for clean‑indoor workshop. Replace immediately when differential‑pressure approaches bypass opening threshold regardless of runtime. Shorten maintenance cycle under heavy‑dust site‑condition.

Q4: What risk will happen if filter is fully clogged?

A: Built‑in bypass‑valve will open at approx 2.5 bar differential‑pressure. Un‑filtered lubricant flows directly into air‑end, brings rotor and bearing abrasive‑wear risk, may lead to expensive air‑end overhaul. Monitoring differential‑pressure is critical.

Q5: Compressor still has unstable oil‑pressure after changing new oil‑filter, is new filter defective?

A: Not necessarily. Please check lubricant‑oil quality and filter differential‑pressure reading first. Many issues root in contaminated oil‑circuit, not filter hardware itself.

Q6: Which Ingersoll‑Rand compressor series does 54672654 fit?

A: Reference fit for matched Ingersoll‑Rand rotary screw compressors originally specifying PN 54672654. Please provide compressor serial‑number plus old‑filter photo for cross‑verification for internal revision variants.

Q7: What damage situation will be excluded under product limited‑warranty?

A: Limited‑product‑warranty only covers manufacturing‑related material & structural defects. Damage caused by contaminated lubricant, heavy‑dirt‑induced bypass‑valve activation, over‑torque installation are excluded. On‑site labor cost is not covered.

 

Request Technical Quotation for 54672654 Spin‑On Coolant Oil Filter

Fill inquiry‑form with compressor serial‑number, old‑filter photo‑reference, site‑environment note, quantity and destination‑country. Our sales‑engineer will reply quotation and lead‑time promptly.

Hot Tags: 54672654 Spin‑On Coolant Oil Filter For Ingersoll‑Rand Screw Compressor, China 54672654 Spin‑On Coolant Oil Filter For Ingersoll‑Rand Screw Compressor manufacturers, suppliers, ingersoll rand oil filter, ingersoll rand 54672654, ingersoll rand 39911615, ingersoll rand 23424922, Sullair oil filter replacement, 23424922

Send Inquiry