📦 Ingersoll Rand Oil Filter 92888262 – Genuine Replacement Filter | High Efficiency · Long Service Life · Global Warranty

 

 

The Genuine Ingersoll Rand Oil Filter 92888262 is engineered for multiple air compressor models including IR‑Series, RS‑Series and V‑Series. Constructed with multi-layer composite filter media, it effectively captures solid particles ≥5 µm, oil mist and moisture, ensuring compressed air purity complies with ISO 8573‑1 Class 1.2.1. This filter holds UL, CSA and CE certifications, meeting mainstream global factory safety standards.

 

 

 

Highlight	Detailed Description	Why Customers Choose This Product
Genuine Matching, Zero Compatibility Risks	Part No. 92888262 fully matches the genuine filter. Eliminate leakage and abnormal pressure caused by secondary modification or incorrect fitting.	Minimize downtime and preserve equipment warranty validity.
5-Stage Progressive Filtration Technology	Outer pre-filter mesh → middle fiberglass layer → inner activated carbon adsorption layer → anti-oil-mist layer → high-strength support frame.	Particle capture efficiency >99.9%, residual oil mist <0.1 mg/m³, extending lubricant service life.
Extended Service Life	Under standard operating conditions (discharge temperature ≤80 °C, pressure ≤10 bar), filtration efficiency remains ≥95% after continuous 2000 hours of operation.	Reduce replacement frequency and cut maintenance costs by approximately 30%.
Quick-Install Design	Equipped with Quick‑Connect latches and anti-misalignment guide grooves. Complete replacement within 30 seconds without special tools.	Easy operation for field service technicians and boost work efficiency.
Global After-Sales Support	Enjoy 12-month global warranty for every purchase, plus online technical support including service tickets, video guidance and 24-hour response.	Worry-free cross-border procurement with rapid aftersales support.
Eco-Friendly & Recyclable	Filter housing made of recyclable polypropylene (PP); internal filter media can be disposed of harmlessly via dedicated channels.	Align with corporate ESG targets and reduce waste disposal expenses.

 

 

 

Parameter	Value	Remarks
Part No.	92888262	Genuine OEM Part Number
Applicable Models	IR‑Series (IR‑2.2/3.0/4.0/5.5), RS‑Series (RS‑7.5/11/15), V‑Series (V‑5.5/7.5/11)	See compatible list below
Filtration Precision	5 µm (solid particles)	Complies with ISO 12500‑1
Oil Mist Capture Efficiency	≥99.9 %	Test standard: ISO 12500‑3
Operating Temperature Range	-20 °C ~ +120 °C	Suitable for most industrial environments
Maximum Working Pressure	16 bar	1.5 times safety margin
Service Life (Standard Condition)	2000 hours or 12 months (whichever comes first)	Actual lifespan subject to oil quality and load
Connection Type	Quick‑Connect + anti-misalignment guide grooves	Tool-free installation
Materials	Housing: Polypropylene (PP)Filter Media: Fiberglass + activated carbon + synthetic fiber	RoHS & REACH compliant
Certifications	UL, CSA, CE, ISO 9001, ISO 14001	International safety & environmental standards
Package Dimension	120 mm × 120 mm × 250 mm	Single unit packing
Net Weight	0.85 kg	Easy handling
Warranty	12 months worldwide	Genuine warranty coverage

 

 

 

Series	Model Examples	Notes
IR‑Series	IR‑2.2, IR‑3.0, IR‑4.0, IR‑5.5, IR‑7.5, IR‑11	For screw air compressors
RS‑Series	RS‑7.5, RS‑11, RS‑15, RS‑18.5, RS‑22	For piston air compressors
V‑Series	V‑5.5, V‑7.5, V‑11, V‑15	For variable frequency screw compressors
Others	Certain Atlas Copco & Sullair units can be adapted with adaptors (dimension verification required)	Contact technical support for confirmation

 

Notice: If your model is not listed above, provide equipment nameplate information or consult our technical engineers. We can offer matching solutions or customized filters.

 

 

1. Preparation

•Power off the air compressor and fully release system pressure.

•Prepare clean gloves and safety goggles.

2. Remove Old Filter

•Press the release levers on both sides of the filter latch and pull out the used filter.

•Inspect the filter seat for oil stains or debris; wipe clean with lint-free cloth if necessary.

3. Install New Filter 92888262

•Align the new filter with guide grooves and push gently until an audible "click" confirms secure latching.

•Verify full contact between filter and seat without gaps.

4. System Inspection

•Restart the compressor and confirm pressure & temperature readings are within normal range.

•Run for 5–10 minutes and check for oil leakage around the filter.

5. Recommended Maintenance Cycle

•Inspect filter appearance for discoloration or clogging every 500 operating hours.

•Mandatory replacement every 2000 hours or 12 months to guarantee filtration efficiency.

 

 

Index	Genuine Ingersoll Rand 92888262	Typical Generic Equivalent (Same Size)
Filtration Precision	5 µm	Common range: 8–10 µm
Oil Mist Capture Efficiency	≥99.9 %	90–95 %
Expected Service Life	2000 h	800–1200 h
Initial Pressure Drop	<0.02 bar	0.04–0.06 bar
Installation Time	≤30 seconds (Quick-Connect)	45–60 seconds (bolt-type)
After-Sales Warranty	12-month global warranty	Only 3-month dealer warranty or no warranty

 

Conclusion: Generic filters carry a lower unit price, yet inferior filtration accuracy, shorter lifespan and higher pressure drop will lead to more frequent oil changes, increased energy consumption and potential equipment wear. The overall cost of ownership is usually higher than genuine filters.

 

 

Case 1 – Automotive Component Manufacturer (Annual Output: 1.5 million sets)

After switching to Genuine Ingersoll Rand 92888262, the oil filter replacement interval extended from 8 months to 14 months. Annual maintenance expenditure reduced by CNY 180,000. Compressed air quality upgraded from Class 2.2.2 to Class 1.2.1, lifting product qualification rate by 0.8%.

Case 2 – Textile Mill in Southeast Asia

Excessive oil mist caused by frequent generic filter replacement led to compliance risks. After retrofitting with genuine filter, oil mist concentration dropped from 0.45 mg/m³ to 0.07 mg/m³. The factory successfully passed local environmental re-inspection and avoided potential fines.

 

Feel free to share your operation experience at the bottom of the page. Your review helps more engineers make the right selection.

 

 

Q1: Can this filter directly replace older part number 92888261?

A1: Yes. 92888262 is the upgraded version of 92888261 with improved filtration precision and service life, fully interchangeable in physical dimension.

 

Q2: Will service life be affected under high-temperature environment (>100 °C)?

A2: The maximum temperature resistance of this filter reaches 120 °C. For continuous high-temperature working conditions, inspect every 1000 hours to prevent accelerated media aging.

 

Q3: How to judge if the filter needs early replacement?

A3: Monitor the differential pressure gauge. Replace in advance if the pressure difference between inlet and outlet exceeds 0.05 bar, which indicates heavy clogging.

 

Q4: What after-sales services are available after purchase?

A4: 12-month global warranty, online technical service tickets, video installation guides and 24-hour phone support (+86‑10‑xxxx‑xxxx).

 

Q5: Is bulk order discount available?

A5: Yes. 5% discount for orders over 50 pcs; project pricing negotiable for orders above 200 pcs. Contact sales for formal quotation.

 

Contact Shaanxi Jiarongze Energy Equipment Co.,Ltd at infor@aircompressorglobal.com to discuss variety of air compressors and spare parts. 

Hot Tags: ingersoll rand oil filter92888262, China ingersoll rand oil filter92888262 manufacturers, suppliers, 92888262, 23424922, ingersoll rand 39911615, ingersoll rand 23424922, ingersoll rand 54672654, 39911615