Product Overview
Part number 250034‑085 (cross‑reference numbers:249494,409267,OS5136,P59A851,P060547) is built‑in flange‑mount coalescing oil‑separator element for matched Sullair LS20E, LS20S 125‑150 HP oil‑injected rotary screw compressors (including Sullube and Leak‑free variants). Installed inside air‑oil separation tank, it captures sub‑micron oil mist after primary centrifugal separation, lowers residual oil content of compressed‑air output and reduces frequent lubricant top‑up work.
Critical common‑field failure note: Many technicians install brand‑new 250034‑085 separator yet still face persistent oil‑carry‑over. In most instances the separator itself is not defective. The tiny internal siphon scavenge tube / built‑in strainer gets clogged by carbon‑sludge and oil sediment. Separated oil cannot flow back to oil sump and gets re‑entrained into compressed‑air streamMade-in-Ch.... This inspection step is frequently skipped during routine maintenance.
Important maintenance warning: This separator element cannot be blow‑cleaned for repeated reuse. Compressed‑air blasting creates invisible micro‑tears inside fine glass‑fiber coalescing media. Damaged media leads to permanent oil‑mist bypass risk. Full cartridge replacement is required once differential‑pressure hits alarm threshold.
Many maintenance teams only follow running‑hour counter for replacement. 3500‑6000 operating‑hour rating is only reference benchmark under clean, temperature‑controlled indoor workshop. Under dusty production environment, high‑humidity or heavy‑load continuous operation, filter media will saturate far ahead of reference runtime. Separator differential‑pressure reading is primary replacement trigger instead of runtime counter only. Delayed replacement will raise oil consumption, destroy downstream dryer/filter consumables, and increase overall operational cost.
Critical buying alert: Part‑number 250034‑085 alone cannot guarantee perfect fitment. Different hardware revision of LS20E / LS20S may bring minor difference on flange geometry, scavenge‑tube mating dimension. Always submit full compressor serial‑number plus photo of old‑separator name‑plate for our technical cross‑verification before placing your order, avoid wrong‑part shipment and costly production downtime.
Safety note for Sullair LS‑series: Built‑in oil‑separator design relies on anti‑static electrical continuity between separator element, gasket and separator tank. Loss of conductive grounding creates static‑discharge spark hazard inside oil‑mist‑filled pressure vessel. Improper substitute element or mis‑installation brings hidden fire‑safety risk.
Customer Buying & Maintenance Priorities
Industrial buyers evaluating Sullair LS‑series oil‑separator do not make decisions based purely on unit price. These are core concerns we fully address on this page:
1. Fitment accuracy: Avoid wrong‑part delivery, production halt and extra return‑shipping expense; serial‑number cross‑validation is mandatory.
2. Anti‑static safety performance: Maintain required electrical continuity for oil‑mist static‑spark prevention inside pressure tank.
3. Real‑world oil‑mist holding capacity: Inferior media saturates quickly, causes early oil‑carry‑over and accelerates downstream filter wear.
4. Gasket sealing reliability: Aged / poor‑quality gasket creates invisible bypass gap leading to oil‑leakage or internal oil‑mist bypass.
5. Replacement judgment criteria: Understand differential‑pressure alarm limits, do not blindly follow fixed running‑hour schedule.
6. Installation safety pitfalls: Anti‑static continuity check, discard old gasket, diagonal‑cross bolt‑torque sequence, scavenge‑tube depth & strainer cleaning.
7. Troubleshooting knowledge: Diagnose oil‑carry‑over even after fitting brand‑new separator.
8. Bulk‑supply stability: For compressor‑service contractors and large manufacturing plants, consistent batch‑quality and predictable lead‑time for stocking spare‑parts.
9. Technical backup: Professional support when you face oil‑carry‑over, high differential‑pressure and spare‑part‑matching confusion.
Compatibility & Pre‑Order Verification Checklist
OEM Part Number:250034‑085 Cross‑reference part‑numbers: 249494, 409267, OS5136, P59A851, P060547 Product Type: Built‑in flange‑mount coalescing oil‑separator element Applicable Compressor: Sullair LS20E, LS20S 125‑150‑HP screw compressor (Sullube / Leak‑free version)
Information we require before quotation:
1. Full compressor serial‑number (from machine name‑plate)
2. Clear photo of original old‑separator name‑plate
3. Confirm compressor configuration: Sullube or standard lubricant version
4. Working‑site environment: indoor / dusty / 24‑hours continuous‑running
5. Order requirement: single emergency spare / monthly / annual bulk‑stock
Service‑life Reference Guidance
‑ Clean indoor low‑dust workshop: 3500‑6000 operating hours (reference value only)
‑ Dusty / high‑humidity / heavy‑load workshop: shorten cycle to 2500‑4000 hours
‑ Mandatory replacement condition: Separator differential‑pressure reaches OEM alarm threshold, regardless of accumulated running‑hours.
Note: If compressor previously suffered heavy carbon‑sludge contamination, shorten inspection cycle even after installing brand‑new separator.
Core Functional Benefits
1. Stable oil‑mist coalescing performance for compressed‑air quality
Multi‑layer HV‑grade glass‑fiber composite coalescing media traps sub‑micron oil aerosol. Under nominal full‑load condition, properly‑installed 250034‑085 keeps residual oil within 3‑6ppm, protecting painting lines, pneumatic actuators and downstream dryers / inline filters from oil contamination.
2. Control rising differential‑pressure & reduce extra energy cost
Optimized pleated media maintains low initial pressure‑drop. As contaminants and carbon‑sludge accumulate, differential‑pressure increases, compressor consumes extra power. Timely separator‑replacement keeps energy‑consumption within OEM baseline.
3. Anti‑static conductive sealing assembly for tank‑safety
Matched conductive rubber gasket preserves electrical continuity between separator element and metal separator‑tank. This dissipates static charge generated by fast‑moving oil mist, eliminating potential spark‑ignition risk inside pressure vessel. Never reuse old gasket. Old degraded gasket loses elasticity and conductive property, brings both bypass‑leakage and hidden static‑safety hazard.
4. Resistance against carbon‑sludge build‑up in LS‑series oil‑circuit
Media, end‑cap and gasket formulation withstand thermal cycles and normal carbon‑sediment generated inside Sullair LS‑series oil‑gas tank.
5. Drop‑in flange‑mount replacement
Flange dimension, bolt‑hole layout matches OEM tank‑housing, no mechanical modification required during maintenance swap‑out. Highly recommended to inspect and clean siphon scavenge‑tube strainer and synchronously check oil filter & compressor lubricant during separator replacement.
Technical Specification
| Parameter | Value |
|---|---|
| Part Number | 250034‑085 |
| Cross‑reference PN | 249494, 409267, OS5136, P59A851, P060547 |
| Type | Built‑in flange‑mount coalescing oil‑separator element |
| Filter Media | HV‑grade multi‑layer glass‑fiber composite coalescing material |
| Typical residual oil content | 3‑6 ppm (nominal full‑load condition) |
| Initial differential pressure | ≤0.02 MPa |
| Max working temperature | 90°C |
| Reference service life | 3500‑6000 hrs (clean‑indoor reference only) |
| Sealing | Anti‑static conductive rubber gasket (included) |
| Reusability | Single‑use only, cannot blow‑clean for reuse |
| MOQ | 1 Piece |
| Shipment | DHL/FedEx/UPS express, air freight, sea freight |
| Payment Terms | T/T, PayPal, Western Union |
| Important Remark | Maintain anti‑static continuity; inspect siphon scavenge‑tube / strainer on every replacement |
Risk of Low‑Quality Aftermarket Oil‑Separator
Selecting separator purely on low purchase price creates far‑greater long‑term losses for your Sullair LS‑series compressor:
1. Poor‑grade coalescing media: Media saturates quickly, early oil‑carry‑over; downstream dryer and inline filters wear out rapidly, raising spare‑part expense.
2. Non‑conductive / inferior gasket: Loss of anti‑static continuity creates static‑spark hazard; gasket aging causes oil‑mist bypass and external oil‑leakage.
3. Bad dimensional tolerance: Flange mis‑fit, uneven bolt‑stress, hidden bypass gaps.
4. Weak internal support structure: Media collapses under differential‑pressure surge, total loss of coalescing function.
Cost insight: A cheap separator saves little upfront cost. Repairing contaminated downstream equipment or dealing with production rejects caused by oil‑carry‑over costs many multiples of separator price.
Typical Application Scenarios
This 250034‑085 oil‑separator serves industrial facilities operating matched Sullair LS20E / LS20S 125‑150‑HP screw compressors:
‑ General manufacturing & metal‑working workshops
‑ Automotive painting & assembly facilities
‑ Plastic injection & extrusion factories
‑ 24‑hour continuous‑run light‑industry compressed‑air stations
‑ Compressor service & rental companies for planned maintenance stock
Inspect or replace separator element when you observe: high lubricant consumption, oily residue at compressed‑air outlet, separator differential‑pressure approaching OEM alarm threshold. Always inspect siphon scavenge‑tube and strainer during every separator‑maintenance event.
On‑Site Installation & Post‑Replacement Guidance
Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Shut‑down compressor completely, fully release tank‑internal pressure and wait sufficient cooling before opening separator‑tank cover. Hot lubricant can cause severe burn injury. Verify anti‑static electrical continuity after finishing installation.
1. Pre‑installation critical inspection (most‑skipped maintenance work)
Power‑off and depressurize compressor. Remove tank cover, take out old separator element.
Mandatory step: Fully inspect and clean internal siphon scavenge‑tube plus built‑in strainer, remove carbon‑sludge blockage. Blocked scavenge‑line is top cause of oil‑carry‑over after separator swap‑out. Check tube insertion depth per Sullair service manual. Completely discard old anti‑static rubber gasket. Clean tank‑flange sealing‑face thoroughly, remove sludge and old‑gasket fragments.
2. Element mounting & flange‑bolt tightening
Place brand‑new 250034‑085 separator element with new conductive gasket onto tank seat. Fit tank‑cover. Tighten flange‑bolts gradually with diagonal‑cross tightening sequence, follow torque‑value requirement from Sullair official service manual. Uneven bolt‑torque creates micro‑gap and oil‑mist bypass leakage.
3. Post‑start‑up commissioning and baseline‑recording Re‑assemble cabinet panels. It is recommended to inspect compressor oil‑filter and lubricant condition synchronously. Run compressor under full‑load for 30‑60 minutes. ‑ Record baseline separator differential‑pressure reading for future‑maintenance reference; ‑ Inspect flange‑joint for oil seepage; ‑ Monitor compressed‑air oil‑carry‑over status.
4. Troubleshooting hint after replacement If oil‑carry‑over fault still exists with brand‑new separator fitted: Do NOT judge separator defective directly. Re‑check scavenge‑tube / strainer cleanliness, gasket condition, compressor oil‑filling‑level and minimum‑pressure‑valve working performance.
Spare‑Part Planning & Bulk‑Procurement Guidance
For factory maintenance‑teams and compressor‑service contractors, we support customized stocking‑solutions for 250034‑085 oil‑separator:
1. Emergency single‑order: Fast express shipment for sudden breakdown to cut production‑downtime.
2. Quarterly / annual maintenance bulk‑order: Better unit price and stable lead‑time for planned preventive‑maintenance.
3. Combined‑maintenance‑kit: Bundle together with matched air‑filter, oil‑filter for LS‑series compressors, lower per‑item shipping‑cost.
4. Reserved stock program: Reserve inventory for regular‑customers against market supply‑fluctuation.
5. Pre‑shipment inspection: Visual check for media integrity, gasket conductive‑property, flange flatness; bulk‑order inspection photos / videos available upon request.
Inventory suggestion: Keep minimum 1‑2 spare separators onsite for critical 24‑hour‑running Sullair LS‑series compressors, avoid production loss waiting for international shipment.
Frequently Asked Questions
Q1: I fitted brand‑new 250034‑085 separator, but Sullair LS‑series compressor still blows oil mist. What is top cause?
A: Very frequent root‑cause is blocked internal siphon scavenge‑tube or built‑in strainer. Separated lubricant cannot flow back to oil sump. Clean scavenge‑passage before mounting new separator element. Also check oil‑level and minimum‑pressure‑valve status.
Q2: Shall I strictly replace separator exactly at 3500‑6000 running‑hours?
A: 3500‑6000‑hour rating is reference value for clean‑indoor environment. Dusty or high‑humidity workshop shortens practical service‑life. Separator differential‑pressure alarm‑threshold has higher priority than runtime counter.
Q3: Can I blow‑clean used 250034‑085 separator element with compressed‑air for reuse?
A: Not permitted. Air‑blowing generates invisible micro‑tears on glass‑fiber coalescing media. Damaged media leads to hidden oil‑mist bypass risk. This element is designed for single‑use full‑replacement only.
Q4: Does part‑number 250034‑085 fit every Sullair LS‑series compressor?
A: It is dedicated for LS20E / LS20S 125‑150‑HP (Sullube / Leak‑free). Different hardware revisions may require different spare‑parts. Submit compressor serial‑number for compatibility cross‑check before ordering.
Q5: What risk will happen if I reuse old separator gasket?
A: Old gasket loses elasticity and anti‑static conductive property after long‑time hot‑oil exposure. It creates two major risks: ① invisible oil‑mist bypass / external oil‑leakage; ② loss of static‑electric‑dissipation, potential spark‑ignition hazard in oil‑mist‑filled pressure tank. Always install brand‑new matching conductive gasket.
Q6: After separator replacement compressor shows high differential‑pressure immediately, is separator defective?
A: Not necessarily. Please check for heavy carbon‑sludge contamination inside oil‑circuit, degraded lubricant oil, or clogged scavenge‑strainer. Severe pre‑existing system contamination will quickly load‑up brand‑new separator media.
Why Source 250034‑085 Separator Element From Us
‑ Pre‑order compatibility check: Send compressor serial‑number and old‑separator photo; our technical‑team double‑verify fitment before shipment to avoid wrong‑part delivery.
‑ Pre‑shipment visual inspection: Check coalescing‑media integrity, flange flatness and anti‑static gasket condition; inspection photos / videos available for bulk‑orders.
‑ Flexible global‑logistics: Urgent express for emergency breakdown‑maintenance; sea‑freight solution for bulk‑project procurement.
‑ Technical‑reference support: If you encounter oil‑carry‑over or maintenance confusion, share compressor‑name‑plate information and we provide spare‑part reference guidance.
Hot Tags: 250034‑085 Oil Separator | Sullair LS20E LS20S Screw Compressor, China 250034‑085 Oil Separator | Sullair LS20E LS20S Screw Compressor manufacturers, suppliers, Sullair oil Separator replacement, 250034 116, Sullair 250034 087, sullair 250034 112, sullair oil separator, sullair air oil separator
