Product Introduction

The Sullair oil Separator Replacement250034 124 is a high quality filter element designed for select Sullair air compressor models. Its primary function is to remove residual oil from the compressed air stream after the compression process is complete. This oil separator element features an advanced multi-layer synthetic media that captures microscopic oil particles, ensuring only pure air enters your pneumatic system from the compressor.

Product Advantage

1. Enhanced contaminant removal
In addition to oil, the Sullair oil Separator Replacement250034 124 removes other contaminants such as particles and water droplets, ensuring that the compressed air is as clean as possible for sensitive applications.
2. Improved air quality
Ensures the highest quality compressed air by effectively removing oil and impurities, preventing contamination in industries such as food processing, pharmaceuticals and electronics.
3. Compact design, saves space
Sullair oil Separator Replacement250034 124 takes up less space, making it ideal for use in confined areas with limited space without compromising performance or efficiency.
4. Environmental protection
By keeping the air oil-free, the Sullair oil Separator Replacement250034 124 helps reduce the risk of environmental pollution, especially in industries that need to strictly comply with environmental regulations.
5. Enhanced flow capacity
Designed to handle higher air volumes, it ensures effective oil separation even in large-scale industrial operations with demanding airflow requirements.

Technical Parameters

Part number	250034 124
Product name	Oil separator
Material	Steel
Operating temperature	-10°C to 80°C (14°F to 176°F)
Service Life	4,000 - 6,000 operating hours
Compatible Models	Sullair Air Compressors
MOQ	1 pcs
Place of origin	Shaanxi, China
Warranty	1 Year

Product Uses

1. Construction and heavy machinery
Sullair oil Separator Replacement250034 124 can power compressors for tools and equipment used in construction, road construction and heavy machinery operations.
2. Electronics and semiconductor manufacturing
In compressors installed in clean room environments where precision electronics and semiconductor components are assembled.
3. Marine and shipping industries
Onboard compressors used in offshore vessels to provide air for control systems and tools.
4. Wastewater treatment plants
Air compressors used to power aeration systems and other equipment in water treatment facilities.

Product Operate Guide

1. Shut Down the Compressor
Make sure the air compressor is completely shut down and depressurized. Disconnect the power supply to avoid electrical hazards.
2. Locate the Oil Separator
Determine where the oil separator is located in the compressor system. Refer to the compressor owner's manual for detailed location instructions.
3. Remove the Old Separator
Carefully remove the old oil separator from the compressor unit. Depending on your system, this may require unscrewing or loosening the snaps on the old part.
4. Prepare the Replacement Separator
Carefully unpack the Sullair oil Separator Replacement250034 124. Inspect the unit for any visible damage before proceeding.
5. Install the New Separator
Place the new oil separator in the designated compartment. Make sure it is properly aligned with the mounting points. Tighten any screws or fasteners to secure the separator in place.
6. Reconnect the System
After installing the separator, reconnect any hoses or pipes that were removed during the replacement process. Make sure all connections are tightly sealed.
7. Check for leaks
Before starting the compressor, check for air or oil leaks around the newly installed separator. Tighten any loose connections if necessary.
8. Start the compressor
After the separator is securely installed and all connections have been checked, start the compressor. Monitor the system to ensure that the oil separator is functioning properly.