Heated Air Dryer For Compressed Air System 80m3/min

Heated Air Dryer For Compressed Air System 80m3/min
Details:
Product Number: JRZ-YDXGL-80
Product Type: Heated Air Dryer for Compressed Air System
Working Pressure:7bar
Exhaust volume:80 m3/min
Motor Power:40KW
Cooling Method:Water Cooled
Payment terms: Paypal, T/T, Western Union, Visa
MOQ: 1Pcs
Customization service: Support customization
Shipping method: Sea/Air
Send Inquiry
Description
Send Inquiry
Tips: Due to the wide variety of air dryer, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
 

Product Description

 

The Heated Air Dryer for Compressed Air System 80m3/min operates with a twin-tower system: one tower adsorbs moisture from incoming wet compressed air, while the other is regenerated using heated ambient air from an external blower. During drying, air flows upward through the desiccant bed (e.g., activated alumina), trapping water vapor. In regeneration, ambient air is heated and blown through the saturated desiccant, releasing moisture before cooling with compressed air. This continuous process prevents downtime and maintains high efficiency without consuming large volumes of purge air. Key components include precision valves, a low-watt density heater, and a PLC control system for automatic switching between towers, ensuring reliability in harsh environments.

 

Product Advantage

 

1.High Reliability

Features robust construction with stainless steel valves and a 10-year heater warranty, ensuring long-term performance and reduced maintenance.

2.Enhanced Air Quality

Achieves a stable dew point of -40°F, protecting downstream equipment from corrosion and contamination in sensitive applications.

3.Smart Control

Integrated PLC and Energy Management System (EMS) allow both fixed-time and demand-based operation, optimizing energy consumption based on real-time air demand.

4.Eco-Friendly Design

Low noise output and energy-efficient operation support sustainable industrial practices, aligning with energy rebate programs like those for dew point control.

 

Technical Parameters

 

Parameter

Unit

Description

Working Pressure

bar

7

Exhaust volume

m3/min

80

Motor power

kw

40

Voltage/frequency

v/Hz

380/50

Cooling Type

/

Water Cooled

Dimension(l*w*h)

mm

2730*1650*2935

 

Product Application

 

1.Painting and Coating Applications
Ensures optimal conditions for spray painting and coating processes, preventing defects and improving finish quality.
2.Petrochemical Industry
Provides dry air for instrumentation, control systems, and process applications in harsh environments.
3.Medical Facilities
Supplies clean, dry air for medical equipment and hospital air systems, ensuring patient safety and equipment reliability.
4.Laboratory Applications
Delivers high-purity dry air for analytical instruments and research applications requiring precise environmental conditions.
5.Telecommunications
Protects sensitive communication equipment from moisture damage in data centers and communication facilities.
 

Product Operate Guide

 

1.Installation

Mount the dryer vertically in a well-ventilated area; connect inlet/outlet pipes to the compressed air system, ensuring pre-filters are installed to protect desiccant beds. Verify electrical connections to the PLC panel (460V three-phase supply).

2.Startup

Power on the system; the PLC will initiate a self-check. Open manual valves gradually to pressurize the online tower. Monitor dew point readings via the EMS; allow 30 minutes for stabilization before full operation.

3.Regular Maintenance

Replace desiccant every 2-3 years or as per performance drops. Clean filters monthly; inspect heater and blower for debris. Use the control panel to switch to "Demand Mode" for energy savings during low-usage periods.

4.Troubleshooting

If dew point rises, check for heater failure or desiccant saturation; if noise increases, inspect blower bearings. For leaks or valve issues, consult the manual and utilize the included free parts replacement service. Always depressurize before any service.

Hot Tags: heated air dryer for compressed air system 80m3/min, China heated air dryer for compressed air system 80m3/min manufacturers, suppliers

Send Inquiry