Heated Air Dryer For Compressed Air System 50m3/min

Heated Air Dryer For Compressed Air System 50m3/min
Details:
Product Number: JRZ-YDXGL-50
Product Type: Heated Air Dryer for Compressed Air System
Working Pressure:7bar
Exhaust volume:50 m3/min
Motor Power:25KW
Cooling Method:Water Cooled
Payment terms: Paypal, T/T, Western Union, Visa
MOQ: 1Pcs
Customization service: Support customization
Shipping method: Sea/Air
Send Inquiry
Description
Send Inquiry
Tips: Due to the wide variety of air dryer, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
 

Product Description

 

The Heated Air Dryer for Compressed Air System 50m3/min delivers ISO Class 2 certified dry air (-40°C pressure dew point) for critical industrial compressed air systems. Utilizing counter-current regeneration technology with external blower-purge , it eliminates moisture contamination while reducing energy consumption by 18% compared to conventional dryers . Certified for CE, ISO, and NEMA 4/IP54 standards .

 

Product Advantage

 

1.Zero Downtime

Bi-Mode operation auto-switches to heatless mode during heater failure

2.Smart Monitoring

DPC controller with LCD displays real-time dew point, tower status, and fault codes

3.Durability

Stainless steel construction, Incoloy-sheathed heaters , and butterfly valves rated for 500k cycles

4.Compliance

SIL2 safety interlocks, explosion-proof option for hazardous areas.

 

Technical Parameters

 

Parameter

Unit

Description

Working Pressure

bar

7

Exhaust volume

m3/min

50

Motor power

kw

25

Voltage/frequency

v/Hz

380/50

Cooling Type

/

Water Cooled

Dimension(l*w*h)

mm

2430*1300*2790

 

Product Application

 

1.Pharmaceuticals & Healthcare
Providing oil-free and dry air for manufacturing processes, sterile packaging, and operating sensitive medical instruments where uncontaminated air is mandatory.
2.Electronics & Electrical Industry
Protecting sensitive production processes, such as chip manufacturing and PCB assembly, from microscopic moisture damage and electrostatic discharge.
3.Energy & Mining
Supplying dry air to air-operated controls in harsh environments, pneumatic machinery, and instrumentation at drilling sites, processing plants, and construction sites.
 

Product Operate Guide

 

1.Installation

Location: Place the Heated Air Dryer for Compressed Air System 50m3/min on a stable, level floor in a well-ventilated area with sufficient space around it for maintenance access. Ensure ambient temperatures are within the specified range (e.g., -20°C to +40°C) .

Piping: Connect the dryer to the compressed air system following the flow direction indicated on the ports. Install isolation valves upstream and downstream. Ensure proper pre-filtration (e.g., coalescing filter) is in place to protect the desiccant from liquid water and oil aerosols .

Electrical: Connect the power supply (380V/3PH/50Hz) to the designated terminals following local electrical codes. Ensure proper grounding.

Blower Vent: Ensure the blower exhaust is routed to a safe location, away from the unit's intake or any hazardous areas.

2.Start-Up

Check all valves are in their correct initial positions.

Slowly open the upstream isolation valve to pressurize the dryer gradually.

Turn on the main power switch. The control system should initialize.

The dryer will typically start automatically based on its programmed cycle. Verify that the towers switch as scheduled after the first full cycle.

Hot Tags: heated air dryer for compressed air system 50m3/min, China heated air dryer for compressed air system 50m3/min manufacturers, suppliers

Send Inquiry