Product Description
The JRZ-V-0.25/8 is a compact and efficient reciprocating air compressor designed to deliver reliable compressed air in locations where only single-phase power is available. With a power rating of 2.2 kW (3 HP) and a voltage of 220V, this unit is an ideal solution for small workshops and light industrial applications.
Featuring a V-Type cylinder configuration, this compressor delivers a displacement of 0.25 m³/min (8.8 CFM) at a standard working pressure of 8 Bar (116 PSI). Its robust cast-iron construction ensures durability, while the balanced V-design minimizes vibration.
Product Advantage
Single-Phase Convenience: The 220V/1 Phase motor allows users to plug the compressor into standard wall sockets found in homes and small shops, eliminating the need for expensive 3-phase wiring.
V-Configuration: The V-shaped cylinder design ensures smooth operation and better balance compared to inline models, reducing wear and extending the machine's life.
Cast Iron Durability: Both the cylinders and the crankcase are made of high-quality cast iron, providing excellent heat dissipation and resistance to wear.
Compact & Portable: The vertical or space-saving V-design makes it easy to fit into tight workshop corners or mount on small portable frames.
Technical Parameters
| MODEL | JRZ-V-0.25/8 |
| Type | Piston Compressor |
| Power | 2.2kw/ 3.0 HP |
|
Working Pressure |
0.8 MPa / 8 Bar / 116 PSI |
| Voltage | 220v |
|
Air Displacement (FAD) |
0.25 m³/min |
|
Warranty |
1 Year |
Product Application
Automotive Garages & Tire Shops: Ideal for tire inflation, impact wrenches for wheel changing, and general vehicle maintenance.
Woodworking & Carpentry: Powers nail guns, staplers, and pneumatic sanders for cabinet making and furniture assembly.
DIY & Home Workshops: A perfect choice for hobbyists and home mechanics using spray guns, airbrushes, or pneumatic tools.
Small Service Stations: Used for cleaning and light maintenance tasks in remote locations where 3-phase power is not installed.
Product Operate Guide
Safety Warning: Always disconnect the power plug before performing maintenance. Do not exceed the maximum working pressure.
1. Installation:
Place the compressor on a flat, stable surface.
Ensure adequate ventilation around the unit to prevent overheating.
Check the engine oil level via the dipstick/sight glass. If low, add ISO VG 46 or 68 compressor oil until it reaches the correct level.
2. First Start-Up (Break-in):
Open the air tank drain valve to allow the compressor to start unloaded.
Plug in the 220V power cord.
Start the compressor and let it run unloaded for 10-15 minutes.
Close the drain valve and let the tank fill to the cut-out pressure (8 Bar), then stop the unit.
3. Regular Operation:
Turn the switch to "ON". The motor will start and pump air.
Monitor the pressure gauge. The motor will stop automatically when it reaches the cut-out pressure (usually around 8 Bar).
The motor will restart automatically when the pressure drops to the cut-in pressure (usually around 5-6 Bar).
4. Maintenance:
Drain the Tank: Open the drain valve at the bottom of the tank daily to release water condensation. This prevents rust.
Check Belts: If belt-driven, check belt tension monthly. It should deflect slightly when pressed.
Clean Air Filter: Clean or replace the intake filter regularly, especially in dusty environments.
Hot Tags: jrz-v-0.25/8 piston compressor 2.2kw 220v 0.25m³/min 0.8mpa air compressor, China jrz-v-0.25/8 piston compressor 2.2kw 220v 0.25m³/min 0.8mpa air compressor manufacturers, suppliers
