Product Overview
Part 28H287 (AEON‑CL) is 5‑gallon PAO / diester synthetic‑blend lubricant, specially formulated for Gardner‑Denver oil‑injected rotary screw compressors. It performs multi‑functions including rotor bearing lubrication, compression‑heat removal, sealing rotor clearances and anti‑corrosion inside compressor oil circuit.
Critical technical warning: Do NOT mix AEON‑CL synthetic lubricant with mineral‑base or semi‑synthetic compressor oil. Mixing different oil chemistries will generate varnish, carbon sludge and sediment inside oil circuit. This will blind oil filter / oil‑separator prematurely and trigger frequent high‑temperature shutdown. Always fully drain old fluid before filling new lubricant.
Many maintenance teams only rely on running‑hour counter to schedule oil replacement. 8000 operating‑hour rating is only valid under clean, low‑humidity, stable‑load ideal workshop environment. In dusty, high‑condensation, heavy‑duty production conditions, oil will degrade far earlier than reference runtime. Laboratory oil analysis is the most authoritative basis to judge whether lubricant needs replacement, not only running‑hours.
Critical buying reminder: Part‑number 28H287 alone cannot guarantee full compatibility. Gardner‑Denver has multiple AEON‑series lubricant grades: AEON‑CL (28H287), AEON‑9000SP (28H109), AEON‑4000 semi‑synthetic. They cannot substitute for each other arbitrarily. Please submit full compressor serial‑number and check original equipment service‑manual for cross‑verification before placing order.
★Important note: This lubricant is designed for oil‑injected rotary screw compressor. It is NOT formulated for reciprocating piston compressor, hydraulic system or heavy‑duty mechanical gearbox application.

Compatibility & Pre‑Order Verification
Manufacturer Part Number:28H287 (AEON‑CL)
Package Size:5 Gallon (18.9L)
Viscosity Grade:ISO VG46 PAO / Diester synthetic‑blend lubricant
Application:Matched Gardner‑Denver oil‑injected rotary screw air compressor
Information suggested before quotation:
1. Full compressor serial‑number
2. Confirm existing lubricant type from compressor service manual
3. Confirm working environment: indoor clean / dusty / high‑humidity site
Service‑life Reference Guidance
‑ Clean indoor stable‑load workshop: Up to 8000 operating hours (reference value only)
‑ Dusty / high‑condensation / heavy‑load workshop: Shorten oil‑change cycle significantly
‑ Authoritative replacement trigger: Periodic laboratory oil‑analysis report, instead of runtime counter only.
Core Functional Benefits
1. Excellent thermal‑oxidative stability, resist varnish & carbon‑sludge formation
PAO‑diester blended base stock resists high‑temperature oxidation inside compressor oil‑circuit. Reduce varnish deposit on rotor, oil cooler and separator tank, keep internal system clean and lower risk of over‑temperature alarm.
2. Good demulsibility for condensed water separation
Effective separation of condensed moisture generated inside compressor. Reduce risk of oil emulsification in high‑humidity workshop, protect bearing and rotor assembly from corrosion damage.
3. Wear‑protection for rotor‑bearing assembly
Special additive package maintains stable lubricating‑film under variable load condition, reduces metal friction wear for main air‑end bearings and rotor profile, extending core component service‑life.
4. Low volatility, reduce oil‑carry‑over consumption
Low‑volatility synthetic formulation lowers oil mist loss during compression cycle, decreases frequent oil top‑up work for production‑critical compressors.
5. Good sealing‑material compatibility
Compatible with standard elastomer gaskets and seals inside matched Gardner‑Denver screw compressor, avoid seal swelling or hardening risk.
Technical Specification
| Parameter | Value | Reference Test Standard |
|---|---|---|
| Part Number | 28H287 (AEON‑CL) | Gardner‑Denver lubricant spec |
| Package | 5 Gallon (18.9L) | - |
| Base‑oil Type | PAO / Diester synthetic blend | - |
| ISO Viscosity Grade | VG 46 | ASTM D445 |
| Flash Point | 268°C (515°F) | ASTM D92Gardner De... |
| Pour Point | ‑54°C (‑65°F) | ASTM D97Gardner De... |
| Reference service life | Up to 8000 hrs (clean‑environment reference only) | - |
| MOQ | 1 Pail | - |
| Shipment | DHL/FedEx/UPS express, air freight, sea freight | |
| Payment Terms | T/T, PayPal, Western Union, Visa | |
| Important Remark | For rotary screw compressor only; DO NOT mix with mineral / semi‑synthetic oil |
Typical Application Scenarios
This 28H287 AEON‑‑CL synthetic lubricant applies for industrial sites running matched Gardner‑Denver oil‑injected screw compressors:
‑ General manufacturing & metal‑working workshops
‑ Automotive painting & assembly facilities
‑ Plastic processing factories
‑ 24‑hour continuous‑run light‑industry compressed‑air stations
Evaluate oil‑change or stock‑up requirement when you observe oil discoloration, increased foam, or receive abnormal oil‑analysis laboratory report.
Good Customers Review

On‑Site Oil‑Change & Storage Guidance
Safety Warning: Strictly perform full LOTO lock‑out‑tag‑out procedure. Compressor oil circuit will retain high‑temperature hot fluid after operation; avoid hot‑oil scald injury. Collect waste‑oil and implement environmental‑compliant disposal, do not spill on‑site.
1. Pre‑oil‑change preparation
Run compressor for short period to warm‑up lubricant (hot‑oil improves contaminant discharging). Shut‑down, cut power, release system pressure. Prepare waste‑oil collecting container.
Critical: Drain old oil as completely as possible. Residual degraded old‑oil mixed into new lubricant will degrade new‑oil performance rapidly.
2. Oil‑filter synchronous replacement recommendation
Strongly suggest replacing oil‑filter element synchronously during oil‑change, remove solid contaminants trapped inside old filter cartridge.
3. New lubricant filling work
Fill 28H287 AEON‑CL synthetic oil to sight‑glass specified level. Do NOT overfill; over‑filling will cause heavy oil‑carry‑over inside compressed‑air output. Close filling port tightly.
4. Post‑change commissioning & observation
Restart compressor, run under normal load for 30‑60 minutes. Observe oil level, check for oil leakage at drain port and connections. Record oil‑change date, runtime baseline for future maintenance reference.
5. Lubricant storage rules
Store sealed pail at 10‑25℃ cool dry place, avoid direct sunlight and temperature‑cycle condensation. Follow FIFO first‑in‑first‑out stock‑management. After opening pail, consume lubricant within 6‑12 months, prevent moisture ingress.
Frequently Asked Questions
Q1: Can I mix 28H287 AEON‑CL synthetic oil with mineral‑base compressor oil?
A: Not allowed. Different‑chemistry oil mixing will generate varnish and carbon sludge inside oil‑circuit, blind filter / separator, cause high‑temperature trip‑out. Must fully drain old‑oil before filling new AEON‑‑‑CL lubricant.
Q2: Shall I replace oil strictly at 8000 running‑hours?
A: 8000‑hour is reference value for clean ideal‑condition workshop. Dusty, high‑humidity heavy‑load sites shorten real‑world service life. Periodic laboratory oil‑analysis report is more reliable judgement than runtime counter.
Q3: What is difference between 28H287 AEON‑CL and 28H109 AEON‑9000SP?
A: They are different‑formula Gardner‑Denver synthetic lubricants, cannot substitute arbitrarily. Please refer to your compressor original service‑manual to confirm correct part‑number.
Q4: Does 28H287 AEON‑CL work for reciprocating piston compressor or hydraulic system?
A: No. This lubricant is engineered for oil‑injected rotary screw compressor, not suitable for reciprocating units and hydraulic circuits.
Q5: What risk if I only partially drain old oil before adding new 28H287?
A: Remaining degraded old lubricant contaminates fresh synthetic oil, accelerates new‑oil oxidation and sludge‑forming, greatly shortens actual service‑life of new lubricant.
Why Source 28H287 AEON‑CL Lubricant From Us
‑ Pre‑order compatibility cross‑check: Submit compressor serial‑number, we verify whether AEON‑CL 28H287 matches your unit before shipment.
‑ Goods condition inspection: Check pail sealing integrity, no leakage, no storage‑damage before packing.
‑ Flexible global logistics: Express for small‑quantity urgent stock‑up; sea‑freight solution for bulk‑project procurement.
‑ Technical‑reference support: Provide oil‑change checklist and lubricant‑selection suggestion after order confirmation.
Request Quotation for 28H287 AEON‑CL 5‑Gallon Lubricant
📧 infor@aircompressorglobal.com
Hot Tags: 28H287 AEON‑CL 5Gal Lubricant | Gardner‑Denver Screw Compressor Oil, China 28H287 AEON‑CL 5Gal Lubricant | Gardner‑Denver Screw Compressor Oil manufacturers, suppliers, 28H214, Gardner Denver 5 Gallon Synthetic Oil, 28H39 6000FG 46 , Gardner Denver 5 Gallon Compressor Oil Replacement, Gardner Denver one gallon AEON 4000
