Tips: Due to the wide variety of air dryer, it may not be possible to display them all on the website. If you need any, please contact us by email or phone.
Product Description
This Heated Air Dryer for Compressed Air System 40m3/min operates on a heated blower purge principle, where ambient air is used for regeneration instead of compressed air, significantly reducing purge consumption to an average of 2%. The process begins with moist air entering the dryer, passing through a coalescing pre-filter to remove contaminants. Air is then directed to one desiccant tower for adsorption, while the offline tower is regenerated using heated blower air in a counter-current flow. This method prevents desiccant channeling and extends media life. Key components include stainless steel desiccant supports, high-performance butterfly valves for quick response, and a fail-safe design that maintains drying airflow during power failures. The integrated DPC controller with LCD display monitors operations, including heater status and alarm indicators, ensuring uninterrupted performance. The system is designed for upflow drying and downflow depressurization, with a 10-minute parallel flow phase at switch-over to minimize moisture spikes.
Product Advantage
1.High Reliability
Features a fail-safe design with stainless steel components and NEMA 4/IP54-rated enclosures, protecting against environmental factors and ensuring durability in harsh conditions. Bi-mode operation allows switching to heatless mode during heater malfunctions, providing system redundancy.
2.Superior Air Quality
Delivers ISO Class 2 or Class 1 pressure dew point (-40°C PDP, optionally configurable to -70°C), ensuring contaminant-free air for sensitive applications. The humidity sensor enables continuous dew point monitoring.
3.User-Friendly Operation
Equipped with a programmable PLC controller, color screen, and remote iConn capabilities for real-time monitoring and alerts. Silencing exhaust reduces noise, enhancing workplace safety.
Technical Parameters
|
Parameter |
Unit |
Description |
|
Working Pressure |
bar |
7 |
|
Exhaust volume |
m3/min |
40 |
|
Motor power |
kw |
20 |
|
Voltage/frequency |
v/Hz |
380/50 |
|
Cooling Type |
/ |
Water Cooled |
|
Dimension(l*w*h) |
mm |
2140*1300*2630 |
Product Application
1.Pharmaceutical and Food Processing
Meets strict hygiene standards with ISO Class 1 air, suitable for environments where oil-free air is critical to avoid contamination. The desiccant towers are rated for continuous 10 bar g operation, handling high-pressure demands.
2.Energy and Chemical Plants
Operates reliably in harsh conditions with NEMA 4 protection, resisting dust and moisture. The bi-mode feature provides backup during power fluctuations, essential for safety-critical processes.
3.Laboratories and Healthcare
Delivers consistent -40°C PDP for sensitive instruments, with low noise output for worker-friendly environments. Remote monitoring via iConn allows proactive maintenance in noise-sensitive areas.
Product Operate Guide
1.Pre-Startup Check
Verify electrical connections (AC380V/3P/50Hz) and ensure inlet air pressure is within 0.6-1.0 MPa. Inspect pre and after-filters for blockages; replace if necessary to maintain air quality.
2.Startup Procedure
Power on the Heated Air Dryer for Compressed Air System 40m3/min via the main switch. The PLC controller will initiate a self-test; monitor the LCD screen for status indicators (e.g., dryer on, tower regeneration). Allow a 10-minute warm-up for heater stabilization.
3.Normal Operation
Air flows downward through the online desiccant tower. The controller automatically switches towers every 5-10 minutes, with parallel flow to prevent dew point spikes. Monitor pressure gauges and temperature displays to ensure smooth transitions. Use the remote start/stop control for convenience.
4.Regeneration Cycle
During regeneration, the blower draws ambient air, heats it externally, and passes it counter-current through the offline tower. Check purge exhaust valves for proper closure in fail-safe mode if power fails. Average purge consumption should not exceed 2%.
5.Maintenance and Alerts
Perform quarterly checks on desiccant beds (replace every 3 years) and filters. The system alerts via PLC for issues like heater failure or shift failure; reset manually if alarms activate. Utilize the manual stepping function for troubleshooting.
6.Shutdown and Safety
Turn off the heater first to cool down, then power down the unit. In case of fire, the safety relief valve protects against over-pressurization. For long-term storage, depressurize towers and cover to prevent dust ingress.
Hot Tags: heated air dryer for compressed air system 40m3/min, China heated air dryer for compressed air system 40m3/min manufacturers, suppliers

